EN 60317-0-3:1998/A2:2004
(Amendment)Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
Superseded by EN 60317-0-3:2008
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-3: Allgemeine Anforderungen - Runddrähte aus Aluminium, lackisoliert
Spécifications pour types particuliers de fils de bobinage - Partie 0-3: Prescriptions générales - Fil de section circulaire en aluminium émaillé
Specifikacije za posebne tipe navitij – 0-3. del: Splošne zahteve – Emajliran okrogel aluminijev vodnik (IEC 60317-0-3:1997/A2:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60317-0-
3:2001/A2:2005
STANDARD
april 2005
Specifikacije za posebne tipe navitij – 0-3. del: Splošne zahteve – Emajliran
okrogel aluminijev vodnik (IEC 60317-0-3:1997/A2:2004)
Specifications for particular types of winding wires – Part 0-3: General requirements
– Enamelled round aluminum wire (IEC 60317-0-3:1997/A2:2004)
ICS 29.060.10 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60317-0-3/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2004
ICS 29.060.10
English version
Specifications for particular types of winding wires
Part 0-3: General requirements –
Enamelled round aluminium wire
(IEC 60317-0-3:1997/A2:2004)
Spécifications pour types particuliers Technische Lieferbedingungen für
de fils de bobinage bestimmte Typen von Wickeldrähten
Partie 0-3: Prescriptions générales – Teil 0-3: Allgemeine Anforderungen -
Fil de section circulaire en aluminium Runddrähte aus Aluminium, lackisoliert
émaillé (IEC 60317-0-3:1997/A2:2004)
(CEI 60317-0-3:1997/A2:2004)
This amendment A2 modifies the European Standard EN 60317-0-3:1998; it was approved by CENELEC
on 2004-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-0-3:1998/A2:2004 E
Foreword
The text of document 55/913/FDIS, future amendment 2 to IEC 60317-0-3:1997, prepared by
IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A2 to EN 60317-0-3:1998 on 2004-10-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-08-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2007-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of amendment 2:2004 to the International Standard IEC 60317-0-3:1997 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
- 3 - EN 60317-0-3:1998/A2:2004
Replace Annex ZA by:
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60172 - Test procedure for the determination of EN 60172 1994
the temperature index of enamelled
winding wires
1) 2)
IEC 60317-14 - Specifications for particular types of EN 60317-14 1994
winding wires
Part 14: Polyvinyl acetal enamelled round
aluminium wire, class 105
1) 2)
IEC 60317-25 - Part 25: Polyester or polyesterimide EN 60317-25 1996
overcoated with polyamide-imide
enamelled round aluminium wire,
class 200
IEC 60851 Series Winding wires - Test methods EN 60851 Series
1)
ISO 3 - Preferred
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.