IEC 61162-402:2005
(Main)Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements
Specifies a minimum set of tests to be done, test results to be achieved and documents that shall be available for all implementations of general protocol software and applications that are compliant with the IEC 61162-4 standard.
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL IEC
STANDARD 61162-402
First edition
2005-09
Maritime navigation and radiocommunication
equipment and systems – Digital interfaces –
Part 402:
Multiple talkers and multiple listeners –
Ship systems interconnection –
Documentation and test requirements
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD 61162-402
First edition
2005-09
Maritime navigation and radiocommunication
equipment and systems – Digital interfaces –
Part 402:
Multiple talkers and multiple listeners –
Ship systems interconnection –
Documentation and test requirements
IEC 2005 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale W
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – 61162-402 IEC:2005(E)
CONTENTS
FOREWORD.4
1 Scope.6
1.1 General .6
1.2 Limitations in scope.6
1.3 Limitations in test coverage .7
1.4 Limitations in degree of detail.7
2 Normative references .7
3 Definitions .8
4 Overview and basic principles .9
4.1 Introduction .9
4.2 Purpose of this standard.9
4.3 Use in the different stages of a development process.9
4.4 Structure of this standard .10
5 Critical functionality in the protocol .10
5.1 Function groups .11
5.2 High loading and general exception handling.12
5.3 Generalised architecture .13
5.4 Message passing contribution to possible errors .14
6 Test tools and test scenarios .15
6.1 Reference topology .15
6.2 System configurations .15
6.3 Test MAUs .16
7 Test of general protocol modules.17
7.1 MAU session management .17
7.2 Interface management.18
7.3 Transaction management .20
7.4 Exception handling .24
7.5 General high load tests .25
8 T-profile tests .26
8.1 Peer-to-peer message networks .26
8.2 Client-server message networks.27
8.3 Client-server stream networks .27
8.4 Broadcast networks.28
9 Test requirements for applications.28
9.1 Companion standard specification .29
9.2 Interface correctness.29
9.3 High load tests .30
10 Documentation requirements for general protocol modules.30
10.1 General software and test documentation.30
10.2 Technical specifications .30
11 Documentation requirements for applications .31
11.1 General software and test documentation.31
11.2 Companion standard specification .31
11.3 Technical specification .31
61162-402 IEC:2005(E) – 3 –
Annex A (informative) Companion standard specifications .32
Annex B (informative) Examples of numeric values for tests .37
Figure 1 – Typical communication paths in an IEC 61162-4 system .13
Figure 2 – Message flow in IEC 61162-4 system.14
Figure 3 – Test topology .15
Figure 4 – Multiple client/server connections.22
Table 1 – Transaction test requirements summary .21
Table B.1 – Extreme values .37
Table B.2 – Significant decimals .38
– 4 – 61162-402 IEC:2005(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
MARITIME NAVIGATION AND RADIOCOMMUNICATION
EQUIPMENT AND SYSTEMS –
DIGITAL INTERFACES –
Part 402: Multiple talkers and multiple listeners –
Ship systems interconnection –
Documentation and test requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 61162-402 has been prepared by Technical Committee 80: Maritime navigation and
radiocommunication equipment and systems.
The text of this standard is based on the following documents:
FDIS Report on voting
80/411/FDIS 80/421/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
61162-402 IEC:2005(E) – 5 –
IEC 61162 consists of the following parts, under the general title Maritime navigation and
radiocommunication equipment and systems – Digital interfaces:
Part 1: Single talker and multiple listeners
Part 2: Single talker and multiple listeners, high-speed transmission
Part 3: Multiple talkers and multiple listeners – Serial data instrument network (under
consideration)
Part 400: Multiple talkers and multiple listeners – Ship systems interconnection –
Introduction and general principles
Part 401: Multiple talkers and multiple listeners – Ship systems interconnection –
Application profile
Part 402: Multiple talkers and multiple listeners – Ship systems interconnection –
Documentation and test requirements
Part 410: Multiple talkers and multiple listeners – Ship systems interconnection –
Transport profile requirements and basic transport profile
Part 420: Multiple talkers and multiple listeners – Ship systems interconnection –
Companion standard requirements and basic companion standards
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.