Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions

IEC 61784-3:2010(E) series explains some common principles than can be used in the transmission of safety-relevant messages among participants within a distributed network using fieldbus technology in accordance with the requirements of IEC 61508 series for functional safety. These principles can be used in various industrial applications such as process control, manufacturing automation and machinery. This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision. The main changes with respect to the previous edition are: - clarifications and additional explanations for requirements, updated references; - updates of definitions and requirements in relation with the new edition of IEC 61508; - addition of a new informative Annex D providing an assessment guideline; - addition of new parts for CPF 8, CPF 12, CPF 13, CPF 14; - in CPF parts, addition of an annex to provide information about test laboratories for testing and validating conformance of FSCP products.

Industrielle Kommunikationsnetze - Profile - Teil 3: Funktional sichere Übertragung bei Feldbussen - Allgemeine Regeln und Profilfestlegungen

Réseaux de communication industriels - Partie 3: Bus de terrain à sécurité fonctionnelle - Règles générales et définitions des profils

La CEI 61784-3:2010 définit des principes communs pouvant être appliqués pour la transmission des messages propres à la sécurité entre les participants d'un réseau réparti, en utilisant la technologie de bus de terrain conformément aux exigences de la série CEI 61508 concernant la sécurité fonctionnelle. Ces principes peuvent être utilisés dans diverses applications industrielles, telles que la commande de processus, l'usinage automatique et les machines. Cette seconde édition annule et remplace la première édition parue en 2007 et constitue une révision technique. Les principales modifications par rapport à l'édition précédente sont: - clarifications et explications complémentaires des exigences, références actualisées; - actualisations des définitions et exigences par rapport à la nouvelle édition de la CEI 61508; - ajout d'une nouvelle Annexe D informative fournissant une ligne directrice relative à l'évaluation; - actualisations des parties pour les CPF 1, CPF 2, CPF 3, CPF 6 (détails fournis dans les parties); - ajout de nouvelles parties pour les CPF 8, CPF 12, CPF 13, CPF 14; - dans les parties CPF, ajout d'une annexe afin de fournir des informations concernant les laboratoires d'essais, en vue d'une vérification par des essais et d'une validation de la conformité des produits FSCP. La présente version bilingue, correspond à la version anglaise monolingue publié en 2010-07.

Industrijska komunikacijska omrežja - Profili - 3. del: Funkcijska varnost procesnih vodil (IEC 61784-3:2010)

Ta del serije IEC 61784-3 razlaga nekatera skupna načela, ki se jih lahko uporabi pri prenosu za varnost pomembnih sporočil med udeleženci, v okviru porazdeljenega omrežja z uporabo tehnologije procesnih vodil v skladu z zahtevami IEC 61508 serije 1 za funkcijsko varnost. Ta načela se lahko uporabljajo pri različnih industrijskih uporabah, kot so procesni nadzor, proizvodnja avtomatizacija in stroji. Ta del 2 in deli IEC 61784-3-x določajo več komunikacijskih profilov za funkcijsko varnost, osnovanih na komunikacijskih profilih, ter protokolne plasti procesnih vodil v serijah IEC 61784-1, IEC 61784-2 in IEC 61158. OPOMBA 1: Drugi z varnostjo povezani komunikacijski sistemi, ki izpolnjujejo zahteva serije IEC 61508, so lahko prisotni, ki niso vključeni v ta standard. OPOMBA 2: Ne zajema električne varnosti in pripadajočih varnostnih vidikov. Električna varnost je povezana z nevarnostmi kot električni šok. Notranja varnost se nanaša na nevarnosti, ki so povezane s potencialno eksplozivnimi atmosferami. Vsi sistemi so izpostavljeni nepooblaščenemu dostopu na neki točki svojega življenjskega cikla. Treba je preučiti dodatne ukrepe pri kateri koli z varnostjo povezani uporabi za varovanje sistemov procesnih vodil pred nepooblaščenim dostopom Serije IEC 62443 bodo naslovile številna izmed teh vprašanja; odnos s serijami IEC 62443 je podrobno opisan v namenski podklavzuli tega dela. OPOMBA 3: Dodatne zahteve za  varnost, značilne za profile, so lahko opredeljene tudi v IEC 61784-43 [10]. OPOMBA 4: Izvedba funkcijske varnosti komunikacijskega profila v skladu s tem delom v napravi ne zadostuje temu, da bi ustrezala varnostni napravi, kot je opredeljena v serijah 61508. OPOMBA 5: Izhajajoča SIL zahteva sistema je odvisna od izvedbe izbrane funkcijske varnosti komunikacijskega profila znotraj sistema.

General Information

Status
Withdrawn
Publication Date
12-Aug-2010
Withdrawal Date
30-Jun-2013
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Jun-2019
Completion Date
17-Jun-2019

Relations

Buy Standard

Standard
EN 61784-3:2010
English language
64 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2010
1DGRPHãþD
kSIST FprEN 61784-3:2009/kFprA1:2009
SIST EN 61784-3:2008
Industrijska komunikacijska omrežja - Profili - 3. del: Funkcijska varnost procesnih
vodil (IEC 61784-3:2010)
Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses (IEC
61784-3:2010)
Industrielle Kommunikationsnetze - Profile - Teil 3: Funktional sichere Übertragung bei
Feldbussen - Allgemeine Regeln und Profilfestlegungen (IEC 61784-3:2010)
Réseaux de communication industriels - Partie 3: Bus de terrain à sécurité fonctionnelle -
Règles générales et définitions des profils (CEI 61784-3:2010)
Ta slovenski standard je istoveten z: EN 61784-3:2010
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61784-3
NORME EUROPÉENNE
August 2010
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.05 Supersedes EN 61784-3:2008

English version
Industrial communication networks -
Profiles -
Part 3: Functional safety fieldbuses -
General rules and profile definitions
(IEC 61784-3:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Partie 3: Bus de terrain à sécurité Profile -
fonctionnelle - Teil 3: Funktional sichere Übertragung bei
Règles générales et définitions des profils Feldbussen -
(CEI 61784-3:2010) Allgemeine Regeln und Profilfestlegungen
(IEC 61784-3:2010)
This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-3:2010 E
Foreword
The text of document 65C/591A/FDIS, future edition 2 of IEC 61784-3, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-3 on 2010-07-01.
This European Standard supersedes EN 61784-3:2008.
The main technical changes with respect to EN 61784-3:2008 are listed below:
– clarifications and additional explanations for requirements, updated references;
– updates of definitions and requirements in relation with the new edition of EN 61508;
– addition of a new informative Annex D providing an assessment guideline;
– updates in parts for CPF 1, CPF 2, CPF 3, CPF 6 (details provided in the parts);
– addition of new parts for CPF 8, CPF 12, CPF 13, CPF 14;
– in CPF parts, addition of an annex to provide information about test laboratories for testing and
validating conformance of FSCP products.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-07-01
Annex ZA has been added by CENELEC.
__________
- 3 - EN 61784-3:2010
Endorsement notice
The text of the International Standard IEC 61784-3:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60204-1 NOTE  Harmonized as EN 60204-1.
IEC 61496 series NOTE  Harmonized in EN 61496 series (partially modified).
IEC 61508-4:2010 NOTE  Harmonized as EN 61508-4:2010 (not modified).
IEC 61508-5:2010 NOTE  Harmonized as EN 61508-5:2010 (not modified).
IEC 61508-6:2010 NOTE  Harmonized as EN 61508-6:2010 (not modified).
IEC 61511 series NOTE  Harmonized in EN 61511 series (not modified).
IEC 61800-5-2 NOTE  Harmonized as EN 61800-5-2.
IEC 62061 NOTE  Harmonized as EN 62061.
ISO 10218-1 NOTE  Harmonized as EN ISO 10218-1.
ISO 12100-1 NOTE  Harmonized as EN ISO 12100-1.
ISO 13849-1 NOTE  Harmonized as EN ISO 13849-1.
ISO 13849-2 NOTE  Harmonized as EN ISO 13849-2.
ISO 14121 NOTE  Harmonized as EN ISO 14121.
__________
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61131-2 - Programmable controllers - EN 61131-2 -
Part 2: Equipment requirements and tests

IEC 61158 Series Industrial communication networks - EN 61158 Series
Fieldbus specifications
IEC 61326-3-1 - Electrical equipment for measurement, EN 61326-3-1 -
control and laboratory use -
EMC requirements -
Part 3-1: Immunity requirements for safety-
related systems and for equipment intended to
perform safety-related functions (functional
safety) - General industrial applications

IEC 61326-3-2 - Electrical equipment for measurement, EN 61326-3-2 -
control and laboratory use -
EMC requirements -
Part 3-2: Immunity requirements for safety-
related systems and for equipment intended to
perform safety-related functions (functional
safety) - Industrial applications with specified
electromagnetic environment
IEC 61508 Series Functional safety of EN 61508 Series
electrical/electronic/programmable electronic
safety-related systems
IEC 61508-1 2010 Functional safety of EN 61508-1 2010
electrical/electronic/programmable electronic
safety-related systems -
Part 1: General requirements
IEC 61508-2 - Functional safety of EN 61508-2 -
electrical/electronic/programmable electronic
safety-related systems -
Part 2: Requirements for
electrical/electronic/programmable electronic
safety-related systems
IEC 61784-1 - Industrial communication networks - Profiles - EN 61784-1 -
Part 1: Fieldbus profiles
IEC 61784-2 - Industrial communication networks - Profiles - EN 61784-2 -
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC 8802-3

- 5 - EN 61784-3:2010
Publication Year Title EN/HD Year

IEC 61784-3-1 - Industrial communication networks - Profiles - EN 61784-3-1 -
Part 3-1: Functional safety fieldbuses -
Additional specifications for CPF 1

IEC 61784-3-2 - Industrial communication networks - Profiles - EN 61784-3-2 -
Part 3-2: Functional safety fieldbuses -
Additional specifications for CPF 2

IEC 61784-3-3 - Industrial communication networks - Profiles - EN 61784-3-3 -
Part 3-3: Functional safety fieldbuses -
Additional specifications for CPF 3

IEC 61784-3-6 - Industrial communication networks - Profiles - EN 61784-3-6 -
Part 3-6: Functional safety fieldbuses -
Additional specifications for CPF 6

IEC 61784-3-8 - Industrial communication networks - Profiles - EN 61784-3-8 -
Part 3-8: Functional safety fieldbuses -
Additional specifications for CPF 8

IEC 61784-3-12 - Industrial communication networks - Profiles - EN 61784-3-12 -
Part 3-12: Functional safety fieldbuses -
Additional specifications for CPF 12

IEC 61784-3-13 - Industrial communication networks - Profiles - EN 61784-3-13 -
Part 3-13: Functional safety fieldbuses -
Additional specifications for CPF 13

IEC 61784-3-14 - Industrial communication networks - Profiles - EN 61784-3-14 -
Part 3-14: Functional safety fieldbuses -
Additional specifications for CPF 14

IEC 61784-5 Series Industrial communication networks - Profiles - EN 61784-5 Series
Part 5: Installation of fieldbuses - Installation
profiles for CPF x
IEC 61918 - Industrial communication networks - EN 61918 -
Installation of communication networks in
industrial premises
IEC 62280-1 2002 Railway applications - Communication, - -
signalling and processing systems -
Part 1: Safety-related communication in
closed transmission systems
IEC 62443 Series Industrial communication networks - Network - -
and system security
IEC 61784-3 ®
Edition 2.0 2010-06
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 3: Functional safety fieldbuses – General rules and profile definitions

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 25.040.40; 35.100.05 ISBN 978-2-88910-948-7
– 2 – 61784-3 © IEC:2010(E)
CONTENTS
FOREWORD.6
0 Introduction .8
0.1 General .8
0.2 Patent declaration .10
1 Scope.11
2 Normative references .11
3 Terms, definitions, symbols, abbreviated terms and conventions .13
3.1 Terms and definitions .13
3.1.1 Common terms and definitions .13
3.1.2 CPF 1: Additional terms and definitions .18
3.1.3 CPF 2: Additional terms and definitions .18
3.1.4 CPF 3: Additional terms and definitions .18
3.1.5 CPF 6: Additional terms and definitions .18
3.1.6 CPF 8: Additional terms and definitions .18
3.1.7 CPF 12: Additional terms and definitions .18
3.1.8 CPF 13: Additional terms and definitions .18
3.1.9 CPF 14: Additional terms and definitions .18
3.2 Symbols and abbreviated terms.19
3.2.1 Common symbols and abbreviated terms .19
3.2.2 CPF 1: Additional symbols and abbreviated terms .19
3.2.3 CPF 2: Additional symbols and abbreviated terms .19
3.2.4 CPF 3: Additional symbols and abbreviated terms .19
3.2.5 CPF 6: Additional symbols and abbreviated terms .20
3.2.6 CPF 8: Additional symbols and abbreviated terms .20
3.2.7 CPF 12: Additional symbols and abbreviated terms .20
3.2.8 CPF 13: Additional symbols and abbreviated terms .20
3.2.9 CPF 14: Additional symbols and abbreviated terms .20
4 Conformance.20
5 Basics of safety-related fieldbus systems .21
5.1 Safety function decomposition.21
5.2 Communication system .21
5.2.1 General .21
5.2.2 IEC 61158 fieldbuses .21
5.2.3 Communication channel types .22
5.2.4 Safety function response time.22
5.3 Communication errors .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.