EN 60534-8-3:2011

Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method

IEC 60534-8-3:2010 establishes a theoretical method to predict the external sound-pressure level generated in a control valve and within adjacent pipe expanders by the flow of compressible fluids. This method considers only single-phase dry gases and vapours and is based on the perfect gas laws. It is assumed that the downstream piping is straight for a length of at least 2 m from the point where the noise measurement is made. The method is applicable to the following single-stage valves: - globe (straight pattern and angle pattern), - butterfly, - rotary plug (eccentric, spherical), - ball, and - valves with cage trims. Specifically excluded are the full bore ball valves where the product FpC exceeds 50 % of the rated flow coefficient. This third edition cancels and replaces the second edition published in 2000. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows: - predicting noise as a function of frequency; - using laboratory data to determine the acoustical efficiency factor.

Stellventile für die Prozessregelung - Teil 8-3: Geräuschbetrachtungen - Berechnungsverfahren zur Vorhersage der aerodynamischen Geräusche von Stellventilen

Vannes de régulation des processus industriels - Partie 8-3: Considérations sur le bruit - Méthode de prédiction du bruit aérodynamique des vannes de régulation

La CEI 60534-8-3:2010 établit une méthode théorique pour prévoir le niveau de pression acoustique externe engendré dans une vanne de régulation et dans les raccords adjacents par le débit d'un fluide compressible. Cette méthode ne considère que les régimes monophasiques de gaz et vapeurs secs, et est basée sur la loi des gaz parfaits. On suppose que la tuyauterie aval comprend une longueur droite d'au moins 2 m à partir du point de mesure du bruit. La méthode est applicable aux vannes mono-étagées suivantes: - à soupape (droites et d'équerre), - à papillon, - à obturateur rotatif (excentré, sphérique), - à tournant sphérique, et - aux vannes à cage. Les vannes à tournant sphérique à passage direct, pour lesquelles le produit FpC dépasse 50 % du coefficient de débit assigné, sont spécifiquement exclues. Cette troisième édition annule et remplace la deuxième édition parue en 2000. Cette édition constitue une révision technique. Par rapport à l'édition précédente, les modifications techniques majeures sont les suivantes: - la prédiction du bruit en fonction de la fréquence; - l'utilisation des données de laboratoire pour déterminer le coefficient de rendement acoustique.

Regulacijski ventili za industrijske procese - 8-3. del: Šum - Metoda napovedovanja aerodinamičnega šuma regulacijskega ventila (IEC 60534-8-3:2010)

Ta standard vzpostavlja teoretično metodo za napovedovanje zunanjega nivoja zračnega pritiska, ki se naredi v regulacijskem ventilu in v bližnjih razširjevalcih cevi s pretokom stisljivih tekočin. Ta metoda upošteva samo enofazne suhe pline in hlape in temelji na zakonih popolnega plina. Predvideva se, da je dovodno cevje ravno z dolžino vsaj 2 m od točke, kjer so bile izvedene meritve šuma. Metoda velja za naslednje enostopenjske ventile: – kroglasti (ravni vzorec ali kotni vzorec); – metuljasti – rotacijski ventil z vtičem (ekscentrični, sferični); – krogla in – ventili s prirezanimi kletkami. Izrecno izvzeti so polni kroglasti ventili, kjer produktni FpC presega 50 % ocenjenega koeficienta pretoka. Ta tretja izdaja razveljavlja in nadomešča drugo izdajo, objavljeno leta 2000. Ta izdaja je tehnična revizija. Večje tehnične spremembe glede na prejšnjo izdajo so naslednje: – napovedovanje šuma kot funkcije frekvence; – uporaba laboratorijskih podatkov za določanje faktorjev akustične učinkovitosti.

General Information

• Status: Published
• Publication Date: 20-Jan-2011
• Withdrawal Date: 31-Dec-2013
• ICS: 17.140.20 - Noise emitted by machines and equipment
• ICS: 23.060.40 - Pressure regulators
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65B - IEC_SC_65B
• Parallel Committee: IEC/SC 65B - IEC_SC_65B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 21-Jan-2011
• Completion Date: 21-Jan-2011
• Ref Project: SIST EN 60534-8-3:2011 - Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method (IEC 60534-8-3:2010)

Relations

• Replaces: EN 60534-8-3:2000 - Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
• Effective Date: 29-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vannes de régulation des processus industriels - Partie 8-3: Considérations sur le bruit - Méthode de prédiction du bruit aérodynamique des vannes de régulation (IEC 60534-8-3:2010)Vannes de régulation des processus industriels - Partie 8-3: Considérations sur le bruit - Méthode de prévision du bruit aérodynamique des vannes de régulation (CEI 60534-8-3:2010)Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method (IEC 60534-8-3:2010)25.040.40Merjenje in krmiljenje industrijskih postopkovIndustrial process measurement and control23.060.40Pressure regulators17.140.20Emisija hrupa naprav in opremeNoise emitted by machines and equipmentICS:Ta slovenski standard je istoveten z:EN 60534-8-3:2011SIST EN 60534-8-3:2011en01-marec-2011SIST EN 60534-8-3:2011SLOVENSKI
STANDARDSIST EN 60534-8-3:20011DGRPHãþD



SIST EN 60534-8-3:2011



EUROPEAN STANDARD EN 60534-8-3 NORME EUROPÉENNE
EUROPÄISCHE NORM January 2011
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60534-8-3:2011 E
ICS 17.140.20; 23.060.40; 25.040.40 Supersedes EN 60534-8-3:2000
English version
Industrial-process control valves -
Part 8-3: Noise considerations -
Control valve aerodynamic noise prediction method (IEC 60534-8-3:2010)
Vannes de régulation des processus industriels -
Partie 8-3: Considérations sur le bruit -
Méthode de prédiction du bruit aérodynamique des vannes de régulation(CEI 60534-8-3:2010)
Stellventile für die Prozessregelung -
Teil 8-3: Geräuschbetrachtungen -
Berechnungsverfahren zur Vorhersage der aerodynamischen Geräusche von Stellventilen
(IEC 60534-8-3:2010)
This European Standard was approved by CENELEC on 2011-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60534-8-3:2011



EN 60534-8-3:2011 - 2 - Foreword The text of document 65B/765/FDIS, future edition 3 of IEC 60534-8-3, prepared by IEC/SC 65B, Devices & process analysis, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60534-8-3 on
2011-01-01. This European Standard supersedes EN 60534-8-3:2000. The significant technical changes with respect to EN 60534-8-3:2000 are as follows: – predicting noise as a function of frequency; – using laboratory data to determine the acoustical efficiency factor. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2011-10-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2014-01-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60534-8-3:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[1] IEC 60534-2-1 NOTE
Harmonized as EN 60534-2-1. [2] IEC 60534-8-1 NOTE
Harmonized as EN 60534-8-1. __________ SIST EN 60534-8-3:2011



- 3 - EN 60534-8-3:2011 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the l
...