iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60534-6-1:1997

(Main)

Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators

Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators

Intended to permit a variety of positioning devices, which respond to a linear motion, to be mounted on the actuator of a control valve, either directly or by employing an intermediate mounting bracket. Applicable where interchangeability between actuators and positioners is desired.

Stellventile für die Prozeßregelung - Montage-Einzelheiten zur Befestigung von Stellungsreglern an Stellventil-Antriebe - Hauptabschnitt 1: Montage von Stellungsreglern an Hubantriebe

Vannes de régulation des processus industriels - Partie 6: Détails d'assemblage pour le montage des positionneurs sur les actionneurs de vannes de régulation - Section 1: Montage des positionneurs sur les actionneurs linéaires

A pour objectif de permettre à plusieurs systèmes de positionnement qui répondent à un mouvement rectiligne d'être montés sur l'actionneur d'une vanne de régulation, soit directement soit en utilisant un support de montage intermédiaire. S'applique lorsqu'on souhaite que les actionneurs et les positionneurs soient interchangeables.

Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)

General Information

Status
Published
Publication Date
14-Oct-1997
Withdrawal Date
30-Jun-1998
ICS
23.060.40 - Pressure regulators
25.040.40 - Industrial process measurement and control
Technical Committee
CLC/TC 65X - Industrial-process measurement, control and automation
Drafting Committee
IEC/SC 65B - IEC_SC_65B
Parallel Committee
IEC/SC 65B - IEC_SC_65B
Current Stage
6060 - Document made available - Publishing
Start Date
15-Oct-1997
Completion Date
15-Oct-1997
Ref Project
SIST EN 60534-6-1:1998 - Industrial-process control valves -- Part 6: Mounting details for attachment of positioners to control valves -- Section 1: Positioner mounting on linear actuators

Buy Standard

EN 60534-6-1:1998EN 60534-6-1:1998
PreviousNext
Standard
EN 60534-6-1:1998
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60534-6-1:1998
01-november-1998
Industrial-process control valves - Part 6: Mounting details for attachment of
positioners to control valves - Section 1: Positioner mounting on linear actuators
(IEC 60534-6-1:1997)
Industrial-process control valves -- Part 6: Mounting details for attachment of positioners
to control valves -- Section 1: Positioner mounting on linear actuators
Stellventile für die Prozeßregelung -- Montage-Einzelheiten zur Befestigung von
Stellungsreglern an Stellventil-Antriebe -- Hauptabschnitt 1: Montage von
Stellungsreglern an Hubantriebe
Vannes de régulation des processus industriels -- Partie 6: Détails d'assemblage pour le
montage des positionneurs sur les actionneurs de vannes de régulation -- Section 1:
Montage des positionneurs sur les actionneurs linéaires
Ta slovenski standard je istoveten z: EN 60534-6-1:1997
ICS:
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 60534-6-1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60534-6-1:1998

---------------------- Page: 2 ----------------------

SIST EN 60534-6-1:1998

---------------------- Page: 3 ----------------------

SIST EN 60534-6-1:1998

---------------------- Page: 4 ----------------------

SIST EN 60534-6-1:1998
NORME
CEI
INTERNATIONALE
IEC
60534-6-1
INTERNATIONAL
Première édition
STANDARD
First edition
1997-08
Vannes de régulation des processus industriels –
Partie 6:
Détails d’assemblage pour le montage
des positionneurs sur les actionneurs
de vannes de régulation –
Section 1: Montage des positionneurs
sur les actionneurs linéaires
Industrial-process control valves –
Part 6:
Mounting details for attachment of
positioners to control valves –
Section 1: Positioner mounting on
linear actuators
 IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
N
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST EN 60534-6-1:1998
60534-6-1 © IEC:1997 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
1 Scope and object . 7
2 Definitions. 7
3 Basic design principles. 7
4 Feedback connection . 9
5 Mounting plate design . 9
6 Actuator yoke mounting. 9
Figures. 11

---------------------- Page: 6 ----------------------

SIST EN 60534-6-1:1998
60534-6-1 © IEC:1997 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
INDUSTRIAL-PROCESS CONTROL VALVES –
Part 6: Mounting details for attachment of positioners to control valves –
Section 1: Positioner mounting on linear actuators
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also particip
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60534-1:2023(Main)
Industrial-process control valves - Part 1: Control valve terminology and general considerations
SIST EN IEC 60534-1:2023

IEC 60534-1:2023 is available as IEC 60534-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60534-1:2023 applies to all types of industrial-process control valves (hereinafter referred to as control valves). This document establishes a partial basic terminology list and provides guidance on the use of all other parts of IEC 60534.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60534-3-1:2019(Main)
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
SIST EN IEC 60534-3-1:2019

This part of IEC 60534 specifies face-to-face (FTF) and centre-to-face (CTF) dimensions for given nominal sizes and pressure ratings of flanged, two-way, globe-type, straight pattern and angle pattern control valves. The nominal sizes included are DN 15 to DN 400 for straight pattern control valves and DN 15 to DN 400 for angle pattern control valves.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60534-2-3:2016(Main)
Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
SIST EN 60534-2-3:2016

IEC 60534-2-3:2015(E) is applicable to industrial-process control valves and provides the flow capacity test procedures for determining the following variables used in the equations given in IEC 60534-2-1: a) flow coefficient C; b) liquid pressure recovery factor without attached fittings FL; c) combined liquid pressure recovery factor and piping geometry factor of a control valve with attached fittings FLP; d) piping geometry factor FP; e) pressure differential ratio factors xT and xTP; f) valve style modifier Fd; g) Reynolds number factor FR. This third edition cancels and replaces the second edition published in 1997, of which it constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Addition of informative Annexes B, C, D, E and F. b) Organizational and formatting changes were made to group technically related subject matter.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60534-8-4:2015(Main)
Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
SIST EN 60534-8-4:2016

IEC 60534-8-4:2015 establishes a method to predict the noise generated in a control valve by liquid flow and the resulting noise level measured downstream of the valve and outside of the pipe. The noise may be generated both by normal turbulence and by liquid cavitation in the valve. Parts of the method are based on fundamental principles of acoustics, fluid mechanics, and mechanics. The method is validated by test data. This third edition cancels and replaces the second edition published 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Hydrodynamic noise is predicted as a function of frequency and b) Elimination of the acoustic power ratio.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60534-2-1:2011/AC:2015(Corrigendum)
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
SIST EN 60534-2-1:2011/AC:2015
  • Corrigendum
    2 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60534-8-2:2011(Main)
Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
SIST EN 60534-8-2:2012

IEC 60534-8-2:2011 includes the method for measuring the sound pressure level due to liquid flow through a control valve and the method for determining the characteristic increase of noise due to the onset of cavitation. It also defines the equipment, methods and procedures for the laboratory measurement of the airborne sound needed to determine these characteristics. Two methods are provided for testing the noise generating characteristics of control valves. The first is a uniform method of measuring the radiated noise from the valve and the associated test piping including fixed flow restrictions through which the test fluid (water) is passing. The second is a procedure for measuring the sound pressure levels within pipe systems upstream and downstream of the valve under fixed operating conditions. This second edition cancels and replaces the first edition published in 1991 and constitutes a technical revision that includes internal noise measurement.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60534-2-1:2011(Main)
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
SIST EN 60534-2-1:2011

IEC 60534-2-1:2011 includes equations for predicting the flow of compressible and incompressible fluids through control valves. The equations for incompressible flow are based on standard hydrodynamic equations for Newtonian incompressible fluids. They are not intended for use when non-Newtonian fluids, fluid mixtures, slurries or liquid-solid conveyance systems are encountered. The equations for incompressible flow may be used with caution for non-vaporizing multi-component liquid mixtures. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. It includes the following significant technical changes with respect to the previous edition: - the same fundamental flow model, but changes the equation framework to simplify the use of the standard by introducing the notion of Δpsizing; - changes to the non-turbulent flow corrections and means of computing results; - multi-stage sizing as an Annex.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60534-8-3:2011(Main)
Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
SIST EN 60534-8-3:2011

IEC 60534-8-3:2010 establishes a theoretical method to predict the external sound-pressure level generated in a control valve and within adjacent pipe expanders by the flow of compressible fluids. This method considers only single-phase dry gases and vapours and is based on the perfect gas laws. It is assumed that the downstream piping is straight for a length of at least 2 m from the point where the noise measurement is made. The method is applicable to the following single-stage valves: - globe (straight pattern and angle pattern), - butterfly, - rotary plug (eccentric, spherical), - ball, and - valves with cage trims. Specifically excluded are the full bore ball valves where the product FpC exceeds 50 % of the rated flow coefficient. This third edition cancels and replaces the second edition published in 2000. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows: - predicting noise as a function of frequency; - using laboratory data to determine the acoustical efficiency factor.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60534-7:2010(Main)
Industrial-process control valves - Part 7: Control valve data sheet
SIST EN 60534-7:2011

IEC 60534-7:2010 provides a list of requirements that are necessary for the procurement of the majority of control valves for process systems. The list is arranged to assist the specification writer with a standardized presentation of data and also to be a basis for use with data processing facilities. A detailed set of instructions is included in order to ensure that the abbreviated terms are fully understood and that consistent data entries are always made. This second edition cancels and replaces the first edition published in 1989. This edition constitutes a technical revision The main changes with respect to the previous edition are: - the standard has been updated to reflect digital electronic accessories and fieldbus protocols; - to aid clarification, the explanation of terms and definitions contains the same subheading as the information required in the control valve data sheet; - the column numbering system has been replaced with descriptive title headings.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60534-2-4:2009(Main)
Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability
SIST EN 60534-2-4:2009

IEC 60534-2-4:2009 applies to all types of industrial-process control valves. It defines how to state typical control valve inherent flow characteristics and inherent rangeabilities. It also defines how to establish criteria for adherence to manufacturer-stated flow characteristics. This edition constitutes a technical revision. The main changes with respect to the previous edition are: - update the normative references; - delete the terminology included in IEC 60534-1; - transform the previous Note 1 in Clause 6; - redraw the graphics; - delete the previous Figure 3.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day