EN 60286-4:2013

Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms

IEC 60286-4:2013 is applicable to stick magazines (including end stoppers) intended to be used for storage of electronic components, for transport from the manufacturer to the customer and for in-house use in the manufacturing plant. They are also used to feed automatic placement machines for surface mounting as well as for through-hole mounting of electronic components. This edition includes the following significant technical changes with respect to the previous edition: Clause 4 describes the guidelines for customer specific stick magazine design. It replaces the magazine design rules for IEC outlined components and rules for orientation of components in stick magazines which have been moved to Annexes A to D.

Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 4: Stangenmagazine für elektronische Bauelemente mit verschiedenen Gehäusen

Emballage des composants pour opérations automatisées – Partie 4: Magasins chargeurs pour composants électroniques encapsulés dans des boîtiers de différentes formes

La CEI 60286-4:2013 est applicable aux magasins chargeurs (y compris aux bouchons d'extrémités) destinés au stockage des composants électroniques pour le transport entre le fabricant et le client, et pour l'utilisation interne dans l'installation de fabrication. Ils sont aussi utilisés pour l'alimentation des machines de placement automatique pour le montage en surface ainsi que pour le montage par trous traversants des composants électroniques. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: L'Article 4 décrit les lignes directrices pour la conception de magasins chargeurs sur mesure. Il remplace les règles de conception des magasins pour les composants décrits par la CEI et les règles d'orientation des composants dans les magasins chargeurs qui ont été déplacées dans les Annexes A à D.

Pakiranje komponent za avtomatsko obdelavo - 4. del: Palične posode za elektronske komponente, inkapsulirane v ohišjih različnih oblik

Ta del standarda IEC 60286 se uporablja za palične posode (vključno s končnimi nastavki), ki so namenjene hranjenju elektronskih komponent, prevozu od proizvajalca do stranke in interni uporabi v proizvodnem obratu. Uporabljajo se tudi za strojno podajanje strojem za strojno polaganje in strojno vstavljanje elektronskih komponent.

General Information

• Status: Published
• Publication Date: 07-Nov-2013
• Withdrawal Date: 29-Aug-2016
• ICS: 31.020 - Electronic components in general
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Nov-2013
• Completion Date: 08-Nov-2013
• Ref Project: SIST EN 60286-4:2014 - Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms

Relations

• Replaces: EN 60286-4:1998 - Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2014
1DGRPHãþD
SIST EN 60286-4:2002
3DNLUDQMHNRPSRQHQW]DDYWRPDWVNRREGHODYRGHO3DOLþQHSRVRGH]D
HOHNWURQVNHNRPSRQHQWHLQNDSVXOLUDQHYRKLãMLKUD]OLþQLKREOLN
Packaging of components for automatic handling - Part 4: Stick magazines for electronic
components encapsulated in packages of different forms
/
Emballage de composants pour opérations automatisées - Partie 4 : Magasins chargeurs
pour composants électroniques encapsulés dans des boîtiers de différentes formes
Ta slovenski standard je istoveten z: EN 60286-4:2013
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
55.160 =DERMLâNDWOH3ODVWLþQL Cases. Boxes. Crates
]DERML
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60286-4
NORME EUROPÉENNE
November 2013
EUROPÄISCHE NORM
ICS 31.020; 31.240 Supersedes EN 60286-4:1998

English version
Packaging of components for automatic handling -
Part 4: Stick magazines for electronic components encapsulated in
packages of different forms
(IEC 60286-4:2013)
Emballage des composants pour Gurtung und Magazinierung von Bauteilen
opérations automatisées – Partie 4: für automatische Verarbeitung -
Magasins chargeurs pour composants Teil 4: Stangenmagazine für elektronische
électroniques encapsulés dans des Bauelemente mit verschiedenen
boîtiers de différentes formes Gehäusen
(CEI 60286-4:2013) (IEC 60286-4:2013)

This European Standard was approved by CENELEC on 2013-08-30. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60286-4:2013 E
Foreword
The text of document 40/2230/FDIS, future edition 3 of IEC 60286-4, prepared by IEC TC 40, "Capacitors
and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60286-4:2013.

The following dates are fixed:
(dop) 2014-05-30
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-08-30
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60286-4:1998.
Clause 4 describes the guidelines for customer specific stick magazine design. It replaces the magazine
design rules for IEC outlined components and rules for orientation of components in stick magazines
which have been moved to Annexes Z to D.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60286-4:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
ISO 11469 NOTE  Harmonized as EN ISO 11469.

- 3 - EN 60286-4:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60191-3 1999 Mechanical standardization of semiconductor EN 60191-3 1999
devices -
Part 3: General rules for the preparation of
outline drawings of integrated circuits

IEC 60747-1 2006 Semiconductor devices - - -
+ corr. August 2008 Part 1: General
+ A1 2010
IEC 60286-4 ®
Edition 3.0 2013-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –

Part 4: Stick magazines for electronic components encapsulated in packages of

different forms
Emballage des composants pour opérations automatisées –

Partie 4: Magasins chargeurs pour composants électroniques encapsulés dans

des boîtiers de différentes formes

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX P
ICS 31.020; 31.240 ISBN 978-2-8322-0947-9

– 2 – 60286-4  IEC:2013
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and conventions . 5
3.1 Terms and definitions . 5
3.2 Conventions . 5
4 Shape and cross-section of stick magazine . 6
5 Dimensions of stick magazines . 7
5.1 General . 7
5.2 Materials . 8
5.3 Recycling . 8
6 Mechanical stability . 8
7 End stoppers and spacers . 9
8 Orientation of the components in the stick magazine . 9
9 Marking . 9
Annex A (informative) DIL packages for through-hole mount . 10
Annex B (informative) SO packages for surface mounting . 12
Annex C (informative) Leaded chip carrier packages (PLCC) for surface mounting . 13
Annex D (normative) Rule for the orientation of integrated circuit packages in handling and
shipping carriers such as stick magazines and rails (from IEC 60191-3:1999, Annex G) . 14
Bibliography . 16

Figure 1 – Shape and cross-sections of stick magazines . 6
Figure 2 – Schematic of stick magazine design and schematic of package profile . 7
Figure A.1 – DIL packages for through-hole mounting . 10
Figure B.1 – SO packages for surface mounting . 12
Figure C.1 – Leaded chip carrier packages (PLCC) for surface mounting . 13
Figure D.1 – Five examples of the terminal No. 1 marking locations . 15

Table 1 – Tolerances to the package profile dimensions . 7
Table 2 – Principle of stick magazine requirements . 8
Table 3 – Material reference for magazines and stoppers . 8
Table A.1 – e = 3 modules e . 10
Table A.2 – e = 4 modules e . 11
Table A.3 – e = 6 modules e . 11
Table B.1 – Stick magazine dimensions for SO packages . 12
Table C.1 – Stick magazine dimensions for PLCC packages . 13

60286-4  IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 4: Stick magazines for electronic components encapsulated
in packages of different forms

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60286-4 has been prepared by IEC technical comm
...