29.035.30 - Glass and ceramic insulating materials
ICS 29.035.30 Details
Glass and ceramic insulating materials
Glasisolierstoffe. Keramikisolierstoffe
Isolants electriques a base de verre et ceramique
Stekleni in keramični izolacijski materiali
General Information
IEC 61196-6-3:2018(E) applies to coaxial communication cables described in IEC 61196-6. It specifies the requirements for 75-5 type CATV drop cables. These cables are used in CATV distribution systems, surveillance and control systems, satellite television receiving systems and as bidirectional hybrid fibre coax (HFC). The operating frequency is from 5 MHz to 3 000 MHz.
This part of IEC 61196 is to be used in conjunction with IEC 61196-1:2005 and IEC 61196 6:2009. It determines the layout and style with respect to the model and type.
- Standard12 pagesEnglish languagesale 15% off
This sheet of IEC 60454-3 contains the requirements for - glass fabric tapes with pressure-sensitive adhesive, - cellulose acetate woven fabric tapes with rubber thermosetting adhesive, - combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with thermosetting adhesive. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application, and not based on this specification alone.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
Supersedes HD 523.3.406 to 408 S1:1990
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
EN following parallel vote * Supersedes HD 523.3.403 to 405 S1:1990
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
EN following parallel vote * Supersedes HD 523.3.300 S1:1989
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
EN following parallel vote * Supersedes HD 523.3.400 to 402 S1:1993
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
EN following parallel vote
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
EN following parallel vote * Supersedes HD 426.2 S1:1987
- Standard48 pagesEnglish languagesale 10% offe-Library read for1 day
Applicable to ceramic, glass and glass-ceramic materials to be used for electrical insulation purposes. Specifies methods of test. Intended to provide test results typical of the material from which the test pieces are processed. Since, in the majority of cases, ceramic components for insulating purposes are of rather different size and shape to test pieces, the results of such tests provide only a guide to the actual properties of components. The limitations imposed by the method of forming and processing are discussed where relevant.
- Standard48 pagesEnglish languagesale 10% offe-Library read for1 day
Applicable to ceramic, glass and glass-ceramic materials to be used for electrical insulation purposes. Specifies methods of test. Intended to provide test results typical of the material from which the test pieces are processed. Since, in the majority of cases, ceramic components for insulating purposes are of rather different size and shape to test pieces, the results of such tests provide only a guide to the actual properties of components. The limitations imposed by the method of forming and processing are discussed where relevant.
- Standard87 pagesEnglish and French languagesale 15% off
EN following parallel vote
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
Gives methods of test for the materials defined in EN 61067-1.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
EN following parallel vote * Supersedes HD 426.3 S1
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies requirements for loomstate, continuous filament tapes woven on conventional or shuttleless looms from either glass fibres or a combination of glass and polyester fibres. The ranges of nominal sizes covered by this standard are: width: 10 mm to 50 mm, thickness: 0,05 mm to 0,40 mm.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
EN following parallel vote
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
Applicable to ceramic, glass-ceramic, glass-mica and glass materials for electrical insulating purposes giving a classification of materials and typical numerical values for the major characteristics.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
Applicable to ceramic, glass-ceramic, glass-mica and glass materials for electrical insulating purposes giving a classification of materials and typical numerical values for the major characteristics.
- Standard25 pagesEnglish and French languagesale 15% off
Specifies requirements for loomstate, continuous filament tapes woven on conventional or shuttleless looms from either glass fibres or a combination of glass and polyester fibres. The ranges of nominal sizes covered by this standard are: width: 10 mm to 50 mm, thickness: 0,05 mm to 0,40 mm.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
Gives methods of test for the materials defined in EN 61067-1.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
Superseded by EN 60454-3-8:2006
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
Superseded by EN 60672-2:2000
- Standardization document23 pagesEnglish languagesale 10% offe-Library read for1 day
Superseded by EN 60684-3-300:2002
- Standardization document5 pagesEnglish languagesale 10% offe-Library read for1 day
Superseded by EN 60684-3-400 to 402:2002
- Standardization document11 pagesEnglish languagesale 10% offe-Library read for1 day
Superseded by EN 60684-3-406 to 408:2003
- Standardization document7 pagesEnglish languagesale 10% offe-Library read for1 day
Superseded by EN 60684-3-403 to 405:2002
- Standardization document7 pagesEnglish languagesale 10% offe-Library read for1 day
Superseded by EN 61006:2004
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
Contains requirements for 3 types of pressure-sensitive adhesive tapes made with glass fabric. Products having thermal indices from 130 to 180 with rubber thermosetting adhesive, acrylic crosslinked and high temperature silicone adhesives.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day