FprEN IEC 61300-2-22:2024
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
D133/C027: DOW = DOR + 12 months
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-22: Prüfungen - Temperaturwechsel
Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-22: Essais - Variations de température
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-22. del: Preskusi - Sprememba temperature
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61300-2-22:2023
01-februar-2023
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-22. del: Preskusi - Sprememba temperature
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-22: Tests - Change of temperature
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-22: Prüfungen - Temperaturwechsel
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-22: Essais - Variations de température
Ta slovenski standard je istoveten z: prEN IEC 61300-2-22:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61300-2-22:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61300-2-22:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61300-2-22:2023
86B/4674/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61300-2-22 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-02 2023-02-24
SUPERSEDES DOCUMENTS:
86B/4545/CD, 86B/4579A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Fibre optic interconnecting devices and passive components - Basic test and measurement
procedures - Part 2-22: Tests - Change of temperature
PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61300-2-22:2023
IEC CDV 61300-2-22/Ed3 IEC:2022 – 2 – 86B/4674/CDV
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 General description . 5
7 5 Apparatus . 6
8 5.1 Environmental test chamber . 6
9 5.2 Examination and measurement equipment . 6
10 6 Procedure . 6
11 6.1 General . 6
12 6.2 Preconditioning . 6
13 6.3 Initial examination and measurement . 6
14 6.4 Setting DUT . 6
15 6.5 Test conditions . 6
16 6.6 Recovery .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.