IEC 63356-1:2023

LED light source characteristics - Part 1: Data sheets

IEC 63356-1:2023 specifies data sheets of LED lamps and LED modules with a series of parameters per data sheet for a specific LED light source that enables interchangeability between products from different LED light source manufacturers.
This second edition cancels and replaces the first edition published in 2022. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of datasheets for GH36d capped LED lamps;
b) addition of datasheets for GJ6.6t and GJ6.6d-1 capped LED lamps;
c) addition of datasheets for GR6d capped LED lamps.

Caractéristiques de source lumineuse à LED – Partie 1: Feuilles de caractéristiques

L'IEC 63356-1:2023 spécifie les feuilles de caractéristiques des lampes à LED et des modules de LED à l'aide d'une série de paramètres par feuille de caractéristiques pour une source lumineuse à LED spécifique qui permet l'interchangeabilité entre les produits de différents fabricants de source lumineuse à LED.
Cette deuxième édition annule et remplace la première édition parue en 2022. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout des feuilles de caractéristiques pour les lampes à LED à culots GH36d;
b) ajout des feuilles de caractéristiques pour les lampes à LED à culots GJ6.6t et GJ6.6d-1;
c) ajout des feuilles de caractéristiques pour les lampes à LED à culots GR6d.

General Information

• Status: Published
• Publication Date: 18-Sep-2023
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: SC 34A - Electric light sources
• Current Stage: PPUB - Publication issued
• Start Date: 06-Oct-2023
• Completion Date: 19-Sep-2023

Relations

• Revises: IEC 63356-1:2022 - LED light source characteristics - Part 1: Data sheets
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 63356-1 ®
Edition 2.0 2023-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
LED light source characteristics –
Part 1: Data sheets
Caractéristiques de source lumineuse à LED –
Partie 1: Feuilles de caractéristiques
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC -  IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur les adapté à vos besoins.
projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 300 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 19 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 63356-1 ®
Edition 2.0 2023-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
LED light source characteristics –

Part 1: Data sheets
Caractéristiques de source lumineuse à LED –

Partie 1: Feuilles de caractéristiques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99  ISBN 978-2-8322-7475-0

– 2 – IEC 63356-1:2023 © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Overview and common information . 7
4.1 General . 7
4.2 Numbering system . 7
4.3 List of data sheets . 8
4.3.1 List of single-capped LED lamp data sheets . 8
4.3.2 List of double-capped LED lamp data sheets . 8
4.3.3 List of LED module data sheets . 10
5 Single-capped LED lamp data sheets . 11
5.1 Single-capped LED lamps with GH36d caps . 11
5.1.1 Diagrammatic information for location of lamp dimensions . 11
5.1.2 Data sheets . 12
5.2 Other single-capped LED lamps . 17
6 Double-capped LED lamp data sheets . 17
6.1 Linear double-capped LED lamps with GX16t-5 caps . 17
6.1.1 Diagrammatic information for location of lamp dimensions . 17
6.1.2 Data sheets . 19
6.2 Linear double-capped LED lamps with GJ6.6 caps . 28
6.2.1 Diagrammatic information for location of lamp dimensions . 28
6.2.2 GJ6.6 lamp data sheets . 29
6.3 Linear double-capped LED lamps with GR6d caps . 44
6.3.1 Diagrammatic information for location of lamp dimensions . 44
6.3.2 Information for luminaire design . 45
6.3.3 Data sheets . 46
7 LED module data sheets . 51
Bibliography . 52

Figure 1 – Location of dimensions of single-capped lamps with a GH36d cap . 11
Figure 2 – Location of dimensions of linear double-capped lamps with GX16t-5 caps . 18
Figure 3 – Location of dimensions of linear double-capped lamps with GJ6.6 caps . 29
Figure 4 – Dimensions of linear double-capped lamps with GR6d caps . 45
Figure 5 – Mechanical dimensions for luminaire design. 45

Table 1 – List of data sheets for non-integrated single-capped LED lamps . 8
Table 2 – List of data sheets for semi-integrated single-capped LED lamps . 8
Table 3 – List of data sheets for integrated single-capped LED lamps . 8

Table 4 – List of data sheets for non-integrated double-capped LED lamps . 9
Table 5 – List of data sheets for semi-integrated double-capped LED lamps . 9
Table 6 – List of data sheets for integrated double-capped LED lamps . 10
Table 7 – List of data sheets for non-integrated LED modules. 10
Table 8 – List of data sheets for semi-integrated LED modules . 10
Table 9 – List of data sheets for integrated LED modules . 10

– 4 – IEC 63356-1:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LED LIGHT SOURCE CHARACTERISTICS –

Part 1: Data sheets
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 63356-1 has been prepared by subcommittee 34
...