IEC 61935-3:2008
(Main)Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
IEC 61935-3:2008 specifies conformance testing for home cabling. These conformance tests include visual inspection, verification testing and either qualification testing or certification testing. Documentation for the test results are also specified.
Essais des câblages de technologies de l'information symétriques et coaxiaux - Partie 3: Câblages installés selon les spécifications de l'ISO/IEC 15018 et des normes connexes
La CEI 61935:2008 specifies conformance testing for home cabling. These conformance tests include visual inspection, verification testing and either qualification testing or certification testing. Documentation for the test results are also specified.
General Information
Buy Standard
Standards Content (Sample)
IEC 61935-3
Edition 1.0 2008-03
INTERNATIONAL
STANDARD
Testing of balanced and coaxial information technology cabling –
Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61935-3
Edition 1.0 2008-03
INTERNATIONAL
STANDARD
Testing of balanced and coaxial information technology cabling –
Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
M
ICS 33.120.20 ISBN 2-8318-9618-5
– 2 – 61935-3 © IEC:2008(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 Home cabling conformance .7
4.1 Applications to be supported .7
4.2 General .7
4.3 Visual inspection .7
4.4 Verification .7
5 Qualification and certification testing .8
5.1 General .8
5.2 Qualification testing.8
5.3 Certification testing .8
5.4 Documentation .8
6 Qualification field test instrument.9
6.1 General .9
6.2 Cabling configurations tested .9
6.3 Qualification field test parameters .9
6.3.1 Wire map.9
6.3.2 Length .10
6.3.3 Qualification test.10
6.3.4 Test results summary documentation.11
Figure 1 – Correct pairing .9
Figure 2 – Incorrect pairing .10
61935-3 © IEC:2008(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
______________
TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY
CABLING –
Part 3: Installed cabling as specified in ISO/IEC 15018 and related
standards
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61935-3 has been prepared by IEC technical committee 46:
Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and
accessories.
The text of this standard is based on the following documents:
FDIS Report on voting
46/261/FDIS 46/268/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – 61935-3 © IEC:2008(E)
A list of all the parts of the IEC 61935 series, under the general title Testing of balanced and
coaxial information technology cabling, can be found on the IEC website.
Future standards in this series will carry the new general title as cited above.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
61935-3 © IEC:2008(E) – 5 –
INTRODUCTION
Telecommunication cabling for homes has evolved into the specification and deployment of
generic cabling. This generic cabling system for homes is specified within ISO/IEC 15018.
Formerly, there had been no test requirement for home cabling. Connectivity tests and visual
inspection were, at best, random and insufficient. However, bandwidth requirements of the
home applications are ever increasing and home-owners need assurance that their generic
cabling will indeed support intended network technologies that are delivered to the home and
distributed throughout the home. This part of IEC 61935 addresses both verification and
qualification of home cabling.
– 6 – 61935-3 © IEC:2008(E)
TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY
CABLING –
Part 3: Installed cabling as specified in ISO/IEC 15018 and related
standards
1 Scope
This part of IEC 61935 specifies conformance testing for home cabling. These conformance
tests include visual inspection, verification testing and either qualification testing or
certification testing. Documentation for the test results are also specified.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60728-1, Cable networks for television signals, sound signals and interactive services –
Part 1: System performance of forward paths
IEC 60728-12, Cabled distribution systems for television and sound signals – Part 12:
Electromagnetic compatibility of systems
ISO/IEC 11801, Information technology – Generic cabling for customer premises
ISO/IEC 15018, Information technology – Generic cabling for homes
3 Terms and definitions
For the purposes of this document, the following definitions apply.
3.1
certification
measurements of installed cabling specified in ISO/IEC 11801 (e.g., class D, class E,
class F); this requires field testers with traceable accuracy to national standards
3.2
qualification
measurements of installed cabling for specific network technologies (e.g., 100BASE-T,
1000BASE-T, IEEE 1394b ): the measurement accuracy of field testers is not traceable to
national standards
3.3
verification
measurements of installed cable or cabling for continuity; no other transmission performance
parameters other than connectivity are measured
—————————
IEEE 1394b: 2002, High Performance Serial Bus (High Speed Supplement
61935-3 © IEC:2008(E) – 7 –
4 Home cabling conformance
4.1 Applications to be supported
Applications that may be supported in home cabling are:
– ICT: such as 10, 100 1000BASE-T, IEEE 1394 being the most popular;
– analog telephone, ISDN and DSL applications;
– BCT: VHF/UHF TV signals (up to 862 MHz), FM radio signals;
– satellite TV signals, CCTV;
– control applications.
4.2 General
Telecommunications cabling (e.g., voice, data, video, security, audio, control) can be
damaged during the construction phases of rough-in, drywall installation, and even during the
siding of the exterior. Many of these damaging faults result from causes such as nails and
staples penetrating the cable, severe kinks in the cable where the cable was pulled through a
drilled hole in a stud or joist, or a cable tear where the cable sheath and conductors are
damaged from pulling the cable. For these reasons, telecommunications cabling shall yield to
a process to ensure conformance. This process includes:
a) visual examination of the cabling;
b) verification testing of the cabling;
c) qualification testing or certification testing of the cabling, and
d) producing a documented report of results.
...
IEC 61935-3 ®
Edition 1.0 2008-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Testing of balanced and coaxial information technology cabling –
Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
Essais des câblages de technologies de l’information symétriques et coaxiaux –
Partie 3: Câblages installés selon les spécifications de l’ISO/CEI 15018 et des
normes connexes
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61935-3 ®
Edition 1.0 2008-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Testing of balanced and coaxial information technology cabling –
Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
Essais des câblages de technologies de l’information symétriques et coaxiaux –
Partie 3: Câblages installés selon les spécifications de l’ISO/CEI 15018 et des
normes connexes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
M
CODE PRIX
ICS 33.120.20 ISBN 978-2-88910-590-8
– 2 – 61935-3 © IEC:2008
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 Home cabling conformance .7
4.1 Applications to be supported .7
4.2 General .7
4.3 Visual inspection .7
4.4 Verification .7
5 Qualification and certification testing .8
5.1 General .8
5.2 Qualification testing.8
5.3 Certification testing .8
5.4 Documentation .8
6 Qualification field test instrument.9
6.1 General .9
6.2 Cabling configurations tested .9
6.3 Qualification field test parameters .9
6.3.1 Wire map.9
6.3.2 Length .10
6.3.3 Qualification test.10
6.3.4 Test results summary documentation.11
Figure 1 – Correct pairing .9
Figure 2 – Incorrect pairing .10
61935-3 © IEC:2008 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
______________
TESTING OF BALANCED AND COAXIAL
INFORMATION TECHNOLOGY CABLING –
Part 3: Installed cabling as specified
in ISO/IEC 15018 and related standards
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61935-3 has been prepared by IEC technical committee 46:
Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and
accessories.
This bilingual version, published in 2009-04, corresponds to the English version.
The text of this standard is based on the following documents:
FDIS Report on voting
46/261/FDIS 46/268/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
– 4 – 61935-3 © IEC:2008
The French version of this standard has not been voted upon.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts of the IEC 61935 series, under the general title Testing of balanced and
coaxial information technology cabling, can be found on the IEC website.
Future standards in this series will carry the new general title as cited above.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61935-3 © IEC:2008 – 5 –
INTRODUCTION
Telecommunication cabling for homes has evolved into the specification and deployment of
generic cabling. This generic cabling system for homes is specified within ISO/IEC 15018.
Formerly, there had been no test requirement for home cabling. Connectivity tests and visual
inspection were, at best, random and insufficient. However, bandwidth requirements of the
home applications are ever increasing and home-owners need assurance that their generic
cabling will indeed support intended network technologies that are delivered to the home and
distributed throughout the home. This part of IEC 61935 addresses both verification and
qualification of home cabling.
– 6 – 61935-3 © IEC:2008
TESTING OF BALANCED AND COAXIAL
INFORMATION TECHNOLOGY CABLING –
Part 3: Installed cabling as specified
in ISO/IEC 15018 and related standards
1 Scope
This part of IEC 61935 specifies conformance testing for home cabling. These conformance
tests include visual inspection, verification testing and either qualification testing or
certification testing. Documentation for the test results are also specified.
2 Normative references
The foll
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.