IEC 60730-2-14:1995
(Main)Automatic electrical controls for household and similar use - Part 2: Particular requirements for electric actuators
Automatic electrical controls for household and similar use - Part 2: Particular requirements for electric actuators
Applies to electric actuators for use in, on, or in association with equipment for household and similar use for heating, air-conditioning and ventilation. The equipment may use electricity, gas, oil solid fuel, solar thermal energy, etc., or a combination thereof.
Dispositifs de commande électrique automatiques à usage domestique et analogue - Partie 2: Règles particulières pour les actionneurs électriques
S'applique aux actionneurs électriques utilisés dans, ou en association avec, les matériels pour usage domestique et analogue pour le chauffage, le conditionnement d'air et la ventilation. Le matériel peut utiliser l'électricité, le gaz, le fioul, les combustibles solides, l'énergie solaire, etc. ou une de leurs combinaisons.
General Information
Relations
Buy Standard
Standards Content (Sample)
NORME CEI
INTERNATIONALE IEC
60730-2-14
INTERNATIONAL
Edition 1.1
STANDARD
2001-08
Edition 1:1995 consolidée par l'amendement 1:2001
Edition 1:1995 consolidated with amendment 1:2001
Dispositifs de commande électrique automatiques
à usage domestique et analogue –
Partie 2-14:
Règles particulières pour les actionneurs
électriques
Automatic electrical controls for household
and similar use –
Part 2-14:
Particular requirements for electric actuators
Numéro de référence
Reference number
CEI/IEC 60730-2-14:1995+A1:2001
Numérotation des publications Publication numbering
Depuis le 1er janvier 1997, les publications de la CEI As from 1 J anuary 1997 all IEC publications are
sont numérotées à partir de 60000. Ainsi, la CEI 34-1 issued with a designation in the 60000 series. For
devient la CEI 60034-1. example, IEC 34-1 is now referred to as IEC 60034-1.
Editions consolidées Consolidated editions
Les versions consolidées de certaines publications de la The IEC is now publishing consolidated versions of its
CEI incorporant les amendements sont disponibles. Par publications. For example, edition numbers 1.0, 1.1
exemple, les numéros d’édition 1.0, 1.1 et 1.2 indiquent and 1.2 refer, respectively, to the base publication,
respectivement la publication de base, la publication de the base publication incorporating amendment 1 and
base incorporant l’amendement 1, et la publication de the base publication incorporating amendments 1
base incorporant les amendements 1 et 2. and 2.
Informations supplémentaires Further information on IEC publications
sur les publications de la CEI
Le contenu technique des publications de la CEI est The technical content of IEC publications is kept
constamment revu par la CEI afin qu'il reflète l'état under constant review by the IEC, thus ensuring that
actuel de la technique. Des renseignements relatifs à the content reflects current technology. Information
cette publication, y compris sa validité, sont dispo- relating to this publication, including its validity, is
nibles dans le Catalogue des publications de l a CEI available in the IEC Catalogue of publications
(voir ci-dessous) en plus des nouvelles éditions, (see below) in addition to new editions, amendments
amendements et corrigenda. Des informations sur les and corrigenda. Information on the subjects under
sujets à l’étude et l’avancement des travaux entrepris consideration and work in progress undertaken by the
par le comité d’études qui a élaboré cette publication, technical committee which has prepared this
ainsi que la liste des publications parues, sont publication, as well as the list of publications issued,
également disponibles par l’intermédiaire de: is also available from the following:
• Site web de la CEI (www.iec.ch) • IEC Web Site (www.iec.ch)
• Catalogue des publications de la CEI • Catalogue of IEC publications
Le catalogue en ligne sur le site web de la CEI The on-line catalogue on the IEC web site
(www.iec.ch/catlg-f.htm) vous permet de faire des (www.iec.ch/catlg-e.htm) enables you to search
recherches en utilisant de nombreux critères, by a variety of criteria including text searches,
comprenant des recherches textuelles, par comité technical committees and date of publication. On-
d’études ou date de publication. Des informations line information is also available on recently
en ligne sont également disponibles sur les issued publications, withdrawn and replaced
nouvelles publications, les publications rempla- publications, as well as corrigenda.
cées ou retirées, ainsi que sur les corrigenda.
• IEC Just Published
• IEC Just Published
Ce résumé des dernières publications parues
This summary of recently issued publications
(www.iec.ch/JP.htm) est aussi disponible par
(www.iec.ch/JP.htm) is also available by email.
courrier électronique. Veuillez prendre contact
Please contact the Customer Service Centre (see
avec le Service client (voir ci-dessous) pour plus
below) for further information.
d’informations.
• Service clients
• Customer Service Centre
Si vous avez des questions au s ujet de c ette
If you h ave any questions regarding this
publication ou avez besoin de renseignements
publication or need further assistance, please
supplémentaires, prenez contact avec le Service
contact the Customer Service Centre:
clients:
Email: custserv@iec.ch
Email: custserv@iec.ch
Tél: +41 22 919 02 11
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
Fax: +41 22 919 03 00
.
NORME CEI
INTERNATIONALE IEC
60730-2-14
INTERNATIONAL
Edition 1.1
STANDARD
2001-08
Edition 1:1995 consolidée par l'amendement 1:2001
Edition 1:1995 consolidated with amendment 1:2001
Dispositifs de commande électrique automatiques
à usage domestique et analogue –
Partie 2-14:
Règles particulières pour les actionneurs
électriques
Automatic electrical controls for household
and similar use –
Part 2-14:
Particular requirements for electric actuators
IEC 2001 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
CF
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
– 2 – 60730-2-14 © CEI:1995+A1:2001
SOMMAIRE
AVANT-PROPOS . 4
1 Domaine d'application et références normatives . 8
2 Définitions. 10
3 Prescriptions générales . 12
4 Généralités sur les essais . 12
5 Caractéristiques nominales . 12
6 Classification .12
7 Informations.14
8 Protection contre les chocs électriques . 16
9 Dispositions en vue de la mise à la terre de protection. 16
10 Bornes et connexions. 16
11 Prescriptions de construction . 16
12 Résistance à l'humidité et à la poussière . 16
13 Résistance d'isolement et rigidité diélectrique. 16
14 Echauffements . 16
15 Tolérances de fabrication et dérive . 18
16 Contraintes climatiques. 18
17 Endurance .20
18 Résistance mécanique . 20
19 Pièces filetées et connexions . 20
20 Lignes de fuite, distances dans l'air et distances à travers l'isolation. 20
21 Résistance à la chaleur, au feu et aux courants de cheminement. 20
22 Résistance à la corrosion. 20
23 Prescriptions de compatibilité électromagnétique (CEM) – Emission . 20
24 Eléments constituants . 20
25 Fonctionnement normal. 20
26 Prescriptions de compatibilité électromagnétique (CEM) – Immunité. 22
27 Fonctionnement anormal. 22
28 Guide sur l'utilisation des coupures électroniques . 24
Annnexes . 26
Annexe D Chaleur, feu et courant de cheminement . 26
Annexe H (normative) Prescriptions pour les dispositifs de commande électroniques. 28
Figures. 24
Tableau 7.2 . 14
Tableau 27.2 – Températures maximales permises pour l'essai des conditions
de sortie bloquée. 22
©
60730-2-14 IEC:1995+A1:2001 – 3 –
CONTENTS
FOREWORD . 5
1 Scope and normative references. 9
2 Definitions. 11
3 General requirements . 13
4 General notes on tests. 13
5 Rating. 13
6 Classification .13
7 Information .15
8 Protection against electric shock. 17
9 Provision for protective earthing. 17
10 Terminals and terminations . 17
11 Constructional requirements . 17
12 Moisture and dust resistance . 17
13 Electric strength and insulation resistance . 17
14 Heating . 17
15 Manufacturing deviation and drift . 19
16 Environmental stress . 19
17 Endurance .21
18 Mechanical strength. 21
19 Threaded parts and connections . 21
20 Creepage distances, clearances and distances through insulation . 21
21 Resistance to heat, fire and tracking . 21
22 Resistance to corrosion. 21
23 Electromagnetic compatibility (EMC) requirements – Emission. 21
24 Components . 21
25 Normal operation . 21
26 Electromagnetic compatibility (EMC) requirements – Immunity. 23
27 Abnormal operation. 23
28 Guidance on the use of electronic disconnection. 25
Annexes . 27
Annex D Heat, fire and tracking. 27
Annex H (normative) Requirements for electronic controls . 29
Figures. 25
Table 7.2. 15
Table 27.2 – Maximum permitted temperatures for test of blocked output conditions . 23
– 4 – 60730-2-14 © CEI:1995+A1:2001
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
DISPOSITIFS DE CO
...
IEC 60730-2-14
Edition 1.2 2008-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Automatic electrical controls for household and similar use –
Part 2-14: Particular requirements for electric actuators
Dispositifs de commande électrique automatiques à usage domestique et
analogue –
Partie 2-14: Règles particulières pour les actionneurs électriques
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60730-2-14
Edition 1.2 2008-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Automatic electrical controls for household and similar use –
Part 2-14: Particular requirements for electric actuators
Dispositifs de commande électrique automatiques à usage domestique et
analogue –
Partie 2-14: Règles particulières pour les actionneurs électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CH
CODE PRIX
ICS 29.120.01; 97.120 ISBN 2-8318-9604-5
– 2 – 60730-2-14 © IEC:1995+A1:2001
+A2:2007
CONTENTS
FOREWORD.3
1 Scope and normative references .5
2 Definitions.6
3 General requirements .7
4 General notes on tests .7
5 Rating.7
6 Classification.7
7 Information.8
8 Protection against electric shock .9
9 Provision for protective earthing .9
10 Terminals and terminations.9
11 Constructional requirements.9
12 Moisture and dust resistance .9
13 Electric strength and insulation resistance.9
14 Heating.9
15 Manufacturing deviation and drift.10
16 Environmental stress.10
17 Endurance.11
18 Mechanical strength.11
19 Threaded parts and connections.11
20 Creepage distances, clearances and distances through solid insulation .11
21 Resistance to heat, fire and tracking.11
22 Resistance to corrosion.11
23 Electromagnetic compatibility (EMC) requirements – Emission .11
24 Components.11
25 Normal operation.11
26 Electromagnetic compatibility (EMC) requirements – Immunity .12
27 Abnormal operation.12
28 Guidance on the use of electronic disconnection .13
Annexes .14
Annex D (informative) Heat, fire and tracking (applicable in Canada and the USA) .14
Annex H (normative) Requirements for electronic controls.15
Figures .13
Table 7.2 .8
Table 27.2 – Maximum permitted temperatures for test of blocked output conditions .12
60730-2-14 © IEC:1995+A1:2001 – 3 –
+A2:2007
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD
AND SIMILAR USE –
Part 2-14: Particular requirements for electric actuators
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60730-2-14 has been prepared by IEC technical committee 72:
Automatic controls for household use.
This consolidated version of IEC 60730-2-14 consists of the first edition (1995) [documents
72/307/FDIS and 72/339/RVD], its amendment 1 (2001) [documents 72/480/FDIS
and 72/502/RVD] and its amendment 2 (2007) [documents 72/748/FDIS and 72/756/RVD].
The technical content is therefore identical to the base edition and its amendments and has
been prepared for user convenience.
It bears the edition number 1.2.
A vertical line in the margin shows where the base publication has been modified by
amendments 1 and 2.
– 4 – 60730-2-14 © IEC:1995+A1:2001
+A2:2007
This Part 2-14 is intended to be used in conjunction with IEC 60730-1. It was established on
the basis of the third edition of that standard (1999) and its amendment 1 (2003).
Consideration may be given to future editions of, or amendments to, IEC 60730-1.
This part 2-14 supplements or modifies the corresponding clauses in IEC 60730-1, so as to
convert that publication into the IEC standard: Particular requirements for electric actuators.
Where this part 2-14 states "addition", "modification" or "replacement", the relevant require-
ment, test specification or explanatory matter in part 1 should be adapted accordingly.
Where no change is necessary part 2-14 indicates that the relevant clause or subclause
applies.
In the development of a fully international standard it has been necessary to take into
consideration the differing requirements r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.