EN 60679-1:2007
(Main)Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification
Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification
This part of IEC 60679 specifies the methods of test and general requirements for quartz crystal controlled oscillators of assessed quality using either capability approval or qualification approval procedures. A major change with respect to the previous edition consists in the inclusion of the test requirements of the IECQ system.
Quarzoszillatoren mit bewerteter Qualität - Teil 1: Fachgrundspezifikation
Oscillateurs pilotés par quartz sous assurance de la qualité - Partie 1: Spécification générique
La CEI 60679-1:2007 spécifie les méthodes d'essai et les exigences générales pour les oscillateurs pilotés par quartz dont la qualité est garantie par les procédures d'agrément de savoir-faire ou par les procédures d'homologation. Elle constitue une étape de la révision de toutes les parties de la série CEI 60679 pour incorporer les exigences d'essai du système IECQ. La présente édition est basée sur les normes applicables de ce système.
Kristalni oscilatorji določene kakovosti - 1. del: Rodovna specifikacija (IEC 60679-1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2008
1DGRPHãþD
SIST EN 60679-1:2002
SIST EN 60679-1:2002/A1:2003
SIST EN 60679-1:2002/A2:2004
.ULVWDOQLRVFLODWRUMLGRORþHQHNDNRYRVWLGHO 5RGRYQDVSHFLILNDFLMD ,(&
Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification
(IEC 60679-1:2007)
Quarzoszillatoren mit bewerteter Qualität - Teil 1: Fachgrundspezifikation (IEC 60679-
1:2007)
Oscillateurs pilotés par quartz sous assurance de la qualité - Partie 1: Spécification
générique (IEC 60679-1:2007)
Ta slovenski standard je istoveten z: EN 60679-1:2007
ICS:
31.140
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60679-1
NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM
ICS 31.140 Supersedes EN 60679-1:1998 + A1:2002 + A2:2003
English version
Quartz crystal controlled oscillators of assessed quality -
Part 1: Generic specification
(IEC 60679-1:2007)
Oscillateurs pilotés par quartz Quarzoszillatoren
sous assurance de la qualité - mit bewerteter Qualität -
Partie 1: Spécification générique Teil 1: Fachgrundspezifikation
(CEI 60679-1:2007) (IEC 60679-1:2007)
This European Standard was approved by CENELEC on 2007-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60679-1:2007 E
Foreword
The text of document 49/769/FDIS, future edition 3 of IEC 60679-1, prepared by IEC TC 49, Piezoelectric
and dielectric devices for frequency control and selection, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 60679-1 on 2007-05-01.
This European Standard supersedes EN 60679-1:1998 + A1:2002 + A2:2003.
It represents a step in a revision of all parts of the EN 60679 series to include the test requirements of the
IECQ system. EN 60679-1:2007 is based on the relevant standards of that system.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-02-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60679-1:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60122-1 NOTE Harmonized as EN 60122-1:2002 (not modified).
IEC 60679-3 NOTE Harmonized as EN 60679-3:2001 (not modified).
IEC 60679-4 NOTE Harmonized as EN 60679-4:1998 (not modified).
IEC 61000-4-3 NOTE Harmonized as EN 61000-4-3:2006 (not modified).
__________
- 3 - EN 60679-1:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
1)
IEC 60050-561 - International Electrotechnical Vocabulary - -
(IEV) -
Part 561: Piezoelectric devices for frequency
control and selection
IEC 60068-1 1988 Environmental testing -
+ corr. October 1988 Part 1: General and guidance
+ A1 1992 EN 60068-1 1994
1) 2)
IEC 60068-2-1 - Environmental testing - EN 60068-2-1 2007
Part 2: Tests - Test A: Cold
1) 2)
IEC 60068-2-2 - Environmental testing - EN 60068-2-2 1993
Part 2: Tests - Tests B: Dry heat
1) 2)
IEC 60068-2-6 - Environmental testing - EN 60068-2-6 1995
Part 2: Tests - Test Fc: Vibration (sinusoidal)
1) 2)
IEC 60068-2-7 - Environmental testing - EN 60068-2-7 1993
Part 2: Tests - Test Ga: Acceleration, steady
state
1) 2)
IEC 60068-2-10 - Environmental testing - EN 60068-2-10 2005
Part 2-10: Tests - Test J and guidance: Mould
growth
1) 2)
IEC 60068-2-13 - Environmental testing - EN 60068-2-13 1999
Part 2: Tests - Test M: Low air pressure
1) 2)
IEC 60068-2-14 - Environmental testing - EN 60068-2-14 1999
Part 2: Tests - Test N: Change of temperature
1) 2)
IEC 60068-2-17 - Environmental testing - EN 60068-2-17 1994
Part 2: Tests - Test Q: Sealing
1) 2)
IEC 60068-2-20 - Environmental testing - HD 323.2.20 S3 1988
Part 2: Tests - Test T: Soldering
1) 2)
IEC 60068-2-21 - Environmental testing - EN 60068-2-21 2006
Part 2-21: Tests - Test U: Robustness of
terminations and integral mounting devices
1)
Undated reference.
2)
Valid edition at date of issue.
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-27 - Environmental testing - EN 60068-2-27 1993
Part 2: Tests - Test Ea and guidance: Shock
1) 2)
IEC 60068-2-29 - Environmental testing - EN 60068-2-29 1993
Part 2: Tests - Test Eb and guidance: Bump
1) 2)
IEC 60068-2-30 - Environmental testing - EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
1) 2)
IEC 60068-2-32 - Environmental testing - EN 60068-2-32 1993
Part 2: Tests - Test Ed: Free fall
1) 2)
IEC 60068-2-45 - Environmental testing - EN 60068-2-45 1992
Part 2: Tests - Test Xa and guidance:
Immersion in cleaning solvents
1) 2)
IEC 60068-2-52 - Environmental testing - EN 60068-2-52 1996
Part 2: Tests - Test Kb: Salt mist, cyclic
(sodium chloride solution)
1) 2)
IEC 60068-2-58 - Environmental testing - EN 60068-2-58 2004
Part 2-58: Tests - Test Td: Test methods for + corr. December 2004
solderability, resistance to dissolution of
metallization and to soldering heat of surface
mounting devices (SMD)
1) 2)
IEC 60068-2-64 - Environmental testing - EN 60068-2-64 1994
Part 2: Test methods - Test Fh: Vibration,
broad-band random (digital control) and
guidance
IEC 60068-2-78 2001 Environmental testing - EN 60068-2-78 2001
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60469-1 1987 Pulse techniques and apparatus - - -
Part 1: Pulse terms and definitions
IEC 60617 Data- Graphical symbols for diagrams - -
base
1) 2)
IEC 60679-5 - Quartz crystal controlled oscillators of EN 60679-5 1998
assessed quality -
Part 5: Sectional specification - Qualification
approval
1) 2)
IEC 61000-4-2 - Electromagnetic compatibility (EMC) - EN 61000-4-2 1995
Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity
test
1)
IECQ 01 - IEC Quality Assessment System for - -
Electronic Components (IECQ) - Basic Rules
IEC QC 001002-2 1998 IEC Quality Assessment System for - -
Electronic Components (IECQ) - Rules of
Procedure -
Part 2: Documentation
- 5 - EN 60679-1:2007
Publication Year Title EN/HD Year
IEC QC 001002-3 1998 IEC Quality Assessment System for - -
Electronic Components (IECQ) - Rules of
Procedure -
Part 3: Approval procedures
1)
ISO 1000 - SI units and recommendations for the use of - -
their multiples and of certain other units
1)
ITU-T G.810 - Definitions and terminology for - -
synchronization networks
1)
ITU-T G.811 - Timing characteristics of primary reference - -
clocks
1)
ITU-T G.812 - Timing requirements of slave clocks suitable - -
for use as node clocks in synchronization
networks
1)
ITU-T G.813 - Timing characteristics of SDH equipment - -
slave clocks (SEC)
1)
ITU-T G.825 - The control of jitter and wander within digital - -
networks which are based on the
synchronous digital hierarchy (SDH)
1)
ANSI T1.101 - Synchronization Interface Standard - -
1)
ANSI T1.105.03 - Synchronous Optical Network (SONET) - - -
Jitter at network Interfaces
ETSI EN 300 462 Series Transmission and Multiplexing (TM); Generic - -
requirements for synchronization networks
1)
Telcordia GR-253 - Synchronous Optical Network (SONET) - -
Transport Systems: Common Generic Criteria
INTERNATIONAL IEC
STANDARD 60679-1
Third edition
2007-04
Quartz crystal controlled oscillators
of assessed quality –
Part 1:
Generic specification
PRICE CODE
Commission Electrotechnique Internationale
XC
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – 60679-1 © IEC:2007(E)
CONTENTS
FOREWORD.5
1 Scope.7
2 Normative references .7
3 Terms, definitions and general information .9
3.1 General .9
3.2 Definitions .9
3.3 Preferred values for ratings and characteristics .19
3.4 Marking .21
4 Quality assessment procedures.21
4.1 Primary stage of manufacture.21
4.2 Structurally similar components.21
4.3 Subcontracting .22
4.4 Incorporated components .22
4.5 Manufacturer’s approval .22
4.6 Approval procedures .22
4.7 Procedures for capability approval .23
4.8 Procedures for qualification approval.23
4.9 Test procedures .24
4.10 Screening requirements .24
4.11 Rework and repair work.24
4.12 Certified test records .24
4.13 Validity of release.24
4.14 Release for delivery .24
4.15 Unchecked parameters.25
5 Test and measurement procedures.25
5.1 General .25
5.2 Test and measurement conditions .25
5.3 Visual inspection .26
5.4 Dimensions and gauging procedures .27
5.5 Electrical test procedures .27
5.6 Mechanical and environmental test procedures .70
5.7 Endurance test procedure .76
Annex A (normative) Load circuit for logic drive .
Annex B (normative) Latch-up test.81
Annex C (normative) Electrostatic discharge sensitivity classification .82
Bibliography.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.