IEC 61196-9:2014

Coaxial communication cables - Part 9: Sectional specification for RF flexible cables

IEC 61196-9:2014(E) applies to RF flexible coaxial communication cables with a characteristic impedance of 50 Ω and with solid or with semi-air-spaced dielectric.
This publication is to be read in conjunction with IEC 61196-1:2005

General Information

• Status: Published
• Publication Date: 21-Jan-2014
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: SC 46A - Coaxial cables
• Current Stage: DELPUB - Deleted Publication
• Start Date: 06-Jul-2022
• Completion Date: 28-Jun-2023

Relations

• Revised: IEC 61196-9:2023 - Coaxial communication cables - Part 9: Sectional specification for flexible RF coaxial cables
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61196-9 ®
Edition 1.0 2014-01
INTERNATIONAL
STANDARD
Coaxial communication cables –
Part 9: Sectional specification for RF flexible cables

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 61196-9 ®
Edition 1.0 2014-01
INTERNATIONAL
STANDARD
Coaxial communication cables –

Part 9: Sectional specification for RF flexible cables

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
N
ICS 33.120.10 ISBN 978-2-8322-1364-3

– 2 – 61196-9  IEC:2014(E)
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Materials and cable construction . 7
4.1 Cable construction . 7
4.2 Inner conductor . 7
4.3 Dielectric . 8
4.4 Outer conductor or screen . 8
4.5 Sheath . 8
5 Standard ratings and characteristics . 8
5.1 Operational temperatures. 8
5.2 Operating frequency . 8
5.3 Current-carrying capacity . 9
6 Identification, marking and labelling . 9
6.1 Cable identification . 9
6.2 IEC marking . 9
6.3 Labelling . 9
7 Tests of finished cables . 9
7.1 Electrical testing of the finished cable . 9
7.1.1 Low-frequency and d.c. electrical measurements . 9
7.1.2 High-frequency electrical and transmission measurements . 10
Environmental testing of the finished cable . 11
7.2
7.3 Mechanical testing of the finished cables . 12
7.4 Fire performance test methods . 12
8 Quality assessment . 13
9 Delivery and storage . 13

Bibliography . 14

Table 1 – Operational temperatures . 8
Table 2 – Low-frequency and d.c. electrical measurements . 9
Table 3 – High-frequency electrical and transmission measurements . 10
Table 4 – Environmental testing of the finished cable . 11
Table 5 – Mechanical testing . 12
Table 6 – Fire performance test methods . 13

61196-9  IEC:2014(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COAXIAL COMMUNICATION CABLES –

Part 9: Sectional specification for RF flexible cables

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61196-9 has been prepared by subcommittee 46A: Coaxial cables,
of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories.
The text of this standard is based on the following documents:
FDIS Report on voting
46A/1166/FDIS 46A/1178/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard is intended to be read in conjunction with IEC 61196-1. It is based on the
second edition (2005) of that standard.

– 4 – 61196-9  IEC:2014(E)
A list of all parts of the IEC 61196 series, under the general title: Coaxial communication
cables, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

61196-9  IEC:2014(E) – 5 –
COAXIAL COMMUNICATION CABLES –

Part 9: Sectional specification for RF flexible cables

1 Scope
This part of IEC 61196 applies to RF flexible coaxial communication cables with a
characteristic impedance of 50 Ω and with solid or with semi-air-spaced dielectric.
It is to be read in conjunction with IEC 61196-1.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60068-1:2013, Environmental testing – Part 1: General and guidance
IEC 60068-2-20, Environmental testing – Part 2-20: Tests – Test T: Test methods for
solderability and resistance to soldering heat of devices with leads
IEC 60096-0-1, Radio frequency cables – Part 0-1: Guide to the design of detail specifications
– Coaxial cables
IEC 60332 (all parts), Tests on electric and optical fibre cables under fire conditions
IEC 60754-1, Test on gases evolved during combustion of materials from cables – Part 1:
Determination of the halogen acid gas content
IEC 60811-406, Electric and optical fibre cables – Test methods for non-metallic materials –
Part 406: Miscellaneous tests – Resistance to stress cracking of polyethylene and
polypropylene compounds
IEC 60811-607, Electric and optical fibre cables – Test methods for non-metallic materials –
Part 607: Physical tests – Test for the assessment of carbon black dispersion in polyethylene
and polypropylene
IEC 61034-2, Measurement of smoke density of cables burning under defined conditions –
Part 2: Test procedure and requirements
IEC 61196-1:2005, Coaxial communication cables – Part 1: Generic specification – General,
definitions and requirements
IEC 61196-1-1, Coaxial communication cables – Part 1-1: Capability approval for coaxial
cables
IEC 61196-1-101, Coaxial communication cables – Part 1-101: Electrical test methods – Test
for conductor d.c. resistance of cable

– 6 – 61196-9  IEC:2014(E)
IEC 61196-1-102, Coaxial communication cables – Part 1-102: Electrical test methods – Test
for insulation resistance of cable dielectric
IEC 61196-1-103, C
...