EN 61076-4-107:2001

Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations

This publication also bears the number QC 480301XX0008 which is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ).

Steckverbinder für elektronische Einrichtungen - Teil 4-107: Steckverbinder für gedruckte Schaltungen mit bewerteter Qualität - Bauartspezifikation für geschirmte indirekte Steckverbinder im Raster 2,0 mm, freie Teile mit Löt- und Einpressanschlüssen für Leiterplatten, feste Teile mit nichtzugänglichen Schneidklemm- und Crimpanschlüssen

Connecteurs pour équipements électroniques - Partie 4-107: Connecteurs pour cartes imprimées sous assurance de la qualité - Spécification particulière pour les connecteurs blindés en deux parties, au pas de base de 2,0 mm, partie fixe avec sorties soudées et CIF pour cartes imprimées, partie mobile avec sorties autodénudantes et serties

Cette publication porte également le numéro QC 480301XX0008, qui est le numéro de spécification dans le système CEI d'assurance de la qualité des composants électroniques (IECQ).

Connectors for electronic equipment - Part 4-107: Printed board connections with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp termination (IEC 61076-4-107:2001)

General Information

• Status: Published
• Publication Date: 30-Oct-2001
• Withdrawal Date: 30-Sep-2004
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 31-Oct-2001
• Completion Date: 31-Oct-2001
• Ref Project: SIST EN 61076-4-107:2002 - Connectors for electronic equipment -- Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations

Standards Content (Sample)

SLOVENSKI SIST EN 61076-4-107:2002
prva izdaja
STANDARD
september 2002
Connectors for electronic equipment - Part 4-107: Printed board connections with
assessed quality - Detail specification for shielded two-part connectors having a
basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed
boards, fixed part with solder and press-in terminations for printed boards, free part
with non-accessible insulation displacement and crimp termination (IEC 61076-4-
107:2001)
ICS 31.220.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 61076-4-107
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2001
ICS 31.220.10
English version
Connectors for electronic equipment
Part 4-107: Printed board connectors with assessed quality -
Detail specification for shielded two-part connectors having
a basic grid of 2,0 mm, fixed part with solder and press-in
terminations for printed boards, free part with
non-accessible insulation displacement and crimp terminations
(IEC 61076-4-107:2001)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques Einrichtungen
Partie 4-107: Connecteurs pour cartes Teil 4-107: Steckverbinder für gedruckte
imprimées sous assurance de la qualité – Schaltungen mit bewerteter Qualität -
Spécification particulière pour les Bauartspezifikation für geschirmte indirekte
connecteurs blindés en deux parties, au Steckverbinder im Raster 2,0 mm, freie
pas de base de 2,0 mm, partie fixe avec Teile mit Löt- und Einpressanschlüssen für
sorties soudées et CIF pour cartes Leiterplatten, feste Teile mit
imprimées, partie mobile avec sorties nichtzugänglichen Schneidklemm- und
autodénudantes et serties Crimpanschlüssen
(CEI 61076-4-107:2001) (IEC 61076-4-107:2001)
This European Standard was approved by CENELEC on 2001-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-4-107:2001 E

Foreword
The text of document 48B/1066/FDIS, future edition 1 of IEC 61076-4-107, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-4-107 on 2001-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-10-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-4-107:2001 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 61076-4-107:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance
IEC 60352-2 1990 Solderless connections EN 60352-2 1994
+ A1 1996 Part 2: Solderless crimped connections + A1 1997
- General requirements, test methods
and practical guidance
IEC 60352-3 1993 Part 3: Solderless accessible insulation EN 60352-3 1994
displacement connections - General
requirements, test methods and
practical guidance
IEC 60352-4 1994 Part 4: Solderless non-accessible EN 60352-4 1994
insulation displacement connections -
General requirements, test methods and
practical guidance
IEC 60352-5 2001 Part 5: Press-in connections - General EN 60352-5 2001
requirements, test methods and
practical guidance
IEC 60410 1973 Sampling plans and procedures for--
inspection by attributes
IEC 60512-2 1985 Electromechanical components for--
+ A1 1994 electronic equipment - Basic testing
procedures and measuring methods
Part 2: General examination, electrical
continuity and contact resistance tests,
insulation tests and voltage stress tests
IEC 60512-3 1976 Part 3: Current-carrying capacity tests - -
IEC 60512-4 1976 Part 4: Dynamic stress tests - -

1)
EN 60068-1 includes corrigendum October 1988 + A1:1992 to IEC 60068-1.

Publication Year Title EN/HD Year
IEC 60512-5 1992 Part 5: Impact tests (free components),--
static load tests (fixed components),
endurance tests and overload tests
IEC 60512-7 1993 Part 7: Mechanical operating tests and--
sealing tests
IEC 60512-8 1993 Part 8: Connector tests (mechanical)--
and mechanical tests on contacts and
terminations
IEC 60512-9 1992 Part 9: Miscellaneous tests - -
IEC 60512-11-7 1996 Part 11: Climatic tests - Section 7: EN 60512-11-7 1996
Test 11g: Flowing mixed gas corrosion
test
2)
IEC 60603-1 1991 Connectors for frequencies below EN 60603-1 1998
3 MHz for use with printed boards
Part 1: Generic specification - General
requirements and guide for the
preparation of detail specifications, with
assessed quality
IEC 61076-1 1995 Connectors with assessed quality, for EN 61076-1 1995
use in d.c., low frequency analogue and
in digital high-speed data applications
Part 1: Generic specification - Capability
approval
IEC 61076-4 1995 Part 4: Sectional specification - Printed EN 61076-4 1996
board connectors
IEC 61076-4-001 1996 Part 4: Printed board connectors - EN 61076-4-001 1996
Section 001: Blank detail specification
IEC QC 001002-3 1998 IEC Quality Assessment System for--
Electronic Components (IECQ) - Basic
rules
Part 3: Approval procedures
ISO 1302 1992 Technical drawings - Method of --
indicating surface texture
2)
EN 60603-1 includes A1:1992 to IEC 60603-1.

NORME
CEI
INTERNATIONALE IEC
61076-4-107
INTERNATIONAL
QC 480301XX0008
STANDARD
Première édition
First edition
2001-08
Connecteurs pour équipements électroniques –
Partie 4-107:
Connecteurs pour cartes imprimées sous
assurance de la qualité – Spécification particulière
pour les connecteurs blindés en deux parties, au
pas de base de 2,0 mm, partie fixe avec sorties
soudées et CIF pour cartes imprimées, partie
mobile avec sorties autodénudantes et serties
Connectors for electronic equipment –
Part 4-107:
Printed board connectors with assessed quality –
Detail specification for shielded two-part
connectors having a basic grid of 2,0 mm, fixed
part with solder and press-in terminations for
printed boards, free part with non-accessible
insulation displacement and crimp terminations
© IEC 2001 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
X
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61076-4-107 © IEC:2001 – 3 –
CONTENTS
FOREWORD . 9
1 General data. 15
1.1 Recommended method of mounting . 15
1.2 Ratings and characteristics. 15
1.3 Normative references. 17
1.4 Marking. 19
1.5 IEC type designation. 21
1.6 Ordering information . 21
2 Technical information. 23
2.1 Definitions . 23
2.2 Survey of styles and variants . 23
2.3 Information on application. 23
2.3.1 Complete connectors (pairs) . 23
2.3.2 Fixed board connectors. 23
2.3.3 Free board connectors . 23
2.3.4 Accessories . 25
2.3.5 Shielding/grounding . 25
2.3.6 Basic types of terminations . 25
3 Dimensional information. 25
3.1 General. 25
3.2 Isometric view and common features . 27
3.3 Engagement (mating) information . 27
3.4 Fixed board connectors. 29
3.4.1 Dimensions . 29
3.4.2 Terminations . 31
3.5 Free board connectors . 33
3.5.1 Dimensions . 33
3.5.2 Terminations . 35
3.6 Accessories . 35
3.7 Mounting information for fixed board connectors . 37
3.7.1 Hole pattern on printed board. 37
3.7.2 Mounting on panels. 39
3.8 Mounting information for free board connectors
(cable to cable, cable to panel, cable to printed board) . 43
3.8.1 Connector with standard contacts . 43
3.8.2 Connector with coaxial contacts . 43
3.9 Gauges. 45
3.9.1 Sizing gauges and retention force gauges. 45
3.9.2 Mechanical operation, engaging/separating force,
insertion/withdrawal force gauges . 45
3.9.3 Probes . 45
3.9.4 Contact resistance gauge. 45
3.9.5 Test panels (for voltage proof test). 45

61076-4-107 © IEC:2001 – 5 –
4 Characteristics. 47
4.1 Climatic category .
...