IEC 63510-2:2025

Household appliances network and grid connectivity - Part 2: Product specific mappings, details, requirements and deviations

IEC 63510-2:2025 maps the generic use cases, use case functions, and generic data definitions to categories of appliances (e.g. washer, dishwasher, water heater, HVAC devices) as well as any necessary appliance-specific details and deviations.
This document is part of the IEC 63510 series, which defines the information exchange between Smart Appliances and management systems in homes and buildings including energy management.

Appareils domestiques connectés au réseau et réseau intelligent - Partie 2: Mappings spécifiques aux produits, détails, exigences et déviations

General Information

• Status: Published
• Publication Date: 09-Jun-2025
• ICS: 97.120 - Automatic controls for household use
• Technical Committee: TC 59 - Performance of household and similar electrical appliances
• Drafting Committee: WG 15 - TC 59/WG 15
• Current Stage: PPUB - Publication issued
• Start Date: 10-Jun-2025
• Completion Date: 07-Jul-2025

Standards Content (Sample)

IEC 63510-2 ®
Edition 1.0 2025-06
INTERNATIONAL
STANDARD
Household appliances network and grid connectivity –
Part 2: Product specific mappings, details, requirements and deviations
ICS 97.120  ISBN 978-2-8327-0472-1

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright
or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local
IEC member National Committee for further information.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Discover our powerful search engine and read freely all the
The advanced search enables to find IEC publications by a publications previews, graphical symbols and the glossary.
variety of criteria (reference number, text, technical With a subscription you will always have access to up to date
committee, …). It also gives information on projects, content tailored to your needs.
replaced and withdrawn publications.
Electropedia - www.electropedia.org
The world's leading online dictionary on electrotechnology,
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published containing more than 22 500 terminological entries in English
details all new publications released. Available online and and French, with equivalent terms in 25 additional languages.
once a month by email. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer
Service Centre: [e-mail].
– 2 – IEC 63510-2:2025 © IEC 2025
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Mapping of Use Cases and Use Case Functions to categories of appliances . 9
Bibliography . 11

Table 1 – Mapping of Use Cases to Categories of Appliances – White Goods . 9
Table 2 – Mapping of Use Cases to Categories of Appliances – HVAC . 10

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD APPLIANCES NETWORK AND GRID CONNECTIVITY –

Part 2: Product specific mappings, details, requirements and deviations

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 63510-2 has been prepared by IEC technical committee 59: Performance of household and
similar electrical appliances. It is an International Standard.
It is based on EN 50631-2:2023 and was submitted as a Fast-Track document.
The text of this International Standard is based on the following documents:
Draft Report on voting
59/818/CDV 59/834/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
– 4 – IEC 63510-2:2025 © IEC 2025
The language used for the development of this International Standard is English.
The structure and editorial rules used in this publication reflect the practice of the organization
which submitted it.
This document was developed in accordance with ISO/IEC Directives, Part 1 and ISO/IEC
Directives, IEC Supplement, available at www.iec.ch/members_experts/refdocs. The main
document types developed by IEC are described in greater detail at www.iec.ch/publications.
A list of all parts in the IEC 63510 series, published under the general title Household
appliances network and grid connectivity, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
INTRODUCTION
Energy management systems will more and more become necessary due to change from fossil
and nuclear to renewable production and the associated decentralization. Since an appropriate
standard for a home and building management is in preparation, this document specifies how
sets of products from multiple manufacturers can exchange information with Home and Building
/ Customer Energy Management Systems, located in a home network or in the cloud.
This document focuses on interoperability of household appliances and describes the
necessary control and monitoring. It defines a set of functions of household and similar
electrical appliances. The functions in this document cover next to energy-management main
remote-control and – monitoring use cases.
This document does not deal with safety and security requirements. Safety requirements have
been set in the IEC 60335 series [1] .
The IEC 63510 series provides interoperability on information exchange among various
appliances in the home. The IEC 63510 series is split into 4 parts:
IEC 63510-1: Household appliances network and grid connectivity – Part 1: General
Requirements, generic data modelling and neutral messages
IEC 63510-2: Household appliances network and grid connectivity – Part 2: Product specific
mappings, details, requirements and deviations
IEC 63510-3-x: Household appliances network and grid connectivity – Part 3: Specific Data
Model Mapping
IEC 63510-4-x: Household appliances network and grid connectivity – P
...