EN 60745-2-12:2003
(Main)Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators
Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators
Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for concrete vibrators. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools.
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-12: Besondere Anforderungen für Innenrüttler
Outils électroportatifs à moteur - Sécurité - Partie 2-12: Règles particulières pour les vibreurs à béton
Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for concrete vibrators. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools.
Ročna električna orodja - Varnost - 2-12. del: Posebne zahteve za vibratorje za beton (IEC 60745-2-12:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60745-2-12:2004
01-maj-2004
1DGRPHãþD
SIST HD 400.3K S1:1995
5RþQDHOHNWULþQDRURGMD9DUQRVWGHO 3RVHEQH]DKWHYH]DYLEUDWRUMH]D
EHWRQ ,(&
Hand-held motor-operated electric tools - Safety -- Part 2-12: Particular requirements for
concrete vibrators
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-12: Besondere
Anforderungen für Innenrüttler
Outils électroportatifs à moteur - Sécurité -- Partie 2-12: Règles particulières pour les
vibreurs à béton
Ta slovenski standard je istoveten z: EN 60745-2-12:2003
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-12:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60745-2-12:2004
---------------------- Page: 2 ----------------------
SIST EN 60745-2-12:2004
EUROPEAN STANDARD EN 60745-2-12
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2003
ICS 25.140.20 Supersedes HD 400.3K S1:1981
English version
Hand-held motor-operated electric tools –
Safety
Part 2-12: Particular requirements for concrete vibrators
(IEC 60745-2-12:2003)
Outils électroportatifs à moteur – Handgeführte motorbetriebene
Sécurité Elektrowerkzeuge –
Partie 2-12: Règles particulières Sicherheit
pour les vibreurs à béton Teil 2-12: Besondere Anforderungen
(CEI 60745-2-12:2003) für Innenrüttler
(IEC 60745-2-12:2003)
This European Standard was approved by CENELEC on 2003-09-23. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-12:2003 E
---------------------- Page: 3 ----------------------
SIST EN 60745-2-12:2004
EN 60745-2-12:2003 - 2 -
Foreword
The text of document 61F/511/FDIS, future edition 2 of IEC 60745-2-12, prepared by SC 61F, Safety
of hand-held motor-operated electric tools, of IEC TC 61, Safety of household and similar electrical
appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60745-2-12 on 2003-09-23.
This European Standard supersedes HD 400.3K S1:1981.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01
Other standards referred to in this European standard are listed in Clause 2. Clause 2 lists the valid
edition of those documents at the time of issue of this EN.
This standard is divided into two parts:
Part 1: General requirements which are common to most hand-held electric motor operated tools (for
the purpose of this standard referred to simply as tools) which could come within the scope of
this standard;
Part 2: Requirements for particular types of tools which either supplement or modify the requirements
given in Part 1 to account for the particular hazards and characteristics of these specific tools.
This European Standard has been prepared under a mandate given to CEN and CENELEC by the
European Commission and the European Free Trade Association and supports the essential health
and safety requirements of the Machinery Directive.
Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with
the essential health and safety requirements of the Directive concerned.
Warning: Other requirements and other EC Directives can be applicable to the products falling
within the scope of this standard.
This standard follows the overall requirements of EN 292-1 and EN 292-2.
This Part 2-12 is to be used in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.