IEC 60730-2-14:1995/AMD2:2007
(Amendment)Amendment 2 - Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
Amendment 2 - Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
Amendement 2 - Dispositifs de commande électrique automatiques à usage domestique et analogue - Partie 2-14: Règles particulières pour les actionneurs électriques
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 60730-2-14
Edition 1.0 2007-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 2
AMENDEMENT 2
Automatic electrical controls for household and similar use –
Part 2-14: Particular requirements for electric actuators
Dispositifs de commande électrique automatiques à usage domestique et
analogue –
Partie 2-14: Règles particulières pour les actionneurs électriques
IEC 60730-2-14 A2:2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60730-2-14
Edition 1.0 2007-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 2
AMENDEMENT 2
Automatic electrical controls for household and similar use –
Part 2-14: Particular requirements for electric actuators
Dispositifs de commande électrique automatiques à usage domestique et
analogue –
Partie 2-14: Règles particulières pour les actionneurs électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
G
CODE PRIX
ICS 29.120.01; 97.120 ISBN 2-8318-9357-7
– 2 – 60730-2-14 Amend. 2 © IEC:2007
FOREWORD
This amendment has been prepared by IEC technical committee 72: Automatic controls for
household use.
The text of this amendment is based on the following documents:
FDIS Report on voting
72/748/FDIS 72/756/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
This amendment is based on 60730-2-14, Edition 1 (1995), and its amendment 1 (2001).
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
Page 3
CONTENTS
Replace the existing titles of Clauses 20 and Annex D by their respective new titles as follows:
20 Creepage distances, clearances and distances through solid insulation
Annex D (informative) Heat, fire and tracking (applicable in Canada and the USA)
Page 5
FOREWORD
Replace the second paragraph after the report on voting table with the following new
paragraph:
This Part 2-14 is intended to be used in conjunction with IEC 60730-1. It was established on
the basis of the third edition of that standard (1999) and its amendment 1 (2003).
Consideration may be given to future editions of, or amendments to, IEC 60730-1.
60730-2-14 Amend. 2 © IEC:2007 – 3 –
Page 13
6 Classification
6.1.1 Replace the existing subclause with the following new subclause:
6.1.1 Control for a.c. only
Electric actuators which are designed for a.c. supply only shall not be used on d.c. supply.
6.3 According to their purpose
Add the following additional subclause:
6.3.102 – electric actuator as a component of a multi-purpose control or system (Type 1.AC
or 2.AC).
NOTE For example, as a component of a burner control system according to IEC 60730-2-5.
Page 15
Add the following subclause:
7.3.1 Addition:
NOTE Actuators of class II construction provided with a cord for connection to the fixed wiring which does not
have a plug fitted may carry the symbol for class II construction.
Page 23
20 Creepage distances, clearances and distances through insulation
Replace the existing title with the following new title:
20 Creepage distances, clearances and distances through solid insulation
Page 25
25 Normal operation
Replace the existing text with the following new text:
This clause of Part 1 is applicable.
26 Electromagnetic compatibility (EMC) requirements – Immunity
Replace the existing text with the following new text:
This clause of Part 1 is applicable.
– 4 – 60730-2-14 Amend. 2 © IEC:2007
Page 29
Annex D – Heat, fire and tracking
Replace the existing title with the following new title:
Annex D
(informative)
Heat, fire and tracking
(applicable in Canada and the USA)
Replace the existing first paragraph with the following new paragraph:
This annex of Part 1 is applicable except as follows:
Page 31
Annex H – Requirements for electronic controls
H.26 Electromagnetic compatibility (EMC) requirements – immunity
Add the following subclause:
H.26.1 Addition:
If an electric actuator is a component of a multi-purpose control or system and provides a
protective control function, then the electric actuator shall be treated as a protective control
throughout Clause H.26.
Delete the following subclause:
H.26.4 Test of the influence of signal voltages in the power supply networks
H.26.5 Test of the influence of voltage dips and short voltage interruptions in the power
supply network
Replace the existing title and text of Subclause H.26.5, including Subclauses H.26.5.4 and
H.26.5.4.101, by the following new Subclause H.26.5 as follows:
H.26.5 Voltage dips and voltage interruptions in the power supply network
H.26.5.3 Test procedure
Addition:
Each test is performed three times.
60730-2-14 Amend. 2 © IEC:2007 – 5 –
Additional subclause:
H.26.5.3.101 Compliance
After the test according to H.26.5.3 of all the voltage dips and the voltage interruption of more
than one cycle of the supply wave form, the electric actuator shall provide normal operation.
During the test according to H.26.5.3 of an interruption of one cycle of the supply wave form,
the control shall continue to operate after restoration of the supply voltage from the position the
electric actuator was in right before the interruption.
H.26.7 Delete the existing subclause.
Add the following new subclause:
H.26.8 Surge immunity test
H.26.8.3 Test procedure
Addition:
The five pulses in each polarity shall be distributed in the following operating modes:
– 1 pulse in the closed position;
– 3 pulses during energized movement in the most surge sensitive position;
– 1 pulse in the open position.
H.26.9 Electrical fast transient/burst test
Add the following new subclause:
H.26.9.3 Test procedure
Addition:
Operating modes are:
– being in the closed position;
– during energized movement in the most surge sensitive position;
– being in the open position.
The test shall be performed in each operating mode for 1 min each with positive and negative
polarity.
Additional subclause:
H.26.9.3.101 Compliance
The electric actuator shall tolerate electrical fast/transient bursts on the mains supply and
signal lines, so that, when tested in accordance with H.26.9.3,
a) for the value of severity level 2: it shall continue to function in accordance with the
requirements of this standard. No influence to the actual position of the electric actuator is
recognized;
b) for the value of severity level 3: For a protective electric actuator used as a component of a
protective multi-purpose control or system it shall either perform as in a) or it may stop
– 6 – 60730-2-14 Amend. 2 © IEC:2007
operating and shall indicate that it has done so to the protective multi-purpose control or
system.
NOTE The acceptability of the indication to the protective multi-purpose control or system is dependent on the
application.
Page 33
H.26.13 Evaluation of compliance
Replace the existing subclause with the following new subclause:
H.26.13 Test of influence of supply frequency variations
Addition:
This subclause is applicable for electric actuators where the travel time depends on the supply
frequency.
H.26.13.3 Test procedure
Addition:
The travel time to move the electric actuator from the closed position to the open position as
well as in the other direction shall be verified for each of the frequencies of Table H.26.13.2.
Additional subclause:
H.26.13.3.101 Compliance
The percentage of the travel time deviation shall not be higher than the percentage of the
frequency variation.
Add the following new subclause:
H.26.14 Power frequency magnetic field immunity test
Modification:
Replace the second paragraph with the following new paragraph:
Compliance is checked by H.26.14.3.101 after the test of H.26.14.2.
H.26.14.3 Test procedure
Addition:
Operating modes are:
– being in the closed position;
– moving between the closed and open position and vice-a-versa (being in operation);
– being in the open position.
The test shall be performed in all three operating modes.
Additional subclause:
60730-2-14 Amend. 2 © IEC:2007 – 7 –
H.26.14.3.101 Compliance
The electric actuator shall tolerate power frequency magnetic field, so that, when tested in
accordance with H.26.14.3,
a) for the value of severity level 2: it shall continue to function in accordance with the
requirements of this standard. No influence to the actual position of the electric actuator
shall be recognized;
b) for the value of severity level 3: For a protective electric actuator used as a component of a
protective multi-purpose control or system it shall either perform as in a) or it may stop
operating and shall indicate that is has done so to the protective multi-purpose control or
system.
NOTE The acceptability of the indication to the protective multi-purpose control or system is dependent on the
application.
Add the following new subclause:
H.26.15.4 Addition:
The electric actuator shall tolerate the various effects, so that, when tested in accordance with
Clause H.26,
a) for the value of severity level 2: it shall continue to function in accordance with the
requirements of this standard. No influence to the actual position of the electric actuator
shall be recognized;
b) for the value of severity level 3: For a protective electric actuator used as a component of a
protective multi-purpose control or system it shall either perform as in a) or it may stop
operating and shall indicate that is has done so to the protective multi-purpose control or
system.
The electric actuator may return to its initial state and thereafter resume normal operation.
___________
– 8 – 60730-2-14 Amend. 2 © CEI:2007
AVANT-PROPOS
Le présent amendement
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.