Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers

IEC 60077-4:2019 is available as IEC 60077-4:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60077-4:2019 gives rules for AC circuit-breakers, the main contacts of which are connected to AC overhead contact lines; the nominal voltage of these circuits being in accordance with IEC 60850. This document, together with IEC 60077-2, states specifically: a) the characteristics of the circuit-breakers; b) the service conditions with which circuit-breakers comply with reference to: - operation and behaviour in normal service; - operation and behaviour in short-circuit; - dielectric properties; c) the tests for confirming the compliance of the components with the characteristics under the service conditions and the methods to be adopted for these tests d). the information to be marked on, or given with the circuit-breaker. This second edition cancels and replaces the first edition, issued in 2003. This edition includes the following main technical changes with regard to the previous edition: a) standard values of transient recovery voltages and test procedure are reviewed; b) procedure of verification of temperature rise is changed; c) air-tightness test as type test, insulation resistance measurement are added

Bahnanwendungen - Elektrische Betriebsmittel auf Fahrzeugen - Teil 4: Elektrotechnische Bauteile - Regeln für AC-Leistungsschalter

Applications ferroviaires - Équipements électriques du matériel roulant - Partie 4: Composants électrotechniques - Règles pour disjoncteurs à courant monophasé

IEC 60077-4:2019 est disponible sous forme de IEC 60077-4:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L' IEC 60077-4:2019 donne les règles relatives aux disjoncteurs à courant monophasé dont les contacts principaux sont destinés à être raccordés à des lignes aériennes de contact à courant monophasé. La tension nominale de ces circuits est conforme à l'IEC 60850. En complément de l'IEC 60077-2, le présent document précise particulièrement: a) les caractéristiques des disjoncteurs; b) les conditions de service que les disjoncteurs supportent du point de vue: - du fonctionnement et du comportement en service normal; - du fonctionnement et du comportement en cas de court-circuit; - des propriétés diélectriques; c) les essais de conformité des composants avec les caractéristiques dans les conditions de service ainsi que les méthodes d'essai correspondantes à utiliser; d) les informations à donner ou à marquer sur le disjoncteur. Cette deuxième édition annule et remplace la première édition, parue en 2003. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) les valeurs normalisées des tensions transitoires de rétablissement et la procédure d'essai sont revues; b) modification de la procédure de vérification de l'échauffement; c) ajout de l'essai d'étanchéité comme essai de type et du mesurage de la résistance d'isolement.

Železniške naprave - Električna oprema za vozna sredstva - 4. del: Elektrotehnične komponente - Pravila za močnostna stikala za izmenični tok

General Information

Status
Published
Publication Date
19-Dec-2019
Withdrawal Date
28-Nov-2022
Current Stage
6060 - Document made available - Publishing
Start Date
20-Dec-2019
Completion Date
20-Dec-2019

Relations

Buy Standard

Standard
EN IEC 60077-4:2020
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2020
Nadomešča:
SIST EN 60077-4:2003
Železniške naprave - Električna oprema za vozna sredstva - 4. del: Elektrotehnične
komponente - Pravila za močnostna stikala za izmenični tok
Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical
components - Rules for AC circuit-breakers
Bahnanwendungen - Elektrische Betriebsmittel auf Bahnfahrzeugen - Teil 4:
Elektrotechnische Bauteile - Regeln für AC-Leistungsschalter
Applications ferroviaires - Equipements électriques pour le matériel roulant - Partie 4:
Composants électrotechniques - Règles pour disjoncteurs à courant monophasé
Ta slovenski standard je istoveten z: EN IEC 60077-4:2019
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
29.280 Električna vlečna oprema Electric traction equipment
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60077-4

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2019
ICS 45.060.01 Supersedes EN 60077-4:2003 and all of its amendments
and corrigenda (if any)
English Version
Railway applications - Electric equipment for rolling stock - Part
4: Electrotechnical components - Rules for AC circuit-breakers
(IEC 60077-4:2019)
Applications ferroviaires - Équipements électriques du Bahnanwendungen - Elektrische Betriebsmittel auf
matériel roulant - Partie 4: Composants électrotechniques - Fahrzeugen - Teil 4: Elektrotechnische Bauteile - Regeln für
Règles pour disjoncteurs à courant monophasé AC-Leistungsschalter
(IEC 60077-4:2019) (IEC 60077-4:2019)
This European Standard was approved by CENELEC on 2019-11-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60077-4:2019 E

European foreword
The text of document 9/2538/FDIS, future edition 2 of IEC 60077-4, prepared by IEC/TC 9 "Electrical
equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 60077-4:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-08-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-11-29
document have to be withdrawn
This document supersedes EN 60077-4:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60077-4:2019 was approved by CENELEC as a European
Standard without any modification.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60060-1 2010 High-voltage test techniques - Part 1: EN 60060-1 2010
General definitions and test requirements
IEC 60077-1 2017 Railway applications - Electric equipment EN 60077-1 2017
for rolling stock - Part 1: General service
conditions and general rules
IEC 60077-2 2017 Railway applications - Electric equipment EN 60077-2 2017
for rolling stock - Part 2: Electrotechnical
components - General rules
IEC 60529 -  Degrees of protection provided by - -
enclosures (IP Code)
IEC 61373 -  Railway applications - Rolling stock EN 61373 -
equipment - Shock and vibration tests
IEC 62271-1 2017 High-voltage switchgear and controlgear - EN 62271-1 2017
Part 1: Common specifications for
alternating current switchgear and
controlgear
IEC 62271-100 2008 High-voltage switchgear and controlgear - EN 62271-100 2009
Part 100: Alternating current circuit-
breakers
+ A1 2012  + A1 2012
+ A2 2017  + A2 2017
IEC 62271-102 -  High-voltage switchgear and controlgear -- - -
Part 102: Alternating current disconnectors
and earthing switches
IEC 60077-4 ®
Edition 2.0 2019-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Railway applications – Electric equipment for rolling stock –

Part 4: Electrotechnical components – Rules for AC circuit-breakers

Applications ferroviaires – Équipements électriques du matériel roulant –

Partie 4: Composants électrotechniques – Règles pour disjoncteurs

à courant monophasé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 45.060.01 ISBN 978-2-8322-7508-5

– 2 – IEC 60077-4:2019 © IEC 2019
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
3.1 Components . 7
3.2 Component parts . 8
3.3 Operational features . 9
3.4 Making and breaking characteristics . 10
3.5 Abbreviated terms . 12
4 Classification . 12
5 Characteristics . 13
5.1 Summary of characteristics . 13
5.2 Type of circuit-breaker . 13
5.3 Rated values and limiting values for the main circuit . 13
5.3.1 General . 13
5.3.2 Rated voltages . 13
5.3.3 Rated currents . 13
5.3.4 Rated operational frequency . 14
5.3.5 Rated power factors. 14
5.3.6 Short-circuit characteristics . 14
5.4 Operational frequencies . 16
5.5 Electric and pneumatic control circuits . 16
5.6 Electric and pneumatic auxiliary circuits . 17
5.7 Overcurrent release . 17
5.8 Recovery voltages . 17
6 Product information . 17
6.1 Component documentation . 17
6.2 Marking . 17
7 Normal service conditions . 17
8 Constructional and performance requirements . 17
8.1 Constructional requirements . 17
8.2 Performance requirements . 18
8.2.1 Operating conditions . 18
8.2.2 Temperature limits . 18
8.2.3 Operation following inactivity . 18
8.2.4 Electromagnetic compatibility (EMC) . 18
8.2.5 Acoustic noise emission . 18
8.2.6 Clearances . 18
8.2.7 Creepage distances . 18
8.2.8 Switching overvoltages . 18
8.2.9 Operational performance capability . 18
8.2.10 Ability to withstand vibration and shock . 19
8.2.11 Ability to make and break under short-circuit conditions . 19
9 Tests . 19
9.1 Kind of tests . 19

IEC 60077-4:2019 © IEC 2019 – 3 –
9.1.1 General . 19
9.1.2 Type tests . 20
9.1.3 Routine tests . 20
9.1.4 Investigation tests . 20
9.2 Verification of constructional requirements . 20
9.2.1 General . 20
9.2.2 Type tests . 20
9.2.3 Routine tests . 20
9.3 Type tests for verification of performance requirements . 20
9.3.1 Test sequences . 20
9.3.2 General test conditions . 21
9.3.3 Test sequence I: General performance characteristics . 22
9.3.4 Test sequence II: Rated short-circuit making and breaking capacities . 23
9.3.5 Test sequence III: Ability to withstand vibration and shock .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.