IEC 62819:2022/COR1:2024
(Corrigendum)Corrigendum 1 - Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods
Corrigendum 1 - Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods
Corrigendum 1 - Travaux sous tension - Protecteurs des yeux, du visage et de la tête contre les effets de l'arc électrique - Exigences de performances et méthodes d'essai
General Information
Relations
Standards Content (Sample)
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 62819 IEC 62819
Edition 1.0 2022-09 Édition 1.0 2022-09
LIVE WORKING – EYE, FACE AND HEAD TRAVAUX SOUS TENSION – PROTECTEURS
PROTECTORS AGAINST THE EFFECTS OF DES YEUX, DU VISAGE ET DE LA TÊTE
ELECTRIC ARC – PERFORMANCE CONTRE LES EFFETS DE L’ARC
REQUIREMENTS AND TEST METHODS ÉLECTRIQUE – EXIGENCES DE
PERFORMANCES ET MÉTHODES D'ESSAI
CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.
4.3.1.3 Area to be protected
4.3.1.3.1 General requirements
Replace the paragraph and NOTES after Figure 1 with the following new text:
Figure 1 shows the reference points of standard head forms in accordance with
ISO 16321-1:2021, 7.1.1, Figure 4, modified by addition of reference points 'I' and 'J' and the
distance 'k', where
– 'k' shall be minimum 150 mm, modified to ISO 16321-1:2021, 7.1.1, Figure 4, Table 14.
– IJ shall be minimum 'a' + 80 mm in accordance with ISO 16321-1:2021, 7.1.1, Figure 4,
Table 14.
NOTE 1 The 80 mm value is the average value of ISO 18526-4:2020, 4.1,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.