EN 62290-1:2006
(Main)Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts
Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts
Provides an introduction to the series of standards IEC 62290 and deals with the main concepts, the system definition, the principles and the main functions of Urban Guided Transport Management and Command/Control Systems (UGTMS).
Bahnanwendungen - Betriebsleit- und Zugsicherungssysteme für den städtischen schienengebundenen Personennahverkehr - Teil 1: Systemgrundsätze und grundlegende Konzepte
Applications ferroviaires - Systèmes de contrôle/commande et de gestion des transports guidés urbains - Partie 1: Principes système et concepts fondamentaux
Fournit une introduction à la série de normes CEI 62290, une présentation des concepts principaux, une définition du système, les principes et les fonctions principales des systèmes de contrôle/commande et de gestion des transports guidés urbains (UGTMS).
Železniške naprave - Komandno-kontrolni sistemi za upravljanje urbanega transporta -- 1. del: Sistemska načela in osnovni koncepti (IEC 62290-1:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2007
Železniške naprave - Komandno - kontrolni sistemi za upravljanje urbanega
transporta -- 1.del: Sistemski principi in osnovni koncepti (IEC 62290-1:2006)
Railway applications - Urban guided transport management and command/control
systems -- Part 1: System principles and fundamental concepts (IEC 62290-1:2006)
Bahnanwendungen - Betriebsleit- und Zugsicherungssysteme für den städtischen
schienengebundenen Personennahverkehr - Teil 1: Systemgrundsätze und
grundlegende Konzepte (IEC 62290-1:2006)
Applications ferroviaires - Systemes de contrôle/commande et de gestion des transports
guidés urbains -- Partie 1: Principes systeme et concepts fondamentaux (IEC 62290-
1:2006)
Ta slovenski standard je istoveten z: EN 62290-1:2006
ICS:
03.220.30 Železniški transport Transport by rail
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62290-1
NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM
ICS 45.060
English version
Railway applications -
Urban guided transport management
and command/control systems
Part 1: System principles and fundamental concepts
(IEC 62290-1:2006)
Applications ferroviaires - Bahnanwendungen -
Systèmes de contrôle/commande Betriebsleit- und Zugsicherungssysteme
et de gestion des transports für den städtischen schienengebundenen
guidés urbains Personennahverkehr
Partie 1: Principes système Teil 1: Systemgrundsätze
et concepts fondamentaux und grundlegende Konzepte
(CEI 62290-1:2006) (IEC 62290-1:2006)
This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62290-1:2006 E
Foreword
The text of document 9/949/FDIS, future edition 1 of IEC 62290-1, prepared by IEC TC 9, Electrical
equipment and systems for railways, was submitted to the IEC-CENELEC parallel vote and was approved
by CENELEC as EN 62290-1 on 2006-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62290-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62290-1:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE 1 When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
NOTE 2 Where a standard cited below belongs to the EN 50000 series, this European Standard applies instead of the relevant
International Standard.
Publication Year Title EN/HD Year
IEC 62236 Series Railway applications - Electromagnetic EN 50121 Series
compatibility
1) 2)
IEC 62278 - Railway applications - Specification and EN 50126-1 1999
demonstration of reliability, availability, + corr. May 2006
maintainability and safety (RAMS)
1)
2)
IEC 62279 - Railway applications - Communications, EN 50128 2001
signalling and processing systems - Software
for railway control and protection systems
1) 2)
IEC 62280-1 - Railway applications - Communication, EN 50159-1 2001
signalling and processing systems
Part 1: Safety-related communication in
closed transmission systems
1) 2)
IEC 62280-2 - Railway applications - Communication, EN 50159-2 2001
signalling and processing systems
Part 2: Safety-related communication in open
transmission systems
1)
Undated reference.
2)
Valid edition at date of issue.
NORME CEI
INTERNATIONALE
IEC
62290-1
INTERNATIONAL
Première édition
STANDARD
First edition
2006-07
Applications ferroviaires –
Systèmes de contrôle/commande et de gestion
des transports guidés urbains –
Partie 1:
Principes système et concepts fondamentaux
Railway applications –
Urban guided transport management
and command/control systems –
Part 1:
System principles and fundamental concepts
IEC 2006 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
U
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
62290-1 IEC:2006 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9
1 Scope.15
2 Normative references .15
3 Terms, definitions and abbreviations .15
3.1 Terms and definitions .15
3.2 Abbreviations .21
4 Concepts .23
4.1 Urban guided transport (UGT) .23
4.2 Grade of automation.25
4.3 Operation management and supervision.33
4.4 Interoperability, interchangeability, compatibility and adaptability .33
5 System environment and boundaries .35
6 General requirements and description of the basic functions .39
6.1 General requirements.39
6.2 Description of the basic functions .43
Bibliography.57
Figure 1 – The three-step process followed by the UGTMS standard .13
Figure 2 – Example of track layout.25
Figure 3 – Example of GOL classification.33
Figure 4 – System environment.37
Table 1 – Grades of automation.29
62290-1 IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RAILWAY APPLICATIONS –
URBAN GUIDED TRANSPORT MANAGEMENT
AND COMMAND/CONTROL SYSTEMS –
Part 1: System principles and fundamental concepts
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62290-1 has been prepared by IEC technical committee 9:
Electrical equipment and systems for railways.
The text of this standard is based on the following documents:
FDIS Report on voting
9/949/FDIS 9/951/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
62290-1 IEC:2006 – 7 –
A list of all parts of IEC 62290 series, under the general title: Railway applications – Urban
guided transport management and command/control systems, can be found on the IEC
website. (See also introduction to this standard.)
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
62290-1 IEC:2006 – 9 –
INTRODUCTION
Standard IEC 62290 specifies the functional, system and interface requirements for the
command, control, and management systems that are used on urban, guided passenger
transport lines and networks. Trains operating on such lines may include heavy-duty
underground (metros) trains, commuter trains, light rail trains,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.