IEC TR 63717:2026
(Main)Metadata and its carriage for professional cameras
- Abstract
IEC TR 63717:2026 summarizes the results of an investigation into camera metadata obtained by professional-use cameras during shooting and its carriage. When categorizing metadata from a process perspective into capturing, processing, and playout/distribution, the capturing process is within the scope of this document.
- Status
- Published
- Publication Date
- 12-Nov-2026
- Technical Committee
- TA 6 - Storage media, storage data structures, storage systems and equipment
- Drafting Committee
- PT 100-55 - TC 100/TA 6/PT 100-55
- Current Stage
- PPUB - Publication issued
- Start Date
- 13-Nov-2026
- Completion Date
- 11-Dec-2026
IEC TR 63717:2026 is an IEC Technical Report on metadata and its carriage for professional cameras. It summarizes an investigation into metadata captured during shooting and how that metadata is transported. The focus is the capturing process, with carriage described for serial digital interface (SDI), Internet Protocol (IP) streams, and file-based workflows.
What does IEC TR 63717:2026 specify?
IEC TR 63717:2026 covers camera metadata obtained by professional-use cameras during shooting and the ways that metadata is carried. The document is organized around the metadata itself, then the carriage methods, then specific metadata families for audio control, time code, video payload identification (VPID), acquisition metadata, and live production metadata.
Clause 4 introduces the metadata types and the transport paths. Clauses 5 to 9 then describe the packet formats and data-word layouts used for each metadata family, and Clause 10 closes with the technical context for how the carriage methods fit together.
The report is centered on metadata that is generated at capture time. In practice, that means it is aimed at systems that need to record, transport, or interpret camera-side metadata as the image and sound are being produced.
What are the key requirements of IEC TR 63717:2026?
IEC TR 63717:2026 is mostly a descriptive technical report, but it gives concrete carriage rules and packet structures that implementers need to follow. The most important points are the common packet model, the transport options, and the per-metadata layouts.
Metadata carriage and packet model
Clause 4 says camera metadata is carried as SDI ancillary data packets based on SMPTE ST 291-1. The same ancillary payload can also be transported as an IP stream using SMPTE ST 2110-40 or embedded in a file using SMPTE ST 436-1.
This matters because the same metadata may need to move between live SDI chains, IP production networks, and file exchange. Equipment has to preserve the metadata format while changing the transport path.
Clause 4 also describes the ancillary data packet structure in 10-bit words, including the ancillary data flag (ADF), data identification (DID), data block number (DBN) or secondary data identification (SDID), data count (DC), user data words (UDW), and checksum (CS). Table 2 gives the DID and SDID/DBN pairs used for each metadata content.
Audio control and time code
Clause 5 defines audio control as a Type 1 ancillary data packet. One packet carries one audio group, meaning four channels, and two packets can carry eight channels.
For implementation, that means audio metadata handling is tied to channel grouping. A device that only supports four audio channels may not transmit the second audio group packet.
Clause 5 also defines the user data words for audio frame number, sampling rate, active channels, audio processing delay, and reserved fields. This is the part that lets downstream equipment decode audio correctly and understand timing and processing delay.
Clause 6 covers time code carried as ATC_VITC1, ATC_VITC2, and ATC_LTC. The packet is again Type 1, with DID/SDID 60h/60h and a 10-word payload.
The time code section matters because it shows how frame timing is encoded alongside the video signal. It uses distributed binary bits (DBB) and a structured time-code layout with frame, second, minute, and hour fields.
Video payload identifier
Clause 7 defines VPID as a Type 2 ancillary data packet with DID/SDID 41h/01h and four user data words. The payload ID changes with the digital interface format.
This is important for systems that must identify the video format unambiguously across HD-SDI, 3 Gb/s SDI, 6 Gb/s SDI, and 12 Gb/s SDI. The report gives the payload-ID structure for each interface family, including the variants for transport, picture, colorimetry, sampling structure, and bit depth.
Acquisition metadata set
Clause 8 covers acquisition metadata defined in SMPTE RDD 18. The report identifies three metadata sets: Lens Unit Metadata Set, Camera Unit Metadata Set, and User Defined Acquisition Metadata Set.
This section matters for camera manufacturers and integrators because it shows how lens and camera parameters are carried in an ancillary packet with DID/SDID 43h/05h. It also explains packet sequence count (PSC) when more than 255 user data words are needed, so long metadata sets can be split across consecutive packets.
Clause 8 also states that each metadata set is encoded as a Key-Length-Value (KLV) structure, with metadata items inside a Tag-Length-Value (TLV) structure. That is the key design point for software that parses or generates acquisition metadata.
Live production metadata
Clause 9 covers Live Production Metadata from SMPTE RDD 58. It uses a Type 2 ancillary packet with DID/SDID 53h/01h.
This part is used when production systems need to carry metadata such as HDR and SDR relation data, camera paint data, or video information data. Table 14 gives examples of the live production metadata applications and their identifiers.
What terms does IEC TR 63717:2026 define?
IEC TR 63717:2026 uses a small set of recurring technical terms and abbreviations that are central to the carriage model.
- Serial digital interface (SDI) - the base video transport used for carrying ancillary metadata in this report.
- Ancillary data packet (ANC) - the packet type used to carry metadata alongside video in the SDI space.
- Data identification (DID) - the word that identifies the data format carried in the user data words.
- Secondary data identification (SDID) - the companion identifier used with DID in Type 2 packets.
- User data words (UDW) - the payload words that carry the actual metadata contents.
- Video payload identifier (VPID) - the identifier that describes the video signal format carried in the stream.
- Packet sequence count (PSC) - the first user data word used to number consecutive acquisition metadata packets.
- Key-Length-Value (KLV) - the structure used for a metadata set before the internal items are encoded as Tag-Length-Value.
Who uses IEC TR 63717:2026?
IEC TR 63717:2026 is used by people who design or integrate professional camera workflows. That includes camera manufacturers, broadcast and live production engineers, metadata system designers, and suppliers of SDI, IP, and file-based transport equipment.
It is also relevant to teams that need to preserve camera metadata across production and post-production steps. Typical tasks include encoding ANC packets, decoding time code and audio control data, mapping metadata into IP or MXF-based workflows, and handling acquisition metadata from camera and lens systems.
Which standards are used with IEC TR 63717:2026?
IEC TR 63717:2026 relies on related SMPTE and ITU-R documents for packet formats, payload IDs, and metadata models.
| Standard | What it contributes |
|---|---|
| SMPTE ST 291-1 | Ancillary data packet and space formatting used as the base carriage method |
| SMPTE ST 2110-40 | RTP carriage of SMPTE ST 291-1 ancillary data over IP networks |
| SMPTE ST 436-1 | MXF embedding of ancillary data packets in files |
| SMPTE ST 299-1 | Audio control packet format |
| SMPTE ST 12-2 | Time code carriage in the ancillary data space |
| SMPTE ST 352 | Payload identification codes for serial digital interfaces |
| SMPTE ST 292-1 | HD-SDI payload identification reference |
| SMPTE ST 425-1 | 3 Gb/s SDI payload identification reference |
| SMPTE ST 2081-10 | 6 Gb/s SDI payload mapping |
| SMPTE ST 2082-10 | 12 Gb/s SDI payload mapping |
| SMPTE RDD 18 | Acquisition metadata sets for video camera parameters |
| SMPTE RDD 58 | Live Production Metadata carriage |
| SMPTE ST 336 | KLV encoding used for metadata sets |
| Recommendation ITU-R BT.709 | Colorimetry reference for some payload ID fields |
| Recommendation ITU-R BT.2100 | HDR colorimetry reference |
| Recommendation ITU-R BT.2020 | UHD colorimetry reference |
What does the IEC TR 63717:2026 document contain?
IEC TR 63717:2026 contains packet layouts, identifier tables, and metadata-item lists rather than test methods or conformance rules. It includes figures for the scope, transport methods, ancillary packet formats, and the packet layouts for audio control, time code, VPID, acquisition metadata, and live production metadata.
The tables map camera metadata content to related standards, define DID and SDID/DBN values, and list the user data words for audio control and time code. They also give the payload ID structures for HD-SDI, 3 Gb/s SDI, 6 Gb/s SDI, and 12 Gb/s SDI.
For acquisition metadata, the document lists the items in the Lens Unit Metadata Set, Camera Unit Metadata Set, and User Defined Acquisition Metadata Set. For live production metadata, it gives example content types such as HDR SDR relation, camera paint data, and video information data.
Get Certified
Connect with accredited certification bodies for this standard

ANCE
Mexican certification and testing association.

Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.

LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
IEC TR 63717:2026 is a technical report published by the International Electrotechnical Commission (IEC). Its full title is "Metadata and its carriage for professional cameras". This standard covers: IEC TR 63717:2026 summarizes the results of an investigation into camera metadata obtained by professional-use cameras during shooting and its carriage. When categorizing metadata from a process perspective into capturing, processing, and playout/distribution, the capturing process is within the scope of this document.
IEC TR 63717:2026 summarizes the results of an investigation into camera metadata obtained by professional-use cameras during shooting and its carriage. When categorizing metadata from a process perspective into capturing, processing, and playout/distribution, the capturing process is within the scope of this document.
IEC TR 63717:2026 is classified under the following ICS (International Classification for Standards) categories: 33.160.60 - Multimedia systems and teleconferencing equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
IEC TR 63717:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
IEC TR 63717 ®
Edition 1.0 2026-11
TECHNICAL
REPORT
Metadata and its carriage for professional cameras
ICS 33.160.60 ISBN 978-2-8327-1605-2
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright
or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local
IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Discover our powerful search engine and read freely all the
The advanced search enables to find IEC publications by a
publications previews, graphical symbols and the glossary.
variety of criteria (reference number, text, technical With a subscription you will always have access to up to date
committee, …). It also gives information on projects, content tailored to your needs.
replaced and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published containing more than 22 500 terminological entries in English
details all new publications released. Available online and and French, with equivalent terms in 25 additional languages.
once a month by email. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer
Service Centre: sales@iec.ch.
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Metadata and its carriage. 5
4.1 Contents of camera metadata . 5
4.2 Carriage of camera metadata . 6
4.2.1 General . 6
4.2.2 Carriage via serial digital interface (SDI) . 7
4.2.3 Carriage via Internet Protocol (IP) stream . 8
4.2.4 Carriage as a file . 9
5 Audio control . 9
5.1 General . 9
5.2 Ancillary data packet format . 9
5.3 User Data Words. 10
6 Time code . 10
6.1 General . 10
6.2 Ancillary data packet format . 10
6.3 User data words . 10
6.3.1 Distributed binary bits (DBB) . 10
6.3.2 Time code data . 11
7 Video payload identifier (VPID) . 11
7.1 General . 11
7.2 Ancillary data packet format . 11
7.3 Payload ID . 12
7.3.1 General . 12
7.3.2 HD-SDI . 12
7.3.3 3 Gb/s SDI . 13
7.3.4 6 Gb/s SDI . 15
7.3.5 12 Gb/s SDI . 15
8 Acquisition metadata set . 16
8.1 General . 16
8.2 Ancillary data packet format . 16
8.3 User data words . 16
8.4 Metadata sets . 17
8.4.1 General . 17
8.4.2 Metadata sets defined in SMPTE RDD 18 [8] . 17
9 Live Production Metadata. 19
9.1 General . 19
9.2 Ancillary data packet format . 19
9.3 User data words . 20
9.4 Live Production Metadata. 20
10 Conclusion . 20
Bibliography . 21
Figure 1 – Scope of this document . 5
Figure 2 – Methods for the transmission of metadata . 7
Figure 3 – Ancillary data packet format (Type 1, Type 2) . 7
Figure 4 – RTP packet format (e.g. 2xANC) . 9
Figure 5 – Audio control ancillary data packet . 9
Figure 6 – Time code ancillary data packet . 10
Figure 7 – Video payload identifier ancillary data packet . 12
Figure 8 – Acquisition metadata ancillary data packet . 16
Figure 9 – Live Production Metadata ancillary data packet . 19
Table 1 – Contents of camera metadata and related standard specifications . 6
Table 2 – DID and SDID/DBN for each type of metadata content . 8
Table 3 – User data words of audio control packet . 10
Table 4 – Time code data structure . 11
Table 5 – Payload ID for 720-line Progressive on HD-SDI . 12
Table 6 – Payload ID for 1080-line Interlaced/Progressive on HD-SDI . 13
Table 7 – Payload ID on 3G-SDI Level A . 14
Table 8 – Payload ID on 3G-SDI Level B . 14
Table 9 – Payload ID on 6G-SDI . 15
Table 10 – Payload ID on 12G-SDI . 15
Table 11 – Items of Lens Unit Metadata Set . 17
Table 12 – Items of Camera Unit Metadata Set . 18
Table 13 – Items of User Defined Acquisition Metadata Set . 19
Table 14 – Live Production Metadata examples . 20
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Metadata and its carriage for professional cameras
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC
publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and
Guides (hereafter referred to as "IEC Publication(s)"). Their preparation is entrusted to technical committees; any IEC National
Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the
International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of
opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that
sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot
be held responsible for the way in which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the
maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the
corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its
technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature
whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or
reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for
the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). IEC takes
no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of
publication of this document, IEC had not received notice of (a) patent(s), which may be required to implement this document.
However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent
database available at https://patents.iec.ch. IEC shall not be held responsible for identifying any or all such patent rights.
IEC TR 63717 has been prepared by IEC technical committee 100: Audio, video and multimedia systems
and equipment. It is a Technical Report.
The text of this Technical Report is based on the following documents:
Draft Report on voting
100/4568/DTR 100/4625/RVDTR
Full information on the voting for its approval can be found in the report on voting indicated in the above
table.
The language used for the development of this Technical Report is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in accordance
with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available at
www.iec.ch/members_experts/refdocs. The main document types developed by IEC are described in
greater detail at www.iec.ch/publications.
The committee has decided that the contents of this document will remain unchanged until the stability date
indicated on the IEC website under webstore.iec.ch in the data related to the specific document. At this
date, the document will be
– reconfirmed,
– withdrawn, or
– revised.
1 Scope
This document summarizes the results of an investigation into camera metadata obtained by professional-
use cameras during shooting and its carriage.
When categorizing metadata from a process perspective into capturing, processing, and
playout/distribution, the capturing process is within the scope of this document, see Figure 1.
Figure 1 – Scope of this document
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
– IEC Electropedia: available at https://www.electropedia.org/
– ISO Online browsing platform: available at https://www.iso.org/obp
4 Metadata and its carriage
4.1 Contents of camera metadata
Table 1 summarizes examples of the metadata obtained by professional-use cameras during shooting and
the related standard specifications.
Table 1 – Contents of camera metadata and related standard specifications
Content Reference document
[Clause in this document]
Audio control group 1 SMPTE ST 299-1 [1]
[Clause 4]
Audio control group 2
ATC_VITC SMPTE ST 12-2 [2]
[Clause 5]
VPID SMPTE ST 352 [3] (General)
SMPTE ST 292-1 [4] (HD)
SMPTE ST 425-1 [5] (3G)
SMPTE ST 2081-10 [6] (6G)
SMPTE ST 2082-10 [7] (12G)
[Clause 6]
ATC_LTC SMPTE ST 12-2 [2]
[Clause 5]
Acquisition metadata set SMPTE RDD 18 [8]
[Clause 7]
Live production metadata SMPTE RDD 58 [9]
[Clause 8]
4.2 Carriage of camera metadata
4.2.1 General
As shown in Figure 2, the transmission of metadata uses SDI Ancillary (ANC) data packets specified in
SMPTE ST 291-1 [10]. In reference to this, the method for transporting the ancillary data packet payload
over IP Stream (real-time transport protocol (RTP) payload) is defined in SMPTE ST 2110-40 [11], and the
method for embedding the payload in a file (material exchange format, MXF Data Item) is defined in SMPTE
ST 436-1 [12].
In this document, the description of each content of camera metadata is provided in the format of the
reference definition, SMPTE ST 291-1 [10].
Figure 2 – Methods for the transmission of metadata
4.2.2 Carriage via serial digital interface (SDI)
4.2.2.1 General
The camera metadata described in this document is carried as payload data in the ancillary data packet
defined in SMPTE ST 291-1 [10].
4.2.2.2 Ancillary data packet format
The formats of the ancillary data packets are classified into two types, Type 1 and Type 2, as shown in
Figure 3.
Figure 3 – Ancillary data packet format (Type 1, Type 2)
The ancillary data packet consists of 10-bit words. The first three words are the ancillary data flag (ADF)
that marks the beginning of the packet and have fixed values.
The data identification (DID) word defines the data format carried in user data words (UDW). The ancillary
data packet is categorized by DID into Type 1 (b7=1) and Type 2 (b7=0).
The following word of DID is data block number (DBN) word for Type 1 packets or secondary data
identification (SDID) word for Type 2 packets.
The DBN word distinguishes sequential ancillary data packets when the packets have same DID.
The SDID word, combined with DID word, extends the range of identification.
The DID and SDID/DBN of the camera metadata described in this document are shown in Table 2.
Table 2 – DID and SDID/DBN for each type of metadata content
Content Application DID SDID / DBN
Audio control group 1 E3h 00h
Audio control group 2 E2h 00h
ATC_VITC 60h 60h
VPID 41h 01h
ATC_LTC 60h 60h
Acquisition metadata set 43h 05h
High dynamic range (HDR) and standard dynamic 53h 01h
range (SDR) relation table
Live production metadata
Camera paint data table 53h 02h
Video information data table 53h 03h
The data count (DC) word represents the number of user data words in the ancillary data packet.
For each of the DID, DBN, SDID, and DC words, bit b8 is the even parity of b7 through b0, and b9 is the
inverse of b8. In this document, the b7 to b0 portio
...



