EN IEC 62841-4-8:2025/A11:2025
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-8: Particular requirements for shredders/chippers
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-8: Particular requirements for shredders/chippers
2022-08-22: This prAA covers common mods to EN IEC 62841-4-8 (PR=75587)
D164/C043: DOW = DOR + 48 months
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 4-8: Besondere Anforderungen für Schredder/Häcksler
Outils électroportatifs à moteur, outils portables et machines pour jardin et pelouses - Sécurité - Partie 4-8: Exigences particulières pour les déchiqueteuses/machines à déchiqueter
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-8. del: Posebne zahteve za drobilnike - Dopolnilo A11
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2025
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-
8. del: Posebne zahteve za drobilnike - Dopolnilo A11
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 4-8: Particular requirements for shredders/chippers
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 4-8: Besondere Anforderungen für
Schredder/Häcksler
Outils électroportatifs à moteur, outils portables et machines pour jardin et pelouses -
Sécurité - Partie 4-8: Exigences particulières pour les déchiqueteuses/machines à
déchiqueter
Ta slovenski standard je istoveten z: EN IEC 62841-4-8:2025/A11:2025
ICS:
25.140.20 Električna orodja Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62841-4-8:2025/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2025
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 4-8: Particular
requirements for shredders/chippers
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardin et pelouses - Sécurité - Partie 4-8: Exigences transportable Werkzeuge und Rasen- und
particulières pour les déchiqueteuses/machines à Gartenmaschinen - Sicherheit - Teil 4-8: Besondere
déchiqueter Anforderungen für Schredder/Häcksler
This amendment A11 modifies the European Standard EN IEC 62841-4-8:2025; it was approved by CENELEC on 2025-01-13. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62841-4-8:2025/A11:2025 E
Contents Page
European foreword . 3
1 Modifications to Clause 8 “Marking and instructions” . 5
2 Modification to Clause 18 “Abnormal operation” . 5
3 Modification to Clause 21 “Construction” . 6
4 Modification to Clause 24 “Supply connection and external flexible cords” . 6
5 Modifications to Annex I “Measurement of noise and vibration emissions” . 6
6 Modifications to Annex K, “Battery tools and battery packs” . 6
7 Addition of Annex ZA “Normative references to international publications with their
corresponding European publications” . 7
8 Addition of Annex ZZ, “Relationship between this European Standard and the
essential requirements of Directive 2006/42/EC aimed to be covered” . 9
European foreword
This document (EN IEC 62841-4-8:2025/A11:2025) has been prepared by CLC/TC 116 “Safety and
environmental aspects of motor-operated electric tools”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2026-04-30
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2029-04-30
conflicting with this document have to be
withdrawn
This series is divided into four parts.
Part 1: General requirements which are common to most hand-held electric motor operated tools (for the
purpose of this document referred to simply as tools) which could come within the scope of this document;
Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements
given in Part 1 to account for the particular hazards and characteristics of these specific tools.
Part 4-8 is used in conjunction with EN 62841-1:2015 and all of its amendments and corrigenda (if any).
Part 4-8 supplements or modifies the corresponding clauses in EN 62841-1:2015 and all of its amendments
and corrigenda (if any), so as to convert it into the European Standard: Particular requirements for
shredders/chippers.
Where a particular subclause of Part 1 is not mentioned in the Part 4-8, that subclause applies as far as
relevant. When this document states “addition”, “modification” or “replacement”, the relevant text in Part 1
is to be adapted accordingly.
The following print types are used:
— requirements; in roman type;
— test specifications: in italic type;
— notes: in smaller roman type.
The terms defined in Clause 3 are printed in bold typeface.
Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting
from 101.
Clauses, subclauses, notes, tables, figures and annexes which are additional to those in
IEC 62841-4-8:2025 are prefixed “Z”.
This document follows the overall requirements of EN ISO 12100:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
For the relationship with EU Legislation, see informative Annex ZZ, which is an integral part of this
document.
Compliance with the clauses of Part 1 together with Part 4-8 provides one means of conforming with the
essential health and safety requirements of the EU Legislation concerned.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
1 Modifications to Clause 8 “Marking and instructions”
Replace the existing subclause 8.3 with the following:
“8.3 Addition:
The shredding means, where replaceable during user maintenance, shall be marked to identify the part
number(s) and the manufacturer, importer or supplier. This marking is not required to be clearly discernible
from the outside of the machine.
Replacement of the sixth list item:
— the mass of the machine in kg. For this requirement, the mass of the machine shall be the mass
specified in 8.14.3.”
Replace the existing item 110) of subclause 8.14.2 b) with the following:
“110) Instruction for the operator to wear protective gloves while feeding material into the machine as well
as an explanation of the relevant protection category;”
Replace the text and Note below 8.14.2 c) 107) with the following:
“8.14.2 Za) Replacement:
Emissions:
1) The noise emission, measured in accordance with Clause I.2, as follows:
— A-weighted emission sound pressure level L and its uncertainty K , where L exceeds 70
pA pA pA
dB(A).
Where L does not exceed 70 dB(A), this fact shall be indicated;
pA
— A-weighted guaranteed sound power level L .
WA
2) Recommendation for the operator to wear hearing protection.
3) The following information:
— that the declared noise emission value(s) have been measured in accordance with a standard test
method and may be used for comparing one machine with another;
— that the declared noise emission value(s) may also be used in a preliminary assessment of
exposure.
4) A warning:
— that the noise emissions during actual use of the machine can differ from the declared values
depending on the ways in which the machine is used especially what kind of workpiece is
processed; and
— of the need to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as
the times when the machine is switched off and when it is running idle in addition to the operating
time).”
2 Modification to Clause 18 “Abnormal operation”
In subclause 18.8.1, replace the last row of Table 4 with the following:
----------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.