EN 60512-28-100:2013

Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g

IEC 60512-28-100:2013 specifies the test methods for transmission performance for IEC 60603-7 and IEC 61076-3 series connectors up to 1 000 MHz. It is also suitable for testing lower frequency connectors, however the test methodology specified in the detailed specification for any given connector remains the reference conformance test for that connector. The test methods provided here are: - insertion loss, - return loss, - near-end crosstalk (NEXT), - far-end crosstalk (FEXT), - transverse conversion loss (TCL) and - transverse conversion transfer loss (TCTL). For the transfer impedance (ZT) test, see IEC 60512-26-100. For the coupling attenuation, see IEC 62153-4-12. Keywords: Signal Integrity, Near-end crosstalk, Far-end crosstalk.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 28-100: Signalintegritätsprüfungen bis 1 000 MHz an Steckverbindern der Reihen IEC 60603-7 und IEC 61076-3 - Prüfungen 28a bis 28g

Connecteurs pour équipements électroniques - Essais et mesures - Partie 28-100: Essais d'intégrité des signaux jusqu'à 1 000 MHz sur les connecteurs des séries CEI 60603-7 et CEI 61076-3 - Essais 28a à 28g

La CEI 60512-28-100:2013 spécifie les méthodes d'essais pour les performances des transmissions pour des connecteurs conformes aux séries CEI 60603-7 et CEI 61076-3 jusqu'à 1 000 MHz. Elle s'applique également aux essais de connecteurs de plus basses fréquences, mais la méthodologie d'essai spécifiée dans la spécification particulière pour tout connecteur donné reste l'essai de conformité de référence pour le connecteur en question. Les méthodes d'essai spécifiées ici sont: - perte d'insertion, essai 28a, - affaiblissement de réflexion, essai 28b, - paradiaphonie (NEXT), essai 28c, - télédiaphonie (FEXT), essai 28d, - perte de conversion transverse (TCL), essai 28f, - perte de transfert de conversion transverse (TCTL), essai 28g. Pour l'essai d'impédance de transfert (ZT), voir la CEI 60512-26-100, essai 26e. Pour l'affaiblissement de couplage, voir la CEI 62153-4-12. Mots-clés: intégrité des signaux, paradiaphonie, télédiaphonie

Konektorji za elektronsko opremo - Preskusi in meritve - 28-100. del: Preskusi signalne celovitosti do 1 000 MHz na konektorjih serij IEC 60603-7 in IEC 61076-3 - Preskusi od 28a do 28g

Ta del IEC 60512 določa načine testiranja delovanja prenosa za IEC 60603-7 in IEC 61076-3 serijske konektorje do 1000 MHz. Primerna je tudi za testiranje konektorjev z nižjimi frekvencami, vendar metodologija testiranja, določena v podrobnih specifikacijah za kateri koli konektor ostaja test referenčne skladnosti za posamezni konektor.
V nadaljevanju so podane naslednje preskusne metode:
– dodano dušenje, preskus 28a;
– povratno dušenje, preskus 28b;
– bližnji presluh (NEXT), preskus 28c;
– daljni presluh (FEXT), preskus 28d;
– prečno dušenje pretvorbe (TCL), preskus 28f;
– prečno dušenje pretvorbe prenosa (TCTL), preskus 28g.
Za preskus impedance prenosa (ZT) glejte IEC 60512-26-100, preskus 26e.
Za slabljenje stikov glejte IEC 62153-4-12.

General Information

• Status: Withdrawn
• Publication Date: 04-Apr-2013
• Withdrawal Date: 12-Mar-2016
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Dec-2022
• Completion Date: 19-Dec-2022
• Ref Project: SIST EN 60512-28-100:2013 - Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g

Relations

• Replaced By: EN IEC 60512-28-100:2019 - Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2013
Konektorji za elektronsko opremo - Preskusi in meritve - 28-100. del: Preskusi
signalne celovitosti do 1 000 MHz na konektorjih serij IEC 60603-7 in IEC 61076-3 -
Preskusi od 28a do 28g
Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal
integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors -
Tests 28a to 28g
/
Connecteurs pour équipements électroniques - Essais et mesures - Partie 28-100:
Essais d'intégrité du signal jusqu'à 1 000 MHz sur des connecteurs conformes aux séries
CEI 60603-7 et CEI 61076-3 - Essais 28a à 28g
Ta slovenski standard je istoveten z: EN 60512-28-100:2013
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60512-28-100
NORME EUROPÉENNE
April 2013
EUROPÄISCHE NORM
ICS 31.220.10
English version
Connectors for electronic equipment -
Tests and measurements -
Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7
and IEC 61076-3 series connectors - Tests 28a to 28g
(IEC 60512-28-100:2013)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Essais et mesures - Einrichtungen -
Partie 28-100: Essais d'intégrité Mess- und Prüfverfahren -
des signaux jusqu'à 1 000 MHz Teil 28-100: Signalintegritätsprüfungen
sur les connecteurs des séries bis 1 000 MHz an Steckverbindern der
CEI 60603-7 et CEI 61076-3 - Reihen IEC 60603-7 und IEC 61076-3 -
Essais 28a à 28g Prüfungen 28a bis 28g
(CEI 60512-28-100:2013) (IEC 60512-28-100:2013)

This European Standard was approved by CENELEC on 2013-03-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-28-100:2013 E

Foreword
The text of document 48B/2322/FDIS, future edition 1 of IEC 60512-28-100, prepared by SC 48B
“Connectors” of IEC/TC 48 “Electromechanical components and mechanical structures for electronic
equipment” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has (dop) 2013-12-13
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-03-13
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60512-28-100:2013 was approved by CENELEC as a
European Standard without any modification.

- 3 - EN 60512-28-100:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-581 - International Electrotechnical Vocabulary - -
(IEV) -
Part 581: Electromechanical components
for electronic equipment
IEC 60512-1 - Connectors for electronic equipment - EN 60512-1 -
Tests and measurements -
Part 1: General
IEC 60512-26-100 2008 Connectors for electronic equipment - EN 60512-26-100 2008
Tests and measurements -
Part 26-100: Measurement setup, test
and reference arrangements and
measurements for connectors according
to IEC 60603-7 - Tests 26a to 26g

IEC 60603-7 Series Connectors for electronic equipment EN 60603-7 Series

IEC 61076-1 - Connectors for electronic equipment - EN 61076-1 -
Product requirements -
Part 1: Generic specification
IEC 61076-3-104 - Connectors for electronic equipment - EN 61076-3-104 -
Product requirements -
Part 3-104: Detail specification for 8-way,
shielded free and fixed connectors for data
transmissions with frequencies
up to 1 000 MHz
IEC 61076-3-110 - Connectors for electronic equipment - EN 61076-3-110 -
Product requirements -
Part 3-110: Detail specification for shielded,
free and fixed connectors for data
transmission with frequencies
up to 1 000 MHz
IEC 61156 Series Multicore and symmetrical pair/quad cables - -
for digital communications -
Part 1-2: Electrical transmission
characteristics and test methods of
symmetrical pair/quad cables
IEC 61156-6 - Multicore and symmetrical pair/quad cables - -
for digital communications -
Part 6: Symmetrical pair/quad cables with
transmission characteristics up to 1 000 MHz
- Work area wiring - Sectional specification

Publication Year Title EN/HD Year
IEC 61169-16 - Radio-frequency connectors - EN 61169-16 -
Part 16: RF coaxial connectors with inner
diameter of outer conductor 7 mm (0,276 in)
with screw coupling - Characteristic
impedance 50 ohms (75 ohms) (Type N)

IEC 62153-4-12 - Metallic communication cable test methods - - -
Part 4-12: Electromagnetic compatibility
(EMC) - Coupling attenuation or screening
attenuation of connecting hardware -
Absorbing clamp method
ISO/IEC 11801 - Information technology - Generic cabling for - -
customer premises
IEC 60512-28-100 ®
Edition 1.0 2013-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Tests and measurements –

Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and

IEC 61076-3 series connectors – Tests 28a to 28g

Connecteurs pour équipements électroniques – Essais et mesures –

Partie 28-100: Essais d'intégrité des signaux jusqu'à 1 000 MHz sur les

connecteurs des séries CEI 60603-7 et CEI 61076-3 – Essais 28a à 28g

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 31.220.10 ISBN 978-2-83220-639-3

– 2 – 60512-28-100 © IEC:2013
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and acronyms . 8
3.1 Terms and definitions . 8
3.2 Acronyms . 8
4 Overall test arrangement . 9
4.1 Test instrumentation . 9
4.2 Measurement precautions . 9
4.3 Mixed mode S-parameter nomenclature . 10
4.4 Coaxial cables and interconnect for network analysers . 11
4.5 Requirements for switching matrices . 11
4.6 Test fixture requirements . 12
4.7 Requirements for termination performance at calibration plane. 13
4.8 Reference loads for calibration . 13
4.9 Calibration . 14
4.10 Termination loads for termination of conductor pairs . 14
4.10.1 General . 14
4.10.2 Verification of termination loads . 15
4.11 Termination of screens . 15
4.12 Test specimen and reference planes . 15
4.12.1 General . 15
4.12.2 Interconnections between device under test (DUT) and the
calibration plane . 16
4.13 Overall test setup requirements . 18
5 Connector measurement up to 1 000 MHz . 18
5.1 General . 18
5.2 Insertion loss, Test 28a . 19
5.2.1 Object. 19
5.2.2 Connecting hardware insertion loss . 19
5.2.3 Test method . 19
5.2.4 Test set-up . 19
5.2.5 Procedure . 19
5.2.6 Test report . 20
5.2.7 Accuracy . 20
5.3 Return loss, Test 28b . 20
5.3.1 Object. 20
5.3.2 Connecting hardware return loss . 20
5.3.3 Test method . 20
5.3.4 Test set-up . 21
5.3.5 Procedure . 21
5.3.6 Test report . 21
5.3.7 Accuracy . 21
5.4 Near-end crosstalk (NEXT), Test 28c . 21
5.4.1 Object. 21
5.4.2 Connecting hardware NEXT . 21

60512-28-100 © IEC:2013 – 3 –
5.4.3 Test method . 21
5.4.4 Test set-up . 22
5.4.5 Procedure . 22
5.4.6 Test report . 23
5.4.7
...