EN 61606-2:2009
(Main)Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 2: Consumer use
Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 2: Consumer use
IEC 61606-2:2009(E) is applicable to the basic measurement methods of the audio characteristics of the digital audio part of audio and audiovisual equipment for consumer use. It specify conditions and methods of measurement for consumer equipment.The common measuring conditions and methods are described in IEC 61606-1. It constitutes a technical revision. The significant technical changes with respect to the first edition are the following: - changed the period of preconditioning; - add A weighting filter in measuring instruments; - correct the wrong reference number; - some inappropriate descriptions have been improved. This publication is to be read in conjunction with IEC 61606-1:2009.
Audio- und audiovisuelle Geräte - Digitale Tonteile - Grundlegende Messverfahren der Audio-Eigenschaften - Teil 2: Allgemeingebrauch
Equipements audio et audiovisuels - Parties audionumériques - Méthodes fondamentales pour la mesure des caractéristiques audio - Partie 2: Utilisation par le consommateur
L'IEC 61606-2:2009 est applicable aux méthodes fondamentales pour la mesure des caractéristiques audio de la partie audionumérique des équipements audio et audiovisuels destinés à l'usage grand public. Les conditions et les méthodes de mesure communes sont décrites par l’IEC 61606-1. La présente Norme internationale spécifie les conditions et les méthodes de mesure relatives aux équipements grand public. L'IEC 61606-2:2009 annule et remplace la première édition publiée en 2003. Elle constitue une révision technique. Les modifications techniques majeures par rapport à la première édition sont les suivantes: - modification de la période de préconditionnement; - adjonction d'un filtre de pondération A dans les appareils de mesure; - correction du numéro de référence erroné; - certaines descriptions inadaptées ont été améliorées.
Avdio in avdiovizualna oprema - Digitalni avdio deli - Osnovne merilne metode zvokovnih karakteristik - 2. del: Splošna (porabniška) uporaba (IEC 61606-2:2009)
Ta del IEC 61606 velja za osnovne metode merjenja zvokovnih karateristik digitalnega avdio dela za avdio in avdiovizualne opremo za potrošniško uporabo. Splošni merilni pogoji in metode so opisani v IEC 61606-1. Ta mednarodni standard določa pogoje in metode merjenja za potrošniško opremo.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Avdio in avdiovizualna oprema - Digitalni avdio deli - Osnovne merilne metode zvokovnih karakteristik - 2. del: Splošna (porabniška) uporaba (IEC 61606-2:2009)Audio- und audiovisuelle Geräte - Digitale Tonteile - Grundlegende Messverfahren der Audio-Eigenschaften - Teil 2: Allgemeingebrauch (CEI 61606-2:2009)Equipements audio et audiovisuels - Parties audionumériques - Méthodes fondamentales pour la mesure des caractéristiques audio - Partie 2 : Utilisation par le consommateur (IEC 61606-2:2009)Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 2: Consumer use (IEC 61606-2:2009)33.160.30Avdio sistemiAudio systemsICS:Ta slovenski standard je istoveten z:EN 61606-2:2009SIST EN 61606-2:2010en01-februar-2010SIST EN 61606-2:2010SLOVENSKI
STANDARDSIST EN 61606-2:20041DGRPHãþD
SIST EN 61606-2:2010
EUROPEAN STANDARD EN 61606-2 NORME EUROPÉENNE
EUROPÄISCHE NORM November 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61606-2:2009 E
ICS 33.160.01 Supersedes EN 61606-2:2004
English version
Audio and audiovisual equipment -
Digital audio parts -
Basic measurement methods of audio characteristics -
Part 2: Consumer use (IEC 61606-2:2009)
Equipements audio et audiovisuels -
Parties audionumériques -
Méthodes fondamentales
pour la mesure
des caractéristiques audio -
Partie 2: Utilisation par le consommateur (CEI 61606-2:2009)
Audio- und audiovisuelle Geräte -
Digitale Tonteile -
Grundlegende Messverfahren
der Audio-Eigenschaften -
Teil 2: Allgemeingebrauch (IEC 61606-2:2009)
This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61606-2:2010
EN 61606-2:2009 - 2 - Foreword The text of document 100/1548/FDIS, future edition 2 of IEC 61606-2, prepared by IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61606-2 on 2009-09-01. This European Standard supersedes EN 61606-2:2004. The significant technical changes with respect to EN 61606-2:2004 are the following: – changed the period of preconditioning; – add A weighting filter in measuring instruments; – correct the wrong reference number; – some inappropriate descriptions have been improved. This Part 2 is to be used in conjunction with EN 61606-1, General. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2010-06-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2012-09-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61606-2:2009 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 61606-2:2010
- 3 - EN 61606-2:2009 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60268-2 –1) Sound system equipment -
Part 2: Explanation of general terms and calculation methods HD 483.2 S2
19932)
IEC 60958 Series Digital audio interface
EN 60958 Series
I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.