EN 60695-5-1:2003

Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance

Provides guidance on the following: a) general aspects of corrosion damage test methods; b) methods of measurement of corrosion damage; c) consideration of test methods; d) relevance of corrosion damage data to hazard assessment. The structure of this second edition remains essentially the same as the first edition with the following additions: - Information on fire scenarios and fire models has been added along with an update on the latest advances in the analysis of the fire effluent. - The general classification of fires from ISO TR 9122-1 has been added. - A new clause on the general aspects of the corrosivity of fire effluent which describes the types of corrosion damage effects and the factors affecting corrosivity. - A new clause on the principles of corrosion damage measurement has been added describing the assessment of the corrosive potential and the consideration of the corrosivity test methods. - A new table describing a summary of corrosion test methods. - A new flowchart detailing the evaluation and consideration of corrosion damage test methods. - The bibliography has been expanded. Has the status of a basic safety publication in accordance with IEC guide 104.

Prüfungen zur Beurteilung der Brandgefahr - Teil 5-1: Korrosionsschädigung durch Rauch und/oder Brandgase - Allgemeiner Leitfaden

Essais relatifs aux risques du feu - Partie 5-1: Effets des dommages de corrosion des effluents du feu - Guide général

Fournit un guide concernant: a) les aspects généraux des méthodes d'essai des dommages provoqués par la corrosion; b) les méthodes de mesure des dommages provoqués par la corrosion; c) la prise en compte des méthodes d'essai; d) la pertinence des données concernant les dommages de corrosion pour l'évaluation des risques. La structure de la deuxième édition demeure pratiquement inchangée, à l'exception des éléments importants suivants qui ont été ajoutés: - Information relative aux scénarios et aux modèles de feu ainsi qu'une mise à jour des dernières avancées réalisées dans l'analyse des effluents du feu. - Classification générale des feux selon l'ISO TR 9122-1. - Nouvel article relatif aux aspects généraux de la corrosivité des effluents du feu, décrivant les types d'effets des dommages de la corrosion et les facteurs affectant la corrosivité. - Nouvel article relatif aux principes de mesure des dommages de la corrosion, décrivant l'évolution du potentiel corrosif et la prise en compte des méthodes d'essai de la corrosivité. - Nouveau tableau résumant les méthodes d'essai de la corrosivité. - Nouvel organigramme présentant en détail l'évaluation et la prise en compte des méthodes d'essai des dommages de la corrosion. - Elargissement de la bibliographie. A le statut d'une publication fondamentale de sécurité conformément au Guide 104 de la CEI.

Preskušanje požarne ogroženosti - 5-1. del: Poškodbe zaradi korozijskega učinka izžarevanja ognja - Splošno navodilo

General Information

• Status: Published
• Publication Date: 13-Feb-2003
• Withdrawal Date: 31-Jan-2006
• ICS: 29.020 - Electrical engineering in general
• Technical Committee: CLC/SR 89 - Fire hazard testing
• Drafting Committee: IEC/TC 89 - IEC_TC_89
• Parallel Committee: IEC/TC 89 - IEC_TC_89
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 14-Feb-2003
• Completion Date: 14-Feb-2003
• Ref Project: SIST EN 60695-5-1:2003 - Fire hazard testing -- Part 5-1: Corrosion damage effects of fire effluent - General guidance

Relations

• Replaces: EN 60695-5-1:1993 - Fire hazard testing - Part 5: Assessment of potential corrosion damage by fire effluent - Section 1: General guidance
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 60695-5-1:2021 - Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2003
1DGRPHãþD
SIST EN 60695-5-1:2001
3UHVNXãDQMHSRåDUQHRJURåHQRVWLGHO3RãNRGEH]DUDGLNRUR]LMVNHJDXþLQND
L]åDUHYDQMDRJQMD6SORãQRQDYRGLOR
Fire hazard testing -- Part 5-1: Corrosion damage effects of fire effluent - General
guidance
Prüfungen zur Beurteilung der Brandgefahr -- Teil 5-1: Korrosionsschädigung durch
Rauch und/oder Brandgase - Allgemeiner Leitfaden
Essais relatifs aux risques du feu -- Partie 5-1: Effets des dommages de corrosion des
effluents du feu - Guide général
Ta slovenski standard je istoveten z: EN 60695-5-1:2003
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60695-5-1
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2003

ICS 29.020 Supersedes EN 60695-5-1:1993

English version
Fire hazard testing
Part 5-1: Corrosion damage effects of fire effluent -
General guidance
(IEC 60695-5-1:2002)
Essais relatifs aux risques du feu Prüfungen zur Beurteilung
Partie 5-1: Effets des dommages der Brandgefahr
de corrosion des effluents du feu - Teil 5-1: Korrosionsschädigung
Guide général durch Rauch und/oder Brandgase -
(CEI 60695-5-1:2002) Allgemeiner Leitfaden
(IEC 60695-5-1:2002)
This European Standard was approved by CENELEC on 2003-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60695-5-1:2003 E
Foreword
The text of document 89/556/FDIS, future edition 2 of IEC 60695-5-1, prepared by IEC TC 89, Fire
hazard testing, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60695-5-1 on 2003-02-01.
This European Standard supersedes EN 60695-5-1:1993

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-11-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-02-01

This European Standard should be read in conjunction with IEC 60695-5-2 and IEC 60695-5-3.

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60695-5-1:2002 was approved by CENELEC as a
European Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:

ISO 7384 NOTE Harmonized as EN ISO 7384:1995 (not modified).
__________
- 3 - EN 60695-5-1:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60695-1-1 1999 Fire hazard testing EN 60695-1-1 2000
+ corr. January 2000 Part 1-1: Guidance for assessing the
fire hazard of electrotechnical products -
General guidelines
IEC/TS 60695-5-2 2002 Part 5-2: Corrosion damage effects of - -
fire effluent - Summary and relevance of
test methods
1)
IEC/TS 60695-5-3 - Part 5-3: Corrosion damage effects of - -
fire effluent - Leakage current and metal
loss test method
2)
IEC 60754-1 1994 Test on gases evolved during - -
combustion of materials from cables
Part 1: Determination of the amount of
halogen acid gas
3)
IEC 60754-2 1991 Test on gases evolved during HD 602 S1 1992
(mod) combustion of materials from cables -
Determination of degree of acidity
(corrosivity) of gases by measuring pH
and conductivity
A1 1997 - -
ISO/TR 9122-1 1989 Toxicity testing of fire effluents - -
Part 1: General
ISO 11907-2 1995 Plastics - Smoke generation - - -
Determination of the corrosivity of fire
effluents
Part 2: Static method
1)
To be published.
2)
EN 50267-1:1998 and EN 50265-2-1:1998, which are related to IEC 60754-1:1994, apply.
3)
HD 602 S1 is superseded by EN 50267-1:1998 and EN 50267-2-3:1998.

Publication Year Title EN/HD Year
ISO 11907-3 1998 Part 3: Dynamic decomposition method - -
using a travelling furnace
ISO 11907-4 1998 Part 4: Dynamic decomposition method - -
using a conical radiant heater

ISO/IEC 13943 2000 Fire safety - Vocabulary EN ISO 13943 2000

ASTM D 2671-00 - Standard Test Methods for Heat- - -
Shrinkable Tubing for Electrical Use

NORME CEI
INTERNATIONALE IEC
60695-5-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2002-11
PUBLICATION FONDAMENTALE DE SÉCURITÉ
BASIC SAFETY PUBLICATION
Essais relatifs aux risques du feu –
Partie 5-1:
Effets des dommages de corrosion
des effluents du feu – Guide général
Fire hazard testing –
Part 5-1:
Corrosion damage effects of fire effluent –
General guidance
 IEC 2002 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photo-copie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
Q
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60695-5-1  IEC:2002 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .9
1 Scope .11
2 Normative references.11
3 Definitions .13
4 Fire scenarios and fire models .15
5 General aspects of the corrosivity of fire effluent .17
5.1 Corrosion damage scenarios .17
5.2 Types of corrosion damage effects .19
5.2.1 Metal loss .19
5.2.2 Moving parts becoming immobile .19
5.2.3 Bridging of conductor circuits.19
5.2.4 Formation of a non-conducting layer on contact surfaces.19
5.3 Factors affecting corrosivity.21
5.3.1 The nature of fire effluent.21
5.3.2 The corrosion environment.23
6 Principles of corrosion damage measurement.23
6.1 Introduction .23
6.2 Generation of the fire effluent .25
6.2.1 Selection of the test specimen which is to be burned .25
6.2.2 Selection of the fire model .25
6.3 The assessment of corrosive potential .25
6.3.1 General.25
6.3.2 Indirect assessment .25
6.3.3 Simulated product testing .27
6.3.4 Product testing.27
6.4 Consideration of corrosivity test methods.29
7 Relevance of data to hazard assessment.33
Bibliography.35
Figure 1 – Different stages in the development of a fire within a compartment.17
Figure 2 – Evaluation and consideration of corrosion damage test methods .31
Table 1 – General classification of fires (ISO/TR 9122-1) .17
Table 2 – Summary of corrosivity test methods .27

60695-5-1  IEC:2002 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIRE HAZARD TESTING –
Part 5-1: Corrosion damage effects of fire effluent –
General guidance
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60695-5-1 has been prepared by IEC technical committee 89: Fire
hazard testing.
This second edition cancels and replaces the first edition, published in 1993, and constitutes
a technical revis
...