End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables

This European Standard defines outdoor multi-pair/quad cables for use in high bit rate telecommunication networks with their relative definitions and requirements. It covers radially water blocked cables, with an overall screen, with performances up to 60 MHz, to be used in outdoor networks intended to connect the broadband outside plant to the individual customer premises with a maximum recommended length of connection of 1 km. The electrical, environmental, mechanical and transmission performance characteristics of the cables, related to their reference test methods, are detailed.

Vielpaarige Kabel für Endanwender für Telekommunikationsnetzwerke mit hoher Bitrate - Teil 1: Luftkabel

Câbles multi-paires de l'utilisateur final utilisés dans les réseaux de télécommunication à haut-débits - Partie 1: Câbles aériens

Večparni kabli do končnega uporabnika, uporabljeni v telekomunikacijskih omrežjih z visokimi bitnimi hitrostmi prenosa - 1. del: Nadzemni kabli

General Information

Status
Published
Publication Date
29-Jun-2004
Withdrawal Date
31-Jan-2007
Drafting Committee
Parallel Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
11-Mar-2020

Buy Standard

Standard
EN 50406-1:2004
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 50406-1:2004

STANDARD
oct 2004
Večparni kabli do končnega uporabnika, uporabljeni v telekomunikacijskih
omrežjih z visokimi bitnimi hitrostmi prenosa - 1. del: Nadzemni kabli
End user multi-pair cables used in high bit rate telecommunication networks – Part
1: Aerial cables
ICS 33.120.10 Referenčna številka
SIST EN 50406-1:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 50406-1
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2004


ICS 33.120.10


English version


End user multi-pair cables used in
high bit rate telecommunication networks
Part 1: Aerial cables


Câbles multi-paires de l'utilisateur final Vielpaarige Kabel für Endanwender
utilisés dans les réseaux für Telekommunikationsnetzwerke
de télécommunication à haut-débits mit hoher Bitrate
Partie 1: Câbles aériens Teil 1: Luftkabel






This European Standard was approved by CENELEC on 2004-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50406-1:2004 E

---------------------- Page: 2 ----------------------

EN 50406-1:2004 - 2 -
Foreword

This European Standard was prepared by the Technical Committee CENELEC TC 46X,
Communication cables.

The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as EN 50406-1 on 2004-02-01.

The following dates were fixed:

- latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2005-02-01

- latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2007-02-01

_______________

---------------------- Page: 3 ----------------------

– 3 – EN 50406-1:2004
Contents
1 Scope .5
2 Normative references .5
3 Terminology and abbreviations .5
3.1 Terminology .5
3.2 Abbreviations .5
4 General information.6
4.1 General cable description .6
4.2 Environment and product safety requirement.6
4.3 Testing .6
5 Requirements for conductor.6
5.1 Construction and dimensions.6
5.2 Mechanical requirements.6
5.3 Electrical requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.