IEC 60749-21:2011

Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability

IEC 60749-21:2011 establishes a standard procedure for determining the solderability of device package terminations that are intended to be joined to another surface using tin-lead (SnPb) or lead-free (Pb-free) solder for the attachment. This test method provides a procedure for 'dip and look' solderability testing of through hole, axial and surface mount devices (SMDs) as well as an optional procedure for a board mounting solderability test for SMDs for the purpose of allowing simulation of the soldering process to be used in the device application. The test method also provides optional conditions for ageing. This test is considered destructive unless otherwise detailed in the relevant specification.
NOTE 1 This test method is in general accord with IEC 60068, but due to specific requirements of semiconductors, the following text is applied.
NOTE 2 This test method does not assess the effect of thermal stresses which may occur during the soldering process. Reference should be made IEC 60749-15 or IEC 60749-20.
This standard cancels and replaces the first edition published in 2004 and constitutes a technical revision. The significant change is the inclusion of Pb (lead)-free backward compatibility.

Dispositifs à semiconducteur - Méthodes d'essai mécaniques et climatiques - Partie 21: Brasabilité

La CEI 60749-21:2011 établit une procédure normalisée pour déterminer la brasabilité des sorties des boîtiers de dispositifs qui sont destinées à être fixées sur une autre surface en utilisant de la brasure étain-plomb (SnPb) ou sans-plomb pour réaliser cette fixation. Cette méthode d'essai décrit une procédure pour les essais de brasabilité par "immersion puis examen visuel" des dispositifs à montage en surface (CMS) par trous traversants, axial et en surface, ainsi qu'une procédure optionnelle d'essai de brasabilité pour des CMS pour montage en surface sur carte afin de permettre la simulation du processus de brasage devant être utilisé dans l'application du dispositif. La méthode d'essai fournit également des conditions optionnelles pour le vieillissement. Cet essai est considéré comme destructif sauf indication contraire dans la spécification applicable.
NOTE 1 Cette méthode d'essai est en accord général avec la CEI 60068, mais c'est le texte ci-dessous qui s'applique compte tenu des exigences spécifiques que présentent les semiconducteurs.
NOTE 2 Cette méthode d'essai ne prend pas en compte l'effet des contraintes thermiques qui peuvent se produire pendant la procédure de brasage. Il convient de faire référence à la CEI 60749-15 ou à la CEI 60749-20.
La présente norme annule et remplace la première édition publiée en 2004 et constitue une révision technique. La modification importante qui a été apportée est l'ajout de la compatibilité descendante de la brasure sans plomb (Pb).

General Information

• Status: Published
• Publication Date: 06-Apr-2011
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 31.080.01 - Semiconductor devices in general
• Technical Committee: TC 47 - Semiconductor devices
• Drafting Committee: WG 2 - TC 47/WG 2
• Current Stage: PPUB - Publication issued
• Start Date: 30-Apr-2011
• Completion Date: 07-Apr-2011

Relations

• Revises: IEC 60749-21:2004 - Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60749-21 ®
Edition 2.0 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Semiconductor devices – Mechanical and climatic test methods –
Part 21: Solderability
Dispositifs à semiconducteur – Méthodes d’essai mécaniques et climatiques –
Partie 21: Brasabilité
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 60749-21 ®
Edition 2.0 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Semiconductor devices – Mechanical and climatic test methods –
Part 21: Solderability
Dispositifs à semiconducteur – Méthodes d’essai mécaniques et climatiques –
Partie 21: Brasabilité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX S
ICS 31.080.01 ISBN 978-2-88912-433-6

– 2 – 60749-21  IEC:2011
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Test apparatus . 6
3.1 Solder bath. 6
3.2 Dipping device. 6
3.3 Optical equipment . 7
3.4 Steam ageing equipment . 7
3.5 Lighting equipment . 7
3.6 Materials . 7
3.6.1 Flux . 7
3.6.2 Solder . 7
3.7 SMD reflow equipment . 8
3.7.1 Stencil or screen . 8
3.7.2 Rubber squeegee or metal spatula . 8
3.7.3 Test substrate . 8
3.7.4 Solder paste . 9
3.7.5 Reflow equipment . 9
3.7.6 Flux removal solvent . 9
4 Procedure . 9
4.1 Lead-free backward compatibility . 9
4.2 Preconditioning . 10
4.2.1 General . 10
4.2.2 Preconditioning by steam ageing . 10
4.2.3 Preconditioning by high temperature storage . 11
4.3 Procedure for dip and look solderability testing . 11
4.3.1 General . 11
4.3.2 Solder dip conditions . 11
4.3.3 Procedure . 11
4.4 Procedure for simulated board mounting reflow solderability testing of SMDs . 19
4.4.1 General . 19
4.4.2 Test equipment set-up . 19
4.4.3 Specimen preparation and surface condition . 20
4.4.4 Visual inspection . 21
5 Summary . 21
Bibliography . 22

Figure 1 – Areas to be inspected for gullwing packages . 15
Figure 2 – Areas to be inspected for J-lead packages . 16
Figure 3 – Areas to be inspected in rectangular components (SMD method) . 17
Figure 4 – Areas to be inspected in SOIC and QFP packages (SMD method) . 18
Figure 5 – Flat peak type reflow profile . 20

Table 1 – Steam ageing conditions . 10
Table 2 – Altitude versus steam temperature . 10

60749-21  IEC:2011 – 3 –
Table 3 – Solder dip test conditions . 11
Table 4 – Maximum limits of solder bath contaminant . 13

– 4 – 60749-21  IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DEVICES –
MECHANICAL AND CLIMATIC TEST METHODS –

Part 21: Solderability
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60749-21 has been prepared by IEC technical committee 47:
Semiconductor devices.
This standard cancels and replaces the first edition published in 2004 and constitutes a
technical revision. The significant change is the inclusion of Pb (lead)–free backward
compatibility.
The text of this standard is based on the following documents:
FDIS Report on voting
47/2082/FDIS 47/2089/RVD
Full information on the voting for the approval of this standard can be found in the report on
...