EN 62841-3-1:2014
(Main)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)
IEC 62841-3-1:2014 applies to transportable table saws with: - a toothed single blade; or - stacked blades that cut a single groove or slot; or - a moulding head cutter intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter between 105 mm and 315 mm, which hereinafter may simply be referred to as saw or tool. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. This standard does not apply to table saws intended to cut other metals, such as magnesium, steel and iron. This standard does not apply to table saws with an automatic feeding device. This standard does not apply to saws designed for use with abrasive wheels. This standard does not apply to table saws with more than one spindle such as for a scoring blade. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Table Saw, Transportable This publication is to be read in conjunction with IEC 62841-1:2014.
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-1: Besondere Anforderungen für transportable Tischkreissägen (IEC 62841-3-1:2014, modifiziert)
Outils électroportatifs à moteur, outils transportables et machines pour jardins et pelouses - Sécurité - Partie 3-1: Exigences particulières pour les scies circulaires à table transportables (IEC 62841-3-1:2014, modifiée)
IEC 62841-3-1:2014 s'applique aux scies circulaires à table transportables munies: - d'une unique lame dentée; ou - de lames superposées qui coupe d'une simple rainure; ou - d'un couteau de coupe de moulure pour la coupe du bois et de matériaux analogues, de plastiques et de métaux non ferreux à l'exception du magnésium, la lame de la scie ayant un diamètre entre 105 mm et 315 mm, celle-ci pouvant être simplement désignée ci-après comme scie ou outil. La tension assignée est inférieure à 250 V pour les outils à courant monophasé alternatif ou continu, et inférieure à 480 V pour les outils à courant alternatif triphasé. La tension assignée est inférieure à 3 700 W. Les limites d'application de la présente Norme aux outils fonctionnant sur batterie sont indiquées dans l'annexe K. La présente norme ne s'applique pas aux scies circulaires à table utilisées pour couper d'autres métaux, tels que le magnésium, l'acier et le fer. La présente norme ne s'applique pas aux scies circulaires à table, équipées d'un appareil d'alimentation automatique. La présente norme ne s'applique pas aux scies destinées à être utilisées avec un disque abrasif. La présente norme ne s'applique pas aux scies circulaires à table comportant plus d'un arbre telles que les scies à inciser. La présente Partie 3-1 doit être utilisée conjointement avec la première édition de l'IEC 62841-1. L'attention des Comités Nationaux est attirée sur le fait que les fabricants d'appareils et les organismes d'essai peuvent avoir besoin d'une période transitoire après la publication d'une nouvelle publication CEI, ou d'une publication amendée ou révisée, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs équipements aux nouveaux essais ou aux essais révisés. Le comité recommande que le contenu de cette publication soit entériné au niveau national au plus tôt 36 mois après la date de publication. Mots-clés: Outils à main, Tournevis, Clé à chocs Cette publication doit être lue conjointement avec la CEI 62841-1:2014.
Električna motorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-1. del: Posebne zahteve za prenosne namizne žage (IEC 62841-3-1:2014)
Standard EN IEC 62841-3-1 se uporablja za prenosne namizne žage z – enim samim nazobčanim rezilom ali – več rezili, ki zarežejo en sam utor ali režo; – ali rezalnike z glavo za oblikovanje, namenjene rezanju lesa in podobnih materialov, plastike ter nebarvnih kovin, razen magnezija, s premerom rezila žage med 105 mm in 315 mm, v nadaljnjem besedilu lahko le: žaga ali orodje. Ta standard se ne uporablja za namizne žage, namenjene rezanju drugih materialov, kot so magnezij, jeklo in železo. Ta standard se ne uporablja za namizne žage s samodejnim podajalnikom. Ta standard se ne uporablja za stroje, namenjene uporabi z brusilnimi ploščami.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2014
1DGRPHãþD
SIST EN 61029-2-1:2013
(OHNWULþQDPRWRUQDURþQDRURGMDSUHQRVQDRURGMDWHUVWURML]DWUDWRLQYUW9DUQRVW
GHO 3RVHEQH]DKWHYH]DSUHQRVQHQDPL]QHåDJH ,(&
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden
Machinery - Safety - Part 3-1: Particular requirements for transportable table saws
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 3-1: Exigences particulières relatives aux scies stationnaires
transportables
Ta slovenski standard je istoveten z: EN 62841-3-1:2014
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62841-3-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2014
ICS 25.140.20 Supersedes EN 61029-2-1:2012
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-1: Particular
requirements for transportable table saws
(IEC 62841-3-1:2014)
Outils électroportatifs à moteur, outils transportables et Elektrische motorbetriebene handgeführte Werkzeuge,
machines pour jardins et pelouses - Sécurité - Partie 3-1: transportable Werkzeuge und Rasen- und
Exigences particulières pour les scies circulaires à table Gartenmaschinen - Sicherheit - Teil 3-1: Besondere
transportables Anforderungen für transportable Tischkreissägen
(CEI 62841-3-1:2014) (IEC 62841-3-1:2014)
This European Standard was approved by CENELEC on 2014-05-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-3-1:2014 E
Foreword
The text of document 116/168/FDIS, future edition 1 of IEC 62841-3-1, prepared by IEC/TC 116
"Safety of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62841-3-1:2014.
A draft amendment, which covers common modifications to IEC 62841-3-1:2014, was prepared by
CLC/TC 116 "Safety of motor-operated electric tools" and approved by CENELEC.
The following dates are fixed:
(dop) 2015-05-19
• latest date by which this document
has to be implemented at national
level by publication of an identical
national standard or by endorsement
• latest date by which the national (dow) 2018-05-19
standards conflicting with this
document have to be withdrawn
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101.
This European Standard is divided into four parts:
Part 1: General requirements which are common to most electric motor operated tools (for the
purpose of this standard referred to simply as tools) which could come within the scope of
this standard;
Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics of
these specific tools.
1)
This Part 3-1 is to be used in conjunction with EN 62841-1:201X . When this standard states "addition",
"modification" or "replacement", the relevant text in Part 1 is to be adapted accordingly.
Compliance with the clauses of Part 1 together with this Part 3-1 provides one means of conforming with the
essential health and safety requirements of the Directive concerned.
Warning: Other requirements and other EU Directives can be applicable to the products falling within the
scope of this standard.
This European Standard follows the overall requirements of EN ISO 12100.
NOTE In this standard the following print types are used:
- requirements proper; in roman type
- test specifications: in italic type;
- explanatory matter: in smaller roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are
also in bold.
NOTE Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-3-1:2014 are prefixed “Z”.
———————
1)
At draft stage.
- 3 - EN 62841-3-1:2014
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
COMMON MODIFICATIONS
1 Scope
Add after the first paragraph:
This standard applies to table saws having a mass of:
– maximum 25 kg for tools capable of being lifted by hand by one person;
– maximum 50 kg for tools capable of being lifted by hand by two persons.
This standard does not apply to stationary table saws.
NOTE EN 1870-1 gives requirements for stationary table saws and table saws with a mass greater than indicated above.
2 Normative references
Add the following normative reference:
EN 847-1, Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades
8 Marking and instructions
8.14.2 a):
Add the following new item:
Z101) Instruction to use only saw blades recommended by the manufacturer, which conform to EN 847-1, if
intended for wood and analogous materials.
19 Mechanical hazards
Replace the first paragraph of 19.1 as follows:
19.1 Replacement:
Protective enclosures and guards shall not be removable without the aid of a tool. This requirement does not
apply to saw blade guards, riving knives.
21 Construction
Add the following new subclause:
21.101.Z101 The saw blade provided with the tool, if intended for cutting wood and analogous materials,
shall comply with EN 847-1.
Compliance is checked by inspection and by receipt of relevant information from the saw blade
manufacturer.
- 5 - EN 62841-3-1:2014
Replace the title of Annex I by the following:
Annex I
(normative)
Measurement of noise and vibration emissions
Add the following annexes:
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
ISO 180 - Plastics – Determination of Izod impact EN ISO 180 -
strength
Annex ZZ
(informative)
Coverage of Essential Requirements of Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers all relevant
Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive).
Compliance with this standard provides one means of conformity with the specified essential requirements of
the Directives concerned.
WARNING: Other requirements and other EU Directives may be applicable to the products falling within the
scope of this standard.
Bibliography
Add the following to the bibliography:
EN 1870-1, Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches
(with and without sliding table), dimension saws and building site saws
___________
IEC 62841-3-1 ®
Edition 1.0 2014-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric motor-operated hand-held tools, transportable tools and lawn and
garden machinery – Safety –
Part 3-1: Particular requirements for transportable table saws
Outils électroportatifs à moteur, outils transportables et machines pour jardins
et pelouses – Sécurité –
Partie 3-1: Exigences particulières pour les scies circulaires à table
transportables
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX X
ICS 25.140.20 ISBN 978-2-8322-1571-5
– 2 – IEC 62841-3-1:2014 © IEC 2014
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General requirements . 10
5 General conditions for the tests . 11
6 Radiation, toxicity and similar hazards . 11
7 Classification . 11
8 Marking and instructions . 11
9 Protection against access to live parts . 16
10 Starting . 17
11 Input and current . 17
12 Heating . 17
13 Resistance to heat and fire . 17
14 Moisture resistance . 17
15 Resistance to rusting . 17
16 Overload protection of transformers and associated circuits . 17
17 Endurance . 17
18 Abnormal operation . 17
19 Mechanical hazards . 18
20 Mechanical strength . 25
21 Construction . 27
22 Internal wiring . 37
23 Components . 37
24 Supply connection and external flexible cords . 37
25 Terminals for external conductors . 37
26 Provision for earthing . 37
27 Screws and connections . 37
28 Creepage distances, clearances and distances through insulation . 37
Annex
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.