IEC 62386-207:2018

Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)

IEC 62386-207:2018 specifies a bus system for control by digital signals of electronic ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:  
fast fade time has been redefined;
short circuit and open circuit have been deleted;
physical selection has been deleted;
dimming curve selection has been moved to a separate part;
load increase, load decrease and reference measurement have been moved to a separate part;
thermal gear and lamp protection have been moved to separate parts;
LED module integrated has been moved to a separate part;
link to IEC 62386-102 error bits has been clarified;
the following commands have been deleted:  
ENABLE CURRENT PROTECTOR
DISABLE CURRENT PROTECTOR
QUERY POSSIBLE OPERATING MODES
QUERY SHORT CIRCUIT
QUERY OPEN CIRCUIT
QUERY CURRENT PROTECTOR ACTIVE
QUERY CURRENT PROTECTOR ENABLED
QUERY OPERATING MODE

Interface d’éclairage adressable numérique - Partie 207: Exigences particulières pour les appareillages de commande - Modules de LED (dispositifs de type 6)

L’IEC 62386-207:2018 spécifie un système à bus pour la commande par des signaux numériques des appareils d'éclairage électroniques conformes aux exigences de l'IEC 61347 (toutes les parties), en ajoutant les alimentations en courant continu.
Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:  
le temps de variation rapide a été redéfini;
les courts-circuits et les circuits ouverts ont été supprimés;
la sélection physique a été supprimée;
la sélection de la courbe de gradation a été déplacée dans une autre partie;
l’augmentation de charge, la chute de charge et le mesurage de référence ont été déplacés dans une autre partie;
la protection thermique de l'appareillage et la protection thermique de la lampe ont été déplacées dans d’autres parties;
les modules de LED intégrés ont été déplacés dans une autre partie;
le lien avec les bits d’erreur décrits dans l’IEC 62386-102 a été clarifié;
les commandes suivantes ont été supprimées:  
ENABLE CURRENT PROTECTOR
DISABLE CURRENT PROTECTOR
QUERY POSSIBLE OPERATING MODES
QUERY SHORT CIRCUIT
QUERY OPEN CIRCUIT
QUERY CURRENT PROTECTOR ACTIVE
QUERY CURRENT PROTECTOR ENABLED
QUERY OPERATING MODE

General Information

• Status: Published
• Publication Date: 11-Apr-2018
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 29.140.50 - Lighting installation systems
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: SC 34C - Auxiliaries for lamps
• Drafting Committee: WG 11 - TC 34/WG 11
• Current Stage: PPUB - Publication issued
• Start Date: 13-Apr-2018
• Completion Date: 12-Apr-2018

Relations

• Revises: IEC 62386-207:2009 - Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 62386-207 ®
Edition 2.0 2018-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –
Part 207: Particular requirements for control gear – LED modules (device type 6)

Interface d’éclairage adressable numérique –
Partie 207: Exigences particulières pour les appareillages de commande –
Modules de LED (dispositifs de type 6)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 21 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC -
Glossaire IEC - std.iec.ch/glossary
webstore.iec.ch/advsearchform
67 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC et en français, extraites des articles Termes et Définitions des
en utilisant différents critères (numéro de référence, texte, publications IEC parues depuis 2002. Plus certaines entrées
comité d’études,…). Elle donne aussi des informations sur les antérieures extraites des publications des CE 37, 77, 86 et
projets et les publications remplacées ou retirées. CISPR de l'IEC.

IEC Just Published - webstore.iec.ch/justpublished Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just Si vous désirez nous donner des commentaires sur cette
Published détaille les nouvelles publications parues. publication ou si vous avez des questions contactez-nous:
Disponible en ligne et aussi une fois par mois par email. [e-mail].

IEC 62386-207 ®
Edition 2.0 2018-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –

Part 207: Particular requirements for control gear – LED modules (device type 6)

Interface d’éclairage adressable numérique –

Partie 207: Exigences particulières pour les appareillages de commande –

Modules de LED (dispositifs de type 6)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50; 29.140.99 ISBN 978-2-8322-5500-1

– 2 – IEC 62386-207:2018 © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General . 9
4.1 General . 9
4.2 Version number . 9
5 Electrical specification . 9
6 Interface power supply . 9
7 Transmission protocol structure . 9
8 Timing . 9
9 Method of operation . 9
9.1 General . 9
9.2 Fast fade time . 9
9.3 Dimming curve . 10
9.3.1 General . 10
9.3.2 Dimming curve when IEC 62386-218 is implemented . 11
9.3.3 Dimming curve when IEC 62386-218 is not implemented . 11
9.4 Load deviation . 11
9.5 Thermal protection . 12
9.5.1 General . 12
9.5.2 Thermal gear protection . 12
9.5.3 Thermal lamp protection . 12
9.5.4 Behaviour of thermal protection . 12
9.6 Features information . 13
9.7 Failure status information . 13
9.8 LED module integrated . 13
10 Declaration of variables . 14
11 Definition of commands . 15
11.1 General . 15
11.2 Overview sheets . 15
11.3 Application extended commands . 17
11.3.1 General . 17
11.3.2 Configuration instructions . 17
11.3.3 Queries . 18
11.4 Special commands . 19
11.4.1 General . 19
11.4.2 ENABLE DEVICE TYPE (data) . 19
Bibliography . 20

Figure 1 – IEC 62386 graphical overview . 6

Table 1 – Fast fade times . 10

Table 2 – Control gear features . 13
Table 3 – Control gear failure status . 13
Table 4 – Control gear type . 14
Table 5 – Declaration of variables . 14
Table 6 – Application extended commands for this device type . 15

– 4 – IEC 62386-207:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –

Part 207: Particular requirements for control gear –
LED modules (device type 6)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees under
...