IEC 63267-1:2023

Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 1: Enhanced macro bend loss multimode 50 µm core diameter fibres - General and guidance

IEC 63267-1: 2023 covers enhanced macrobend loss 50 µm core diameter multimode fibre optic connection interfaces. It includes references, document structure details, definitions, and standardised optical connection grades. The grades are based on random mated connections between two optical connector populations according to prescribed characteristics including the core diameter and numerical aperture mismatches. This document describes the rules under which an optical interface is created. It also defines standardised test methods where appropriate.

Dispositifs d'interconnexion et composants passifs fibroniques – Interfaces optiques de connecteurs fibroniques - Partie 1: Fibres multimodales de diamètre de coeur de 50 μm à performances améliorées en matière de pertes par macrocourbures – Généralités et recommandations

IEC 63267-1:2023 couvre les interfaces de connexion fibroniques multimodales de diamètre de cœur de 50 µm à performances améliorées en matière de pertes par macrocourbures. Elle comprend les références, les détails de la structure du document, les définitions et les classes normalisées de connexion optique. Les classes sont fondées sur des connexions accouplées sans choix préalable entre deux populations de connecteurs optiques selon des caractéristiques exigées, notamment le diamètre du cœur et les défauts d'adaptation d'ouverture numérique. Le présent document décrit les règles qui régissent la création d'une interface optique. Il définit également les méthodes d'essais normalisées, le cas échéant.

General Information

• Status: Published
• Publication Date: 10-May-2023
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: SC 86B - Fibre optic interconnecting devices and passive components
• Current Stage: PPUB - Publication issued
• Start Date: 02-Dec-2022
• Completion Date: 11-May-2023

Standards Content (Sample)

IEC 63267-1 ®
Edition 1.0 2023-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – fibre optic
connector optical interfaces –
Part 1: Enhanced macro bend loss multimode 50 μm core diameter fibres –
General and guidance
Dispositifs d'interconnexion et composants passifs fibroniques – Interfaces
optiques de connecteurs fibroniques –
Partie 1: Fibres multimodales de diamètre de cœur de 50 μm à performances
améliorées en matière de pertes par macrocourbures – Généralités et
recommandations
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org

Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 300 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 19 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.

Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC Products & Services Portal - products.iec.ch

IEC 63267-1 ®
Edition 1.0 2023-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – fibre optic

connector optical interfaces –

Part 1: Enhanced macro bend loss multimode 50 μm core diameter fibres –

General and guidance
Dispositifs d'interconnexion et composants passifs fibroniques – Interfaces

optiques de connecteurs fibroniques –

Partie 1: Fibres multimodales de diamètre de cœur de 50 μm à performances

améliorées en matière de pertes par macrocourbures – Généralités et

recommandations
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-6016-6

– 2 – IEC 63267-1:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
0.1 Overview. 5
0.2 Hierarchical relationship . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Document structure . 9
5 Optical datum target . 10
6 Test methods . 11
7 Optical interface grades . 11
8 Key parameters . 12
9 Materials . 12
Bibliography . 13

Figure 1 – Relationship between optical interface standards and interface standards. 6

Table 1 – Multi-part document structure . 10
Table 2 – Multimode attenuation grades at 850 nm . 11
Table 3 – Multimode return loss at 850 nm for physically contacting ferrule designs . 11

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE
COMPONENTS – FIBRE OPTIC CONNECTOR OPTICAL INTERFACES –

Part 1: Enhanced macro bend loss multimode 50 μm core
diameter fibres – General and guidance

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 63267-1 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and
passive components, of IEC technical committee 86: Fibre optics. It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
86B/4657/FDIS 86B/4676/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.

– 4 – IEC 63267-1:2023 © IEC 2023
A list of all parts of the IEC 63267 series, under the general title Fibre optic interconnecting
devices and passive components – Fibre optic connector optical interfaces, can be found on
the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
INTRODUCTION
0.1 Overview
A connector optical interface standard is a multi-part collection of the geometric, dimensional
and material requirements necessary in order to comply with the optical functionality
specifications for a defined interface between two optical fibres. It consists of those essential
features that are functionally critical to the optical attenuation and return loss performance of
an optical interface in the mated condition.
The IEC 63267 series is composed of optical interface standards for multimode connectivity
which provide general information on optical connector interfaces for IEC 60793-2-10,
subcategory A1-OM2b to A1-OM5b multimode fibre, at 850 nm band only.
The IEC 63267 series defines the location of the fibre core in relation to the datum target and
the following key parameters: lateral and angular misalignment, core diameter, numer
...