HD 134.7 S2:1995

Radio-frequency connectors - Part 7: R.F. coaxial connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with bayonet lock - Characteristic impedance 50 ohm (Type C)

Gives the dimensions for r.f. coaxial connectors which may preferably be used with r.f. cables 96 IEC 50-7. These connector patterns are for medium power, quick disconnect applications using a bayonet type coupling mechanism.

Hochfrequenz-Steckverbinder - Teil 7: HF Koaxialsteckverbinder mit einem Innendurchmesser des Außenleiters von 9,5 mm mit Bayonett-Verschluß - Wellenwiderstand 50 Ohm (Typ C)

Connecteurs pour fréquences radioélectriques - Partie 7: Connecteurs coaxiaux pour fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 9,5 mm (0,374 in) à verrouillage à baïonnette - Impédance caractéristique 50 ohm (type C)

Donne les dimensions des connecteurs coaxiaux pour fréquences radioélectriques qui peuvent être utilisés de préférence avec des câbles pour fréquences radioélectriques 96 IEC 50-7. Ces modèles de connecteurs sont pour puissance moyenne, avec désaccouplements rapides utilisant un mécanisme d'accouplement du type à baïonnette.

Radio-frequency connectors - Part 7: R.F. coaxial connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with bayonet lock - Characteristic impedance 50 ohms (Type C) (IEC 60169-7:1975 + A1:1993)

General Information

• Status: Withdrawn
• Publication Date: 10-Aug-1995
• ICS: 33.120.30 - RF connectors
• Technical Committee: CLC/SR 46F - RF and microwave passive components
• Drafting Committee: IEC/SC 46F - IEC_SC_46F
• Parallel Committee: IEC/SC 46F - IEC_SC_46F
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 08-Apr-2020
• Ref Project: SIST HD 134.7 S2:1998 - Radio-frequency connectors -- Part 7: R.F. coaxial connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with bayonet lock - Characteristic impedance 50 ohm (Type C)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 134.7 S2:1998
01-april-1998
Radio-frequency connectors - Part 7: R.F. coaxial connectors with inner diameter
of outer conductor 9,5 mm (0,374 in) with bayonet lock - Characteristic impedance
50 ohms (Type C) (IEC 60169-7:1975 + A1:1993)
Radio-frequency connectors -- Part 7: R.F. coaxial connectors with inner diameter of
outer conductor 9,5 mm (0,374 in) with bayonet lock - Characteristic impedance 50 ohm
(Type C)
Hochfrequenz-Steckverbinder -- Teil 7: HF Koaxialsteckverbinder mit einem
Innendurchmesser des Außenleiters von 9,5 mm mit Bayonett-Verschluß -
Wellenwiderstand 50 Ohm (Typ C)
Connecteurs pour fréquences radioélectriques -- Partie 7: Connecteurs coaxiaux pour
fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 9,5 mm
(0,374 in) à verrouillage à baïonnette - Impédance caractéristique 50 ohm (type C)
Ta slovenski standard je istoveten z: HD 134.7 S2:1995
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
SIST HD 134.7 S2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 134.7 S2:1998

---------------------- Page: 2 ----------------------

SIST HD 134.7 S2:1998

---------------------- Page: 3 ----------------------

SIST HD 134.7 S2:1998

---------------------- Page: 4 ----------------------

SIST HD 134.7 S2:1998
NORME CEI
INTERNATIONALE IEC
60169-7
INTERNATIONAL
Première édition
STANDARD
First edition
1975-01
Connecteurs pour fréquences radioélectriques
Septième partie:
Connecteurs coaxiaux pour fréquences
radioélectriques avec diamètre intérieur du
conducteur extérieur de 9,5 mm (0,374 in) à
verrouillage à baïonnette –
Impédance caractéristique 50 ohms (type C)
Radio-frequency connectors
Part 7:
R.F. coaxial connectors with inner diameter of outer
conductor 9.5 mm (0.374 in) with bayonet lock –
Characteristic impedance 50 ohms (Type C)
© IEC 1975 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
R
PRICE CODE
International Electrotechnical Commission
IEC
Me>E1ayHapomiae 3neKTpoTexHH4ecnaR HOMHCCHA
Pour prix, voir catalogue en vigueur
• • For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST HD 134.7 S2:1998
— 3 —
CONTENTS
Page
FOREWORD 5
5
PREFACE
Clause
7
1. Scope
I EC type designation 7
2.
7
3. Ratings
7
4. Climatic categories
8
Dimensions--General purpose connectors 5.
11
6. Gauges and reference connectors
18
Survey of patterns 7.
20
8. Outline dimensions
27
Schedule for type tests 9.

---------------------- Page: 6 ----------------------

SIST HD 134.7 S2:1998
— 5 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
FREQUENCY CONNECTORS
RADIO-
Part 7: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in)
with bayonet lock — Characteristic impedance 50 ohms (Type C)
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on which all the National
1)
Committees having a special interest therein are represented, express, as nearly as possible, an international consensus of opinion
on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National Committees in that sense.
2)
In order to promote international unification, the IEC expresses the wish that all National Committees should adopt the text of the
3)
IEC recommendation for their national rules in so far as national conditions will permit. Any divergence between the IEC recom-
mendation and the corresponding national rules should, as far as possible, be clearly indicated in the latter.
4) The IEC has not laid down any procedure concerning marking as an indication of approval and has no responsibility when an item
of equipment is declared to comply with one of its recommendations.
PREFACE
This publication has been prepared by Sub-Committee 46D, Connectors for R.F. Cables, of I EC Technical Committee No. 46, Cables,
Wires and Waveguides for Telecommunication Equipment. This publication is a revision of IEC Publication 159, Dimensions of the
Mating Parts of Radio-frequency Connectors, concerning r.f. coaxial connectors which may preferably be used with r.f. cable 96 IEC 50-7.
Dur
...