iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC TR 62836:2013

(Main)

Measurement of internal electric field in insulating materials - Pressure wave propagation method

Measurement of internal electric field in insulating materials - Pressure wave propagation method

IEC/TR 62836:2013(E), which is a technical report, contains an efficient and reliable procedure to test the internal electric field in the insulating materials used for high-voltage applications using the pressure wave propagation (PWP) method. It is suitable for a sample with homogeneous insulating materials and an electric field higher than 1 kV/mm, but it is also depended on the thickness of sample and the pressure wave generator.

General Information

Status
Replaced
Publication Date
24-Sep-2013
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
17.220.99 - Other standards related to electricity and magnetism
29.035.01 - Insulating materials in general
Technical Committee
TC 112 - Evaluation and qualification of electrical insulating materials and systems
Drafting Committee
WG 8 - TC 112/WG 8
Current Stage
DELPUB - Deleted Publication
Completion Date
05-Nov-2020
Ref Project

Relations

Revised
IEC TS 62836:2020 - Measurement of internal electric field in insulating materials - Pressure wave propagation method
Effective Date
05-Sep-2023

Buy Standard

IEC TR 62836:2013 - Measurement of internal electric field in insulating materials - Pressure wave propagation methodIEC TR 62836:2013 - Measurement of internal electric field in insulating materials - Pressure wave propagation method
PreviousNext
Technical report
IEC TR 62836:2013 - Measurement of internal electric field in insulating materials - Pressure wave propagation method
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC/TR 62836
®

Edition 1.0 2013-09
TECHNICAL
REPORT

colour
inside


Measurement of internal electric field in insulating materials – Pressure wave
propagation method

IEC/TR 62836:2013(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2013 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

---------------------- Page: 2 ----------------------
IEC/TR 62836

®


Edition 1.0 2013-09




TECHNICAL



REPORT








colour

inside










Measurement of internal electric field in insulating materials – Pressure wave

propagation method



























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION

PRICE CODE
M


ICS 17.220.99; 29.035.01 ISBN 978-2-8322-1102-1



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – TR 62836 © IEC:2013(E)
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Terms, definitions and abbreviations . 6
2.1 Terms and definitions . 6
2.2 Abbreviations . 6
3 Principle of the method . 6
4 Sample conditions . 8
5 Electrode materials . 8
6 Pressure pulse wave generation . 8
7 Set-up of the measurement. 8
8 Calibrating the electric field . 9
9 Measurement procedure . 9
10 Data processing for the experimental measurement . 9
11 Measurement examples .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62631-3-4:2019(Main)
Dielectric and resistive properties of solid insulating materials - Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures

IEC 62631-3-4:2019 covers procedures for the determination of insulation resistance and volume resistivity of insulating materials by applying DC-voltage and temperatures up to 800 °C. The typical application materials include high temperature mica plate and alumina ceramics.
This edition of IEC 62631-3-4 cancels and replaces IEC 60345 “Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures”, published in 1971. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 60345:  
The revised standard becomes part of the series IEC 62631-3-x. Title of the standard is changed and adapted to the series as Part 3-4.
Clauses 2 "Normative references", 3 "Terms and definitions", and 4 "Significance" are added.
Subclauses 5.2 "Power supply, Voltage", 5.3.1.2 "Number of test specimens" and 5.3.1.3 "Conditioning and pre-treatment of test specimens" are added.
In 5.3.5 "Special precautions during measurements", errors analysis in the measurement of current are modified, and aligned with IEC 62631-3-1.
In 6.2 "Increasing the temperature by steps (method B)", the method for more than one specimen is removed.
The standard atmospheric conditions for testing and conditioning, especially the temperature, are replaced according to IEC 60212.
The circuit diagram of test apparatus is modified, and the structure diagram and pictures of test apparatus are added in Annex A.
The orders of part clauses are adjusted.

  • Standard
    28 pages
    English and French language
    sale 15% off
IEC
IEC 62631-2-1:2018(Main)
Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0,1 Hz - 10 MHz) - AC Methods

IEC 62631-2-1:2018 describes test methods for the determination of permittivity and dissipation factor properties of solid insulating materials (AC methods from 0,1 Hz up to 10 MHz).
This first edition cancels and replaces the first edition IEC 60250, published in 1969. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a. technical frequencies confined to AC methods;
b. update on measurements on solid dielectric materials.

  • Standard
    45 pages
    English and French language
    sale 15% off
IEC
IEC 62631-3-11:2018(Main)
Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DC Methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials

IEC 62631-3-11:2018 covers a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying DC voltage. It covers the materials described in IEC 60455-3-5, IEC 60464-3-1, IEC 60464-3-2 and similar products.

  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 62631-3-1:2016(Main)
Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method

IEC 62631-3-1:2016 covers a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying a DC voltage. This edition includes the following significant technical changes with respect to the second edition of IEC 60093:
a) IEC 60093 has been completely revised, both editorially and technically, and incorporated into the new IEC 62631 series;
b) test methods have been updated to current day state of the art;
c) volume and surface resistance and resistivity are now separated to appear in this part of IEC 62631 and in IEC 62631-3-2, respectively.

  • Standard
    26 pages
    English and French language
    sale 15% off
IEC
IEC 62631-3-3:2015(Main)
Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC methods) - Insulation resistance

IEC 62631-3-3:2015 covers methods of test for the determination of the insulation resistance of electrical insulating materials or insulating systems by applying DC voltage. This first edition cancels and replaces the first edition of IEC 60167, published in 1964, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the first edition of IEC 60167:
a) IEC 60167 has been completely revised, both editorially and technically, and incorporated into the new IEC 62631 series;
b) test methods have been updated to current day state of the art.

  • Standard
    32 pages
    English and French language
    sale 15% off
IEC
IEC 62631-3-2:2015(Main)
Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity

IEC 62631-3-2:2015 covers methods of test for the determination of surface resistance and surface resistivity of electrical insulation materials by applying DC voltage. This first edition cancels and replaces the second edition of IEC 60093, published in 1980, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the second edition of IEC 60093:
a) IEC 60093 has been completely revised, both editorially and technically, and incorporated into the new IEC 62631 series;
b) test methods have been updated to current day state of the art;
c) volume and surface resistance and resistivity are now separated into IEC 62631-3-1 and IEC 62631-3-2, respectively.

  • Standard
    34 pages
    English and French language
    sale 15% off
IEC
IEC 61251:2015(Main)
Electrical insulating materials and systems - AC voltage endurance evaluation

IEC 61251:2015 describes many of the factors involved in voltage endurance tests on electrical insulating materials and systems. It describes the voltage endurance graph, lists test methods illustrating their limitations and gives guidance for evaluating the sinusoidal a.c. voltage endurance of insulating materials and systems from the results of the tests. This International Standard is applicable over the voltage frequency range 20 Hz to 1 000 Hz. The general principles can also be applicable to other voltage shapes, including impulse voltages. The terminology to be used in voltage endurance is defined and explained. This first edition of IEC 61251 cancels and replaces the second edition of IEC TS 61251, published in 2008. This edition constitutes a technical revision and includes the following significant technical changes with respect to the second edition of IEC TS 61251:
a) upgrade from Technical Specification to an International Standard;
b) clarification of issues raised since publication of IEC TS 61251.

  • Standard
    42 pages
    English and French language
    sale 15% off
IEC
IEC 60243-2:2013(Main)
Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage

IEC 60243-2:2013 gives requirements additional to those in IEC 60243-1 for the determination of the electric strength of solid insulating materials under direct voltage stress. This third edition cancels and replaces the second edition published in 2001, and constitutes an editorial revision.
This publication is to be read in conjunction with IEC 60243-1:2013.

  • Standard
    17 pages
    English and French language
    sale 15% off
IEC
IEC 60243-3:2013(Main)
Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests

IEC 60243-3:2013 gives requirements additional to those in IEC 60243-1 for the determination of the electric strength of solid insulating materials under 1,2/50 µs impulse voltage stress. This third edition cancels and replaces the second edition, published in 2001, and constitutes an editorial revision.
This publication is to be read in conjunction with IEC 60243-1:2013.

  • Standard
    17 pages
    English and French language
    sale 15% off
IEC
IEC 60243-1:2013(Main)
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies

IEC 60243-1:2013 provides test methods for the determination of short-time electric strength of solid insulating materials at power frequencies between 48 Hz and 62 Hz. This standard does not cover the testing of liquids and gases, although these are specified and used as impregnates or surrounding media for the solid insulating materials being tested. NOTE: Methods for the determination of breakdown voltages along the surfaces of solid insulating materials are included.

  • Standard
    53 pages
    English and French language
    sale 15% off