Electric cables - Calculation of the current rating - Part 3-2: Sections on operating conditions - Economic optimization of power cable size

IEC 60287-3-2:2012 sets out a method for the selection of a cable size taking into account the initial investments and the future costs of energy losses during the anticipated operational life of the cable. Matters such as maintenance, energy losses in forced cooling systems and time of day energy costs have not been included in this standard. Two examples of the application of the method to hypothetical supply systems are given in Annex A.

Câbles électriques - Calcul du courant admissible - Partie 3-2: Sections concernant les conditions de fonctionnement - Optimisation économique des sections d'âme de cables électriques de puissance

La CEI 60287-3-2:2012 traite du choix économique de la section d'un câble prenant en compte les coûts des investissements initiaux et les coûts futurs des pertes d'énergie pendant la durée de service attendue du câble. Les questions telles que la maintenance, les pertes d'énergie dans les systèmes à refroidissement forcé et les coûts horaires de l'énergie ne sont pas traitées dans cette norme. Deux exemples d'application de la méthode à des systèmes d'alimentation théoriques sont donnés à l'Annexe A.

General Information

Status
Published
Publication Date
03-Jul-2012
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
15-Jul-2012
Completion Date
04-Jul-2012
Ref Project

Relations

Buy Standard

Standard
IEC 60287-3-2:2012 - Electric cables - Calculation of the current rating - Part 3-2: Sections on operating conditions - Economic optimization of power cable size
English and French language
77 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60287-3-2 ®
Edition 2.0 2012-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric cables – Calculation of the current rating –
Part 3-2: Sections on operating conditions – Economic optimization of power
cable size
Câbles électriques – Calcul du courant admissible –
Partie 3-2: Sections concernant les conditions de fonctionnement – Optimisation
économique des sections d'âme de câbles électriques de puissance

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 60287-3-2 ®
Edition 2.0 2012-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric cables – Calculation of the current rating –

Part 3-2: Sections on operating conditions – Economic optimization of power

cable size
Câbles électriques – Calcul du courant admissible –

Partie 3-2: Sections concernant les conditions de fonctionnement – Optimisation

économique des sections d'âme de câbles électriques de puissance

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX W
ICS 29.060.20 ISBN 978-2-83220-151-0

– 2 – 60287-3-2 © IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 8
2 Normative references . 8
3 Symbols . 8
4 Calculation of total costs . 10
5 Determination of economic conductor sizes . 13
5.1 First approach: economic current range for each conductor in a series of
sizes . 13
5.2 Second approach: economic conductor size for a given load . 13
5.2.1 General equation . 13
5.2.2 Linear cost function for cable costs. 14
5.2.3 Effect of charging current and dielectric losses . 15
Annex A (informative) Examples of calculation of economic conductor sizes . 17
Annex B (informative) Mean conductor temperature and resistance . 33
Bibliography . 38

Figure A.1 – System layout . 26
Figure A.2 – Economic current ranges . 27
Figure A.3 – Variation of cost with conductor size . 28

2 2
Table A.1 – Economic current ranges for cable sizes 25 mm to 400 mm . 19
Table A.2 – Summary of costs . 23
Table A.3 – Cable details . 23
Table A.4 – Economic loading . 24
Table A.5 – Current-carrying capacity criterion . 24
Table A.6 – Economic loading, standard conductor size for all sections – Standard
size: 150 mm2 . 25
Table A.7 – Economic loading, standard conductor size for all sections – Standard
size: 185 mm . 25
Table A.8 – Economic loading, standard conductor size for all sections – Standard
size: 240 mm . 26
Table A.9 – Cable details . 29
Table A.10 – Steady state current ratings . 30
Table A.11 – Total costs . 31
Table A.12 – Total cost versus anticipated operational life . 31
Table A.13 – Losses versus anticipated operational life . 32
Table B.1 – Required data for conductor sizes for the above example . 34

60287-3-2 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC CABLES –
CALCULATION OF THE CURRENT RATING –

Part 3-2: Sections on operating conditions –
Economic optimization of power cable size

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60287-3-2 has been prepared by IEC technical committee 20:
Electric cables.
This second edition cancels and replaces the first edition, published in 1995 and its
Amendment 1:1996. This edition consitutes a technical revision. This edition incorporates
Amendment 2 which was not published separately due to the number of changes and pages.
The main changes with respect to the previous edition are as follows:
– update of the normative references;
– clarification of some symbols;
– correction of some formulae;
– introduction of a second example in Annex A for the calculation of the economic conductor
size.
– 4 – 60287-3-2 © IEC:2012
The text of this standard is based on the first edition, its amendment 1 and the following
documents:
FDIS Report on voting
20/1367/FDIS 20/1373/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 60287 series can be found on the IEC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.