EN 61029-2-1:2012
(Main)Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches
Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches
Applies to transportable circular saws intended for cutting wood and similar materials with a blade diameter not exceeding 260 mm.
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-1: Besondere Anforderungen an Tischkreissägen
Sécurité des machines-outils électriques semi-fixes - Partie 2-1: Règles particulières pour les scies circulaires à table
S'applique aux scies circulaires semi-fixes, destinées à couper du bois et des matériaux similaires et ayant un diamètre de lame maximal de 260 mm.
Varnost premičnih električnih orodij - 2-1. del: Posebne zahteve za krožne žage z delovno mizo
Ta mednarodni standard se uporablja za premične krožne žage, namenjene rezanju lesa in podobnih materialov, katerih premer rezila je manjši od 260 mm, kot je določeno v točki 2.101.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-1: Besondere Anforderungen an TischkreissägenSécurité des machines outils électrique semi-fixes - Partie 2-1: Règles particulières pour les scies circulaires à tableSafety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches25.140.20Electric tools25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 61029-2-1:2012SIST EN 61029-2-1:2013en01-marec-2013SIST EN 61029-2-1:2013SLOVENSKI
STANDARD
SIST EN 61029-2-1:2013
EUROPEAN STANDARD EN 61029-2-1 NORME EUROPÉENNE
EUROPÄISCHE NORM October 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61029-2-1:2012 E
ICS 25.140.20 Supersedes EN 61029-2-1:2010
English version
Safety of transportable motor-operated electric tools -
Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993, modified + A1:1999 + A2:2001)
Sécurité des machines-outils électriques semi-fixes -
Partie 2-1: Règles particulières pour les scies circulaires à table (CEI 61029-2-1:1993, modifiée + A1:1999 + A2:2001)
Sicherheit transportabler motorbetriebener Elektrowerkzeuge -
Teil 2-1: Besondere Anforderungen an Tischkreissägen (IEC 61029-2-1:1993, modifiziert + A1:1999 + A2:2001)
This European Standard was approved by CENELEC on 2012-09-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 61029-2-1:2013
EN 61029-2-1:2012 – 2 – Contents Foreword . 41Scope . 62Definitions . 63General requirement . 64General notes on tests . 65Rating . 66Classification . 67Marking and information for use . 78Protection against electric shock . 89Starting . 810Input and current . 811Heating . 812Leakage current . 813Environmental requirements . 914Protection against ingress of foreign bodies and moisture resistance . 915Insulation resistance and electric strength . 916Endurance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.