Electronic displays - Part 3-9: Evaluation of optical performance - Display sparkle contrast

IEC 62977-3-9:2023 specifies standard measurement conditions and methods for determining the sparkle contrast of direct-view displays which comprise display matrix elements to render real 2D images on a flat panel and an anti-glare layer. This document excludes measurement of sparkle, which is intentionally obtained by the specular reflection from reflecting flakes in coatings and paints.

General Information

Status
Published
Publication Date
21-Jun-2023
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
30-Jun-2023
Completion Date
22-Jun-2023
Ref Project

Buy Standard

Standard
IEC 62977-3-9:2023 - Electronic displays - Part 3-9: Evaluation of optical performance - Display sparkle contrast Released:6/22/2023
English language
32 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 62977-3-9 ®
Edition 1.0 2023-06
INTERNATIONAL
STANDARD
colour
inside
Electronic displays –
Part 3-9: Evaluation of optical performance – Display sparkle contrast
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 62977-3-9 ®
Edition 1.0 2023-06
INTERNATIONAL
STANDARD
colour
inside
Electronic displays –
Part 3-9: Evaluation of optical performance – Display sparkle contrast

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.120; 31.260 ISBN 978-2-8322-7063-9

– 2 – IEC 62977-3-9:2023 © IEC 2023
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms and letter symbols . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 7
3.3 Letter symbols . 7
4 Standard measurement conditions . 9
4.1 Environmental conditions . 9
4.2 Dark room conditions . 9
4.3 Warm-up time . 9
4.4 Measurement coordinate systems . 9
4.5 Standard conditions for the measuring equipment . 10
4.5.1 General . 10
4.5.2 Conditions of measuring equipment . 11
4.5.3 Standard measurement locations . 12
4.6 Test pattern . 12
5 Measurement methods . 13
5.1 Purpose . 13
5.2 Equipment and conditions . 13
5.3 Measurement procedure . 13
5.4 Calculation . 14
5.5 Report. 14
Annex A (informative) Imaging and sampling conditions of sparkle pattern . 15
A.1 Oversampling . 15
A.2 Undersampling . 16
Annex B (informative) Filtering methods for removing periodic modulations from the
image . 17
B.1 General . 17
B.2 Filtering methods . 18
B.2.1 Filtering in spatial domain . 18
B.2.2 Filtering in frequency-domain . 20
Annex C (informative) Hardware parameters that affect the sparkle contrast . 21
C.1 LMD aperture setting . 21
C.2 LMD focus . 21
C.3 Condition to avoid aliasing . 22
Annex D (informative) Sparkle contrast measurement with display mock-up . 23
D.1 Display mock-up . 23
D.2 Measurement . 23
Annex E (informative) Calculation of sparkle contrast by the difference image method . 25
E.1 Statistical background . 25
E.2 Measurement procedure of the difference image method . 25
E.3 Calculation of sparkle contrast by the difference image method . 26
Annex F (informative) Calculation of sparkle contrast by the pixel power deviation
method . 27
F.1 Pixel power deviation description . 27

F.2 Measurement procedure for the PPD method . 27
Annex G (informative) Elimination of low-frequency radiance variation from the sparkle
pattern . 29
G.1 General . 29
G.2 Normalization of the local average radiance of segmented sparkle pattern . 29
G.3 Calculating the mean or median value of the segmented sparkle pattern . 30
Bibliography . 31

Figure 1 – Cartesian coordinate system and spherical coordinate system for the
specification of the viewer's gazing (viewing) direction . 9
Figure 2 – Typical relative spectral response of a CCD detector array without IR-
blocking filter (B/W camera) and a luminance meter with a sensitivity according to
CIE V(λ) . 11
Figure 3 – Measurement setup . 13
Figure A.1 – Examples of sparkle image from the same DUT under different
measurement distances . 16
Figure B.1 – Display matrix element (grey square) in relation to the matrix of the
imaging LMD detector elements (squares according to LMD pixel pitch) for the case of
oversampling with an image sampling ratio of R = 3,5 . 18
S
Figure B.2 – Examples of sparkle patterns at R = 4,3 before applying an MWA filter
S
(left) and after applying an MWA filter (right) . 19
Figure B.3 – Electronic images of the DUT (i.e., display matrix elements with AGL, left)
and frequency components of that image used as basis for sparkle evaluation . 20
Figure C.1 – Example of the variation of the MTF of the imaging LMD under different
F‑numbers as a function of spatial frequency of LMD pixels . 21
Figure D.1 – Examples of display mock-ups . 23
Figure D.2 – Example of measurement configuration . 24
Figure G.1 – Example of the segmentation of the measurement field for the preparation
of the elimination of the low-frequency radiance variations from the sparkle pattern . 29

Table 1 – Letter symbols (quantity symbols and units) . 7
Table 2 – Distinguishing types of DUT, imaging conditions, number of involved images
and methods for suppression of display matrix modulations . 10
Table B.1 – Filtering method capabilities for removing artifacts related to display matrix
elements . 17

– 4 – IEC 62977-3-9:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRONIC DISPLAYS –
Part 3-9: Evaluation of optical performance –
Display sparkle contrast
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.