iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60404-6:2018/COR1:2018

(Corrigendum)

Corrigendum 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

Corrigendum 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

Corrigendum 1 - Matériaux magnétiques - Partie 6: Méthodes de mesure des propriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore

General Information

Status
Published
Publication Date
28-Nov-2018
ICS
17.220.20 - Measurement of electrical and magnetic quantities
29.030 - Magnetic materials
Technical Committee
TC 68 - Magnetic alloys and steels
Drafting Committee
WG 2 - TC 68/WG 2
Current Stage
PPUB - Publication issued
Start Date
22-Jan-2019
Completion Date
29-Nov-2018
Ref Project

Relations

Corrects
IEC 60404-6:2018 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
Effective Date
05-Sep-2023

Buy Standard

IEC 60404-6:2018/COR1:2018 - Corrigendum 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens Released:11/29/2018IEC 60404-6:2018/COR1:2018 - Corrigendum 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens Released:11/29/2018
PreviousNext
Standard
IEC 60404-6:2018/COR1:2018 - Corrigendum 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens Released:11/29/2018
English and French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 60404-6 IEC 60404-6
Edition 3.0  2018-05 Édition 3.0  2018-05

MAGNETIC MATERIALS – MATÉRIAUX MAGNÉTIQUES –

Part 6: Methods of measurement of the magnetic
Partie 6: Méthodes de mesure des propriétés
properties of magnetically soft metallic and
magnétiques des matériaux
powder materials at frequencies in the range of
métalliques et des matériaux en poudre
20 Hz to 100 kHz by the use of ring specimens
magnétiquement doux, aux
fréquences comprises entre 20 Hz et 100 kHz,
sur des éprouvettes
en forme de tore
CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections portant sur la version française figurent après le texte anglais.

Replace Formula (B.4) with the following new formula
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60404-8-3:2023(Main)
Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the semi-processed state

IEC 60404-8-3:2023 defines the grades of cold-rolled non-oriented electrical steel strip and sheet delivered in the semi-processed state in nominal thicknesses of 0,47 mm, 0,50 mm, 0,64 mm, 0,65 mm and 0,79 mm. It gives general requirements, magnetic properties, geometric characteristics, tolerances and technical characteristics as well as inspection procedures. The nominal thicknesses of 0,47 mm, 0,64 mm and 0,79 mm apply to the grades for use at 60 Hz only.
This document applies to cold-rolled non-oriented electrical steel strip and sheet delivered in the semi-processed state, i.e. without final heat treatment, in coils or sheets, and intended for the construction of magnetic circuits. This document does not apply to materials supplied in the fully-processed state.
These materials correspond respectively to classes B2 and C21 of IEC 60404-1.
This edition includes the following significant technical changes with respect to the previous edition:
a) Modification of terms and technical requirements concerning geometrical characteristics to be consistent with IEC 60404-9:2018;
b) Insertion of Table 3 – Tolerances on nominal thickness;
c) Change of the length of the test specimen for determination of geometrical characteristics from 2 m to 1 m;
d) Deletion of Annex A with the European numerical system of designation of steels.

  • Standard
    45 pages
    English and French language
    sale 15% off
IEC
IEC 60404-8-1:2023(Main)
Magnetic materials - Part 8-1: Specifications for individual materials - Permanent magnet (magnetically hard) materials

IEC 60404-8-1:2023 specifies minimum values for the principal magnetic properties of, and dimensional tolerances for, technically important permanent magnet (magnetically hard) materials.
For information purposes only, this document provides values for the densities of the materials and the ranges of their chemical compositions.
This fourth edition includes the following significant technical changes with respect to the previous edition:
a) recently developed anisotropic REFeB hot deformed magnets and anisotropic HDDR REFeB bonded magnets are included;
b) high energy Ca-La-Co ferrites stabilized by La and Co substitution are included;
c) new and high-performance grades of REFeB and RE2Co17 sintered magnets and isotropic REFeN bonded magnets are added.

  • Standard
    95 pages
    English and French language
    sale 15% off
IEC
IEC 60404-3:2022(Main)
Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester

IEC 60404-3:2022 is available as IEC 60404-3:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60404-3:2022 is applicable to grain-oriented and non-oriented electrical steel strip and sheet for measurement of AC magnetic properties at power frequencies. The object of this document is to define the general principles and the technical details of the measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (SST). This edition includes the following significant technical changes with respect to the previous edition:
- Annex A was revised. The method of determining the yokes’ lamination resistance was added to Annex A;
- Annex B of the consolidated version of 2010 referred to calibration of the SST using the Epstein method. It was cancelled;
- Annex B (new), Annex C and Annex D were revised, they are for information only;
- Annex C was modified taking account of the new situation regarding P and R grades;
- Annex D was amended by addition of Clause D.4 on the numerical air flux compensation.

  • Standard
    100 pages
    English language
    sale 15% off
  • Standard
    64 pages
    English and French language
    sale 15% off
IEC
IEC 60404-8-4:2022(Main)
Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state

IEC 60404-8-4:2022 is available as IEC 60404-8-4:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60404-8-4:2022 defines the grades of cold-rolled non-oriented electrical steel strip and sheet in nominal thicknesses of 0,35 mm, 0,47 mm, 0,50 mm, 0,65 mm and 1,00 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics, tolerances and technological characteristics, as well as inspection procedure. The nominal thickness 0,47 mm applies to the grades for use at 60 Hz only. This document applies to cold-rolled non-oriented electrical steel strip and sheet supplied in the fully-processed state, i.e. the final annealed condition, in coils or sheets, and intended for the construction of magnetic circuits. This document does not apply to materials supplied in the semi-processed state. This edition includes the following significant technical changes with respect to the previous edition:
- modification of terms and technical requirements concerning geometrical characteristics to be consistent with IEC 60404-9:2018;
- insertion of Table 3 - Tolerances on nominal thickness;
- change of the length of test specimen for determination of geometrical characteristics from 2 m to 1 m.

  • Standard
    80 pages
    English language
    sale 15% off
  • Standard
    52 pages
    English and French language
    sale 15% off
IEC
IEC 60404-17:2021(Main)
Magnetic materials - Part 17: Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor

IEC 60404-17:2021 is applicable to grain-oriented electrical steel strip and sheet specified in IEC 60404-8-7 for the measurement of magnetostriction characteristics under an applied AC magnetic field at 50 Hz or 60 Hz.
This document defines the general principles and technical details of the measurement of magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor.
This document is applicable to the measurement of:
the butterfly loop;
the peak-to-peak value λp-p;
the zero-to-peak value λ0-p.  The magnetostriction characteristics are determined for a sinusoidal induced secondary voltage, for a specified peak value of the magnetic polarization and at a specified magnetizing frequency.

  • Standard
    93 pages
    English and French language
    sale 15% off
IEC
IEC 60404-6:2018/AMD1:2021(Amendment)
Amendment 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • Standard
    5 pages
    English and French language
    sale 15% off
IEC
IEC TR 63304:2021(Main)
Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet

IEC TR 63304:2021(E) describes the general principle and technical details of the methods of measurement of the DC magnetic properties of permanent magnet materials in an open magnetic circuit using a superconducting magnet (SCM).
This method is applicable to permanent magnet materials, such as those specified in IEC 60404-8-1, the properties of which are presumed homogeneous throughout their volume.
There are two methods:
– the SCM-Vibrating Sample Magnetometer (VSM) method;
– the SCM-Extraction method.
This document also describes methods to correct the influence of the self-demagnetizing field in the test specimen on the demagnetization curve measured in an open magnetic circuit. The magnetic properties are determined from the corrected demagnetization curve.
NOTE These SCM-methods can determine the magnetic properties of permanent magnet materials with coercivity higher than 2 MA/m. The methods of measurement in a closed magnetic circuit specified in IEC 60404-5 can lead to significant measurement error due to saturation effects in the pole pieces of yoke for the magnetic materials with coercivity higher than 1,6 MA/m (see IEC 60404-5).

  • Technical report
    46 pages
    English language
    sale 15% off
IEC
IEC 60404-8-5:2020(Main)
Magnetic materials - Part 8-5: Specifications for individual materials - Electrical steel strip and sheet with specified mechanical properties and magnetic polarization

IEC 60404-8-5:2020(E) defines the grades of electrical steel strip and sheet with specified mechanical properties and magnetic polarization. In particular, it gives general requirements, mechanical properties, magnetic polarization, geometric characteristics, tolerances and technological characteristics, as well as inspection procedures.
This document applies to electrical steel strip and sheet intended for the construction of poles and rims of rotating electrical machines.
The grades are grouped into two classes according to their manufacturing process:
- hot-rolled grades;
- cold-rolled grades.
They correspond to Class D21 of IEC 60404-1.
This edition includes the following significant technical changes with respect to the previous edition:
a) extension of the range of products to include the improved grades;
b) division of "flatness" into "edge wave (wave factor)" and "residual curvature" in consistent with IEC 60404-9;
c) change length of test specimen for determinations of geometrical characters from 2 m to 1 m.

  • Standard
    19 pages
    English language
    sale 15% off
IEC
IEC 60404-7:2019(Main)
Magnetic materials - Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open magnetic circuit

IEC 60404-7:2019 specifies a method of measurement of the coercivity of magnetic materials in an open magnetic circuit. This document is applicable to all magnetic materials with coercivities from 0,2 A/m to 160 kA/m.
This edition includes the following significant technical changes with respect to the previous edition:  
Clause 1: The scope includes a more detailed description of the magnetic materials which applies to this standard;
Clause 4: Figure 2 – circuit diagram for methods A and B was simplified and the fluxgate probes inside the solenoid have been added;
Clause 7: Compensation for the earth’s magnetic field and for static and dynamic magnetic noise fields has been added;
Clause 8: Magnetic shielding of the measuring region has been added;
9.2.2: The measuring methods for local and integral measurement of the flux in the test specimen have been separated and the limitations in size and shape of the test specimen have been considered.
9:3: The method C with a VSM (Vibrating Sample Magnetometer) has been moved from 9.3 to the Annex B.
The term "complex shaped test specimen" has been replaced in several clauses by "test specimen different from ellipsoids".
The character of Annex A has been changed from “informative” to “normative”.

  • Standard
    34 pages
    English and French language
    sale 15% off
IEC
IEC 60404-16:2018/COR1:2018(Corrigendum)
Corrigendum 1 - Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
  • Standard
    1 page
    English and French language
    sale 15% off