Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods

IEC 60695-7-2:2021 gives a brief summary of the test methods that are in common use in the assessment of the toxicity of fire effluent. It includes special observations on their relevance to real fire scenarios and gives recommendations on their use. It advises which tests provide toxic potency data that are relevant to real fire scenarios, and which are suitable for use in fire hazard assessment and fire safety engineering. The list of test methods is not to be considered exhaustive. This summary cannot be used in place of published standards which are the only valid reference documents. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. The main changes with respect to the previous edition are listed below: – New text in the introduction; – New text in the scope; – Clause 2 has been updated; – Many terms and definitions in Clause 3 reproduced from ISO 13943 have been deleted. Other terms and definitions have been added. – New text in Subclauses 4.3 and 4.4; – New text in Subclause 6.1; – References to IEC 60695-7-50 and -51 (now withdrawn) have been removed; – Reference to DEF STAN 07-247 has been added; – Details of ISO/TS 19021 have been added; – Details of EN 17084 have been added; – New text added concerning ISO/TS 19700; – New text added concerning the IMO FTP toxicity test; – New Subclause 7.1 has been added; – The Annex in Edition1 has been replaced by new Clause 8; – The bibliography has been updated.

Prüfungen zur Beurteilung der Brandgefahr - Teil 7-2: Toxizität von Rauch und/oder Brandgasen - Auswertung und Sachdienlichkeit von Prüfverfahren

Essais relatifs aux risques du feu - Partie 7-2: Toxicité des effluents du feu - Résumé et pertinence des méthodes d'essai

IEC 60695-7-2:2021 fournit un bref résumé des méthodes d'essai qui sont d'un usage courant dans l'évaluation de la toxicité des effluents du feu. Elle comprend des observations particulières sur leur pertinence par rapport aux scénarios d'incendies réels, et donne des recommandations sur leur utilisation. Elle indique quels sont les essais fournissant des données de potentiel toxique pertinentes pour les scénarios d'incendies réels, et quels sont ceux qui sont adaptés à l'utilisation dans l'évaluation des dangers d’incendie et l'ingénierie de sécurité incendie. La liste des méthodes d’essai ne doit pas être considérée comme exhaustive. Ce résumé ne peut pas remplacer les normes publiées, qui sont les seuls documents de référence valables. Cette publication fondamentale de sécurité est destinée à être utilisée par les comités d’études pour l’établissement de leurs normes, conformément aux principes exposés dans le Guide 104 de l’IEC et dans le Guide ISO/IEC 51. L'une des responsabilités d'un comité d'études consiste, le cas échéant, à utiliser les publications fondamentales de sécurité dans le cadre de l'élaboration de ses publications. Les exigences, les méthodes ou les conditions d'essai de la présente publication fondamentale de sécurité s'appliquent seulement si elles servent spécifiquement de référence ou sont intégrées dans les publications correspondantes. Cette deuxième édition annule et remplace la première édition parue en 2011. Cette édition constitue une révision technique. Les principales modifications par rapport à l'édition antérieure sont énumérées ci-dessous: – Nouveau texte d'introduction; – Nouveau texte de domaine d’application; – L’Article 2 a été mis à jour; – De nombreux termes et définitions de l’Article 3 issus de l’ISO 13943 ont été supprimés. D’autres termes et définitions ont été ajoutés. – Nouveau texte en 4.3 et 4.4; – Nouveau texte en 6.1; – Les références à l’IEC 60695-7-50 et -51 (à présent supprimées) ont été retirées; – Une référence à la DEF STAN 07-247 a été ajoutée; – Des éléments détaillés tirés de l’ISO/TS 19021 ont été ajoutés; – Des éléments détaillés tirés de l’EN 17084 ont été ajoutés; – Nouveau texte ajouté relatif à l’ISO/TS 19700; – Nouveau texte relatif à l'essai de toxicité de l’OMI FTP; – Nouveau paragraphe 7.1; – L’Annexe de la première édition est devenue le nouvel Article 8; – La bibliographie a été mise à jour.

Preskušanje požarne ogroženosti - 7-2. del: Toksičnost dimnih plinov - Povzetek in relevantnost preskusnih metod (IEC 60695-7-2:2021)

V tem delu standarda IEC 60695-7 je kratek pregled preskusnih metod, ki se pogosto uporabljajo pri ocenjevanju toksičnosti dimnih plinov. Vključuje posebna opažanja glede njihove relevantnosti za dejanske požarne scenarije in podaja priporočila glede njihove uporabe. Opisuje, kateri preskusi zagotavljajo podatke o potenci toksičnosti, ki so relevantni za dejanske požarne scenarije ter so primerni za uporabo pri ocenjevanju nevarnosti požara in v inženiringu požarne varnosti. Seznam preskusnih metod ni popoln. Ta pregled se ne sme uporabljati namesto objavljenih standardov, ki so edini veljavni referenčni dokumenti. Ta osnovna varnostna publikacija je namenjena tehničnim odborom za pripravo standardov v skladu z načeli vodil IEC 104 in ISO/IEC 51. Ena od dolžnosti tehničnega odbora je, da med pripravo publikacij uporablja osnovne varnostne publikacije, kadar je to primerno. Zahteve, preskusne metode ali preskusni pogoji iz te osnovne varnostne publikacije se ne uporabljajo, razen če so izrecno navedeni ali zajeti v ustreznih publikacijah.

General Information

Status
Published
Publication Date
02-Dec-2021
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
03-Dec-2021
Completion Date
03-Dec-2021

Relations

Buy Standard

Standard
EN IEC 60695-7-2:2022
English language
47 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60695-7-2:2022
01-februar-2022
Nadomešča:
SIST EN 60695-7-2:2012
Preskušanje požarne ogroženosti - 7-2. del: Toksičnost dimnih plinov - Povzetek in
relevantnost preskusnih metod (IEC 60695-7-2:2021)
Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test
methods (IEC 60695-7-2:2021)
Prüfungen zur Beurteilung der Brandgefahr - Teil 7-2: Toxizität von Rauch und/oder
Brandgasen - Auswertung und Sachdienlichkeit von Prüfverfahren (IEC 60695-7-2:2021)
Essais relatifs aux risques du feu - Partie 7-2: Toxicité des effluents du feu - Résumé et
pertinence des méthodes d'essai (IEC 60695-7-2:2021)
Ta slovenski standard je istoveten z: EN IEC 60695-7-2:2021
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN IEC 60695-7-2:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60695-7-2:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 60695-7-2:2022


EUROPEAN STANDARD EN IEC 60695-7-2

NORME EUROPÉENNE

EUROPÄISCHE NORM December 2021
ICS 13.220.40; 29.020 Supersedes EN 60695-7-2:2011 and all of its
amendments and corrigenda (if any)
English Version
Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary
and relevance of test methods
(IEC 60695-7-2:2021)
Essais relatifs aux risques du feu - Partie 7-2: Toxicité des Prüfungen zur Beurteilung der Brandgefahr - Teil 7-2:
effluents du feu - Résumé et pertinence des méthodes Toxizität von Rauch und/oder Brandgasen - Auswertung
d'essai und Sachdienlichkeit von Prüfverfahren
(IEC 60695-7-2:2021) (IEC 60695-7-2:2021)
This European Standard was approved by CENELEC on 2021-12-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60695-7-2:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60695-7-2:2022
EN IEC 60695-7-2:2021 (E)
European foreword
The text of document 89/1489/CDV, future edition 2 of IEC 60695-7-2, prepared by IEC/TC 89 “Fire
hazard testing” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60695-7-2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–09–02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–12–02
document have to be withdrawn
This document supersedes EN 60695-7-2:2011 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60695-7-2:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60695-1-11 NOTE Harmonized as EN 60695-1-11
IEC 60695-1-12 NOTE Harmonized as EN IEC 60695-1-12
IEC 60695-4 NOTE Harmonized as EN IEC 60
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.