EN 60684-3-100 to 105:2001

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving

Gives the requirements for three types of non-heatshrinkable sleeving, extruded from PVC. Sleeving of this type is normally available with an internal diameter up to 50 mm and in a range of wall thicknesses between 0,2 mm and 1,8 mm. Each sheet covers up to three levels of wall thickness, "thin wall", "standard wall" and "thick wall" related to nominal internal diameter and with corresponding differences in requirements for breakdown voltage. Sheets 100 and 103 cover sleeving having a temperature range of -10 °C to 90 °C. Sheets 101 and 104 cover sleeving having a temperature range of -10 °C to 105 °C. Sheets 102 and 105 cover sleeving having a temperature range of -40 °C to 70 °C.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blätter 100 bis 105: Extrudierte PVC-Schläuche

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuilles 100 à 105: Gaines en PVC extrudé

Donne les prescriptions pour trois types de gaine en PVC extrudé, non thermorétractables. Les gaines de ce type sont généralement fournies avec des diamètres intérieurs allant jusqu'à 50 mm et dans des gammes d'épaisseur de paroi comprises entre 0,2 mm et 1,8 mm. Chaque feuille décrit trois niveaux d'épaisseur de paroi: «paroi mince», «paroi normale», «paroi épaisse», selon le diamètre intérieur nominal, avec, par conséquent, des prescriptions différentes pour la tension de claquage. Les feuilles 100 et 103 couvrent les gaines ayant une gamme de température comprise entre -10 °C et 90 °C. Les feuilles 101 et 104 couvrent les gaines ayant une gamme de température comprise entre -10 °C et 105 °C. Les feuilles 102 et 105 couvrent les gaines ayant une gamme de température comprise entre -40 °C et 70 °C.

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving (IEC 60684-3-100 to 105:2001)

General Information

• Status: Published
• Publication Date: 30-Sep-2001
• Withdrawal Date: 31-Aug-2004
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/SC 15C - IEC_SC_15C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 01-Oct-2001
• Completion Date: 01-Oct-2001
• Ref Project: SIST EN 60684-3-100 to 105:2002 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 100 to 105: Extruded PVC sleeving

Relations

• Replaces: HD 523.3.100 to 105 S1:1990 - Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60684-3-100 to 105:2002
01-oktober-2002
1DGRPHãþD
SIST HD 523.3.100 to 105 S1:1998
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving
- Sheets 100 to 105: Extruded PVC sleeving (IEC 60684-3-100 to 105:2001)
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving --
Sheets 100 to 105: Extruded PVC sleeving
Isolierschläuche -- Teil 3: Anforderungen für einzelne Schlauchtypen -- Blätter 100 bis
105: Extrudierte PVC-Schläuche
Gaines isolantes souples -- Partie 3: Spécifications pour types particuliers de gaines --
Feuilles 100 à 105: Gaines en PVC extrudé
Ta slovenski standard je istoveten z: EN 60684-3-100 to 105:2001
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60684-3-100 to 105:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60684-3-100 to 105:2002

---------------------- Page: 2 ----------------------

SIST EN 60684-3-100 to 105:2002

---------------------- Page: 3 ----------------------
...