IEC 60895:2002/COR1:2003
(Corrigendum)Corrigendum 1 - Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c.
Corrigendum 1 - Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c.
Corrigendum 1 - Travaux sous tension - Vêtements conducteurs pour usage jusqu'à 800 kV de tension nominale en courant alternatif et +/- 600 kV en courant continu
General Information
Relations
Standards Content (Sample)
CEI 60895 IEC 60895
(Deuxième édition – 2002-08) (Second edition – 2002-08)
Travaux sous tension – Live working –
Vêtements conducteurs pour usage Conductive clothing for use at nominal
jusqu’à 800 kV de tension nominale en voltage up to 800 kV a.c. and
courant alternatif et ±600 kV d.c.
±600 kV en
...
This May Also Interest You
IEC 60895:2020 is applicable to conductive clothing, worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a reduction of electric field inside the clothing.
This document is applicable to conductive clothing assembled from a conductive garment (jackets and trousers or coveralls forming a one-piece garment) and from conductive component parts (gloves, hoods or helmets, shoes or boots, overshoe socks and socks) in electrical systems with nominal voltage up to 1 000 kV AC and up to ±800 kV DC.
This document does not indicate values of protection from the effects of the electric arc, because any value indicated would not guarantee the necessary protection from the effects of electric arcs, or the operator would need to wear very heavy and rigid conductive clothing, which would not allow the execution of the work in safety.
The products designed and manufactured according to this document contribute to the safety of the users provided they are used by persons trained for the work, in accordance with the live working methods and the instructions for use.
This third edition cancels and replaces the second edition, published in 2002. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) increase of the use up to 1 000 kV AC and ±800 kV DC;
b) introduction of two classes of conductive clothing with different electrical requirements;
c) revision of the electrical requirements of conductive clothing;
d) definition of specific resistance values for each component part of the conductive clothing;
e) introduction of conductive helmet and conductive scarf as component parts of conductive clothing;
f) introduction of mechanical requirements and new tests for fabrics;
g) update of the cleaning test procedures;
h) revision of the efficiency test of the conductive clothing to improve the feasibility and repeatability;
i) preparation of the elements of classification of defects, and general application of IEC 61318:2007;
j) the normative Annex B for the classification of tests has been replaced by normative Annex C for the general type tests procedure, the normative Annex D for the classification of defects and the informative Annex E providing the justification for the classification of defects;
k) the normative Annex C on sampling procedure has been deleted (not applicable according to IEC 61318:2007);
l) modification of the recommended frequency of the periodic tests.
- Standard139 pagesEnglish and French languagesale 15% off
IEC 60855-1:2016 is applicable to insulating foam-filled tubes and solid rods, of a circular cross-section, made of synthetic materials with reinforced fibreglass and intended to be used in the manufacture and construction of tools, devices and equipment for carrying out live working on electrical systems operating at voltages above 1 kV. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision.
- Standard65 pagesEnglish and French languagesale 15% off
IEC 60855-1:2009 is applicable to insulating foam-filled tubes and solid rods, of a circular cross-section, made of synthetic materials and intended to be used for the manufacture and construction of tools and equipment for carrying out live work on electrical systems operating at voltages above 1 kV. Tubes and rods of cross-section other than circular are not covered by this part of IEC 60855. This first edition of IEC 60855-1 cancels and replaces the first edition of IEC 60855 published in 1985; and constitutes a technical revision. Technical committee 78 is considering the preparation of IEC 60855-2, which would cover tubes and rods of cross-section other than circular.
- Standard62 pagesEnglish and French languagesale 15% off
Applicable to conductive clothing, either assembled from component parts or forming a single complete clothing, worn by (electrically) skilled persons during live working (especially bare-hand working) at a nominal power system voltage up to 800 kV a.c. and ±600 kV d.c. It is applicable to conductive jackets, trousers, coveralls (one-piece clothing), gloves or mitts, hoods, shoes, overshoe socks and socks. The main changes with respect to the previous edition are listed below: - the scope has been extended to cover the use of conductive clothing to ±600 kV d.c.; - revision of the electrical resistance requirements of the fabrics used in conductive clothing; - revision of the testing procedures for complete clothing. The contents of the corrigendum of February 2003 habe been included in this copy.
- Standard79 pagesEnglish and French languagesale 15% off
- Standard3 pagesEnglish and French languagesale 15% off
IEC 60895:2020 is applicable to conductive clothing, worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a reduction of electric field inside the clothing.
This document is applicable to conductive clothing assembled from a conductive garment (jackets and trousers or coveralls forming a one-piece garment) and from conductive component parts (gloves, hoods or helmets, shoes or boots, overshoe socks and socks) in electrical systems with nominal voltage up to 1 000 kV AC and up to ±800 kV DC.
This document does not indicate values of protection from the effects of the electric arc, because any value indicated would not guarantee the necessary protection from the effects of electric arcs, or the operator would need to wear very heavy and rigid conductive clothing, which would not allow the execution of the work in safety.
The products designed and manufactured according to this document contribute to the safety of the users provided they are used by persons trained for the work, in accordance with the live working methods and the instructions for use.
This third edition cancels and replaces the second edition, published in 2002. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) increase of the use up to 1 000 kV AC and ±800 kV DC;
b) introduction of two classes of conductive clothing with different electrical requirements;
c) revision of the electrical requirements of conductive clothing;
d) definition of specific resistance values for each component part of the conductive clothing;
e) introduction of conductive helmet and conductive scarf as component parts of conductive clothing;
f) introduction of mechanical requirements and new tests for fabrics;
g) update of the cleaning test procedures;
h) revision of the efficiency test of the conductive clothing to improve the feasibility and repeatability;
i) preparation of the elements of classification of defects, and general application of IEC 61318:2007;
j) the normative Annex B for the classification of tests has been replaced by normative Annex C for the general type tests procedure, the normative Annex D for the classification of defects and the informative Annex E providing the justification for the classification of defects;
k) the normative Annex C on sampling procedure has been deleted (not applicable according to IEC 61318:2007);
l) modification of the recommended frequency of the periodic tests.
- Standard139 pagesEnglish and French languagesale 15% off
IEC 60855-1:2016 is applicable to insulating foam-filled tubes and solid rods, of a circular cross-section, made of synthetic materials with reinforced fibreglass and intended to be used in the manufacture and construction of tools, devices and equipment for carrying out live working on electrical systems operating at voltages above 1 kV. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision.
- Standard65 pagesEnglish and French languagesale 15% off
IEC 60855-1:2009 is applicable to insulating foam-filled tubes and solid rods, of a circular cross-section, made of synthetic materials and intended to be used for the manufacture and construction of tools and equipment for carrying out live work on electrical systems operating at voltages above 1 kV. Tubes and rods of cross-section other than circular are not covered by this part of IEC 60855. This first edition of IEC 60855-1 cancels and replaces the first edition of IEC 60855 published in 1985; and constitutes a technical revision. Technical committee 78 is considering the preparation of IEC 60855-2, which would cover tubes and rods of cross-section other than circular.
- Standard62 pagesEnglish and French languagesale 15% off
Applicable to conductive clothing, either assembled from component parts or forming a single complete clothing, worn by (electrically) skilled persons during live working (especially bare-hand working) at a nominal power system voltage up to 800 kV a.c. and ±600 kV d.c. It is applicable to conductive jackets, trousers, coveralls (one-piece clothing), gloves or mitts, hoods, shoes, overshoe socks and socks. The main changes with respect to the previous edition are listed below: - the scope has been extended to cover the use of conductive clothing to ±600 kV d.c.; - revision of the electrical resistance requirements of the fabrics used in conductive clothing; - revision of the testing procedures for complete clothing. The contents of the corrigendum of February 2003 habe been included in this copy.
- Standard79 pagesEnglish and French languagesale 15% off
- Standard3 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.