IEC 60454-3-12:2006

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive

IEC 60454-3-12:2006 contains requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesives. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application, and not based on this specification alone. This second edition of IEC 60454-3-12 replaces the first edition, published in 1998, as well as IEC 60454-3-18, published in 2003. It constitutes a technical revision. This edition replaces the previous second edition and includes its consolidation with the texts of IEC 60464-3-18 (2003). Keywords: for polyethylene and polypropylene film tapes, pressure sensitive adhesives

Rubans adhésifs sensibles à la pression pour usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 12: Exigences relatives aux rubans en polyéthylène et en polypropylène avec un adhésif sensible à la pression

IEC 60454-3-12:2006 contient les exigences pour les rubans en polyéthylène et polypropylène avec des adhésifs sensibles à la pression. Les matériaux conformes à cette spécification satisfont à des niveaux établis de performance. Cependant, il convient que le choix d'un matériau par un utilisateur et pour une application particulière soit fondé sur les exigences réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et non sur cette seule spécification. Cette deuxième édition de la CEI 60454-3-12 remplace la première édition publiée en 1998 ainsi que la CEI 60454-3-18 publiée en 2003. Elle constitue une révision technique. La présente édition remplace la précédente deuxième édition et son contenu est consolidé avec le texte de la CEI 604564-3-18 (2003). Mots clés: rubans en polyéthylène et polypropylene, adhésifs sensibles à la pression

General Information

• Status: Published
• Publication Date: 22-Jan-2006
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: TC 15 - Solid electrical insulating materials
• Drafting Committee: MT 16 - TC 15/MT 16
• Current Stage: PPUB - Publication issued
• Start Date: 15-Jun-2006
• Completion Date: 23-Jan-2006

Relations

• Replaces: IEC 60454-3-18:2003 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 18: Polypropylene film tapes with pressure-sensitive adhesive
• Effective Date: 05-Sep-2023
• Revises: IEC 60454-3-12:1998 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Polyethylene film tapes with pressure-sensitive adhesive
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 60454-3-12
Second edition
2006-01
Pressure-sensitive adhesive tapes
for electrical purposes –
Part 3:
Specifications for individual materials –
Sheet 12: Requirements for polyethylene
and polypropylene film tapes
with pressure sensitive adhesive
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 60454-3-12
Second edition
2006-01
Pressure-sensitive adhesive tapes
for electrical purposes –
Part 3:
Specifications for individual materials –
Sheet 12: Requirements for polyethylene
and polypropylene film tapes
with pressure sensitive adhesive

 IEC 2006  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale J
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60454-3-12  IEC:2006(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
PRESSURE-SENSITIVE ADHESIVE TAPES
FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials –
Sheet 12: Requirements for polyethylene and polypropylene
film tapes with pressure sensitive adhesive

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60454-3-12 has been prepared by IEC technical committee 15:
Insulating materials.
This second edition of IEC 60454-3-12 replaces the first edition, published in 1998, as well as
IEC 60454-3-18, published in 2003. It constitutes a technical revision. This edition replaces
the previous second edition and includes its consolidation with the texts of IEC 60454-3-18
(2003).
The text of this standard is based on the following documents:
FDIS Report on voting
15/261/FDIS 15/288/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

60454-3-12  IEC:2006(E) – 3 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

– 4 – 60454-3-12  IEC:2006(E)
INTRODUTION
This International Standard is one of a series, which deals with pressure-sensitive adhesive
tapes, intended primarily for electrical purposes.
The series consists of three parts:
Part 1: General requirements (IEC 60454-1)
Part 2: Methods of test (IEC 60454-2)
Part 3: Specifications for individual materials (IEC 60454-3)
This standard contains one of the sheets comprising part 3 as follows:
Sheet 12:
Polyethylene and polypropylene film tapes pressure sensitive adhesives.

SAFETY WARNING
It is the responsibility of the user of the methods contained or referred to in this standard to
ensur
...

IEC 60454-3-12 ®
Edition 2.0 2006-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Pressure-sensitive adhesive tapes for electrical purposes –
Part 3: Specifications for individual materials –
Sheet 12: Requirements for polyethylene and polypropylene film tapes with
pressure sensitive adhesive
Rubans adhésifs sensibles à la pression pour usages électriques –
Partie 3: Spécifications pour matériaux particuliers –
Feuille 12: Exigences relatives aux rubans en polyéthylène et en polypropylène
avec un adhésif sensible à la pression

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 55 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 60454-3-12 ®
Edition 2.0 2006-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Pressure-sensitive adhesive tapes for electrical purposes –

Part 3: Specifications for individual materials –

Sheet 12: Requirements for polyethylene and polypropylene film tapes with

pressure sensitive adhesive
Rubans adhésifs sensibles à la pression pour usages électriques –

Partie 3: Spécifications pour matériaux particuliers –

Feuille 12: Exigences relatives aux rubans en polyéthylène et en polypropylène

avec un adhésif sensible à la pression

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX J
ICS 29.035.20 ISBN 978-2-8322-1593-7

– 2 – IEC 60454-3-12:2006 © IEC 2006
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
PRESSURE-SENSITIVE ADHESIVE TAPES
FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials –
Sheet 12: Requirements for polyethylene and polypropylene
film tapes with pressure sensitive adhesive

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60454-3-12 has been prepared by IEC technical committee 15:
Insulating materials.
This bilingual version (2014-05) corresponds to the English version, published in 2006-01.
This second edition of IEC 60454-3-12 replaces the first edition, published in 1998, as well as
IEC 60454-3-18, published in 2003. It constitutes a technical revision. This edition replaces
the previous second edition and includes its consolidation with the texts of IEC 60464-3-18
(2003).
The text of this standard is based on the following documents:
FDIS Report on voting
15/261/FDIS 15/288/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The French version of this standard has not been voted upon.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
– 4 – IEC 60454-3-12:2006 © IEC 2006
INTRODUCTION
This International Standard is one of a series, which deals with pressure-sensitive adhesive
tapes, intended primarily for electrical purposes.
The series consists of three parts:
Part 1: General requirements (IEC 60454-1)
Part 2: Methods of test (IEC 60454-2)
Part 3: Specifications for individual materials (IEC 60454-3)
This standard contains one of the sheets comprising part 3 as follows:
Sheet 12:
Polyethylene and polypropylene film tapes pressure sensitive adhesives.

SAFETY WARNING
It is the responsibility of the user of the methods contained or referred to in this standard to
ensure that they are used in a safe manner.

PRESSURE-SENSITIVE ADHESIVE TAPES
FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials –
Sheet 12: Requirements for polyethylene and polypropylene
film tapes with pressure sensitive adhesive

1 Scope
This sheet of IEC 60454-3 contains requirements for polyethylene and polypropylene film
tapes with pressure sensitive adhesives
Materials which conform to this specification meet established levels of performance.
However, the selection of a material by a user for a specific application should be based on
the actual requirements necessary for adequate performance in that application, and not
based on this specification alone.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60426:1973, Test methods for determining electrolytic corrosion with insulating materials
IEC 60454-1:1992, Specifications for pressure-sensitive adhesive tapes for electrical
purposes – Part 1: General requirements
IEC 60454-2:1994, Specifications for pressure-sensitive adhesive tapes for electrical
purposes – Part 2: Methods of test
3 Terms and definitions
For the purposes of this document, the definitions of IEC 60454-1 apply.
4 Classification and designation
4.1 Polyethylene film tapes with pressure sensitive adhesive
4.1.1 The products supplied according to this specification shall be classified as follows:
Type 1: Products having a thermal index of 90 and a minimum temperature rating of –10 °C.
Type 2: Products having a thermal index of 90 and a minimum temperature rating of –18 °C.
Type 3: Products having a thermal index of 90 and a minimum temperature rating of –33 °C.
Type 4: Products having a thermal index of 75 and a minimum temperature rating of –10 °C.
Type 5: Products having a thermal index of 75 and a minimum temperature rating of –18 °C.
Type 6: Prod
...