Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric

IEC 61196-10:2014 applies to semi-rigid coaxial communication cables with polytetrafluoroethylene (PTFE) dielectric and tubular outer conductor. These cables are intended for use in microwave and wireless equipments or other signal transmission equipments or units at frequencies above 500 MHz. The contents of the corrigendum of February 2016 have been included in this copy.
This publication is to be read in conjunction with IEC 61196-1:2005.

Câbles coaxiaux de communication - Partie 10: Spécification intermédiaire relative aux câbles semi-rigides à diélectrique en polytétrafluoroéthylène (PTFE)

L'IEC 61196-10:2014 s'applique aux câbles coaxiaux semi-rigides de communication comportant un diélectrique en polytétrafluoroéthylène (PTFE) et un conducteur extérieur tubulaire. Ces câbles sont destinés à être utilisés dans les équipements à microondes et sans fil ou dans d'autres équipements ou unités de transmission de signal, à des fréquences supérieures à 500 MHz. Le contenu du corrigendum publié en février 2016 est inclus dans ce document.
Cette publication doit être lue conjointement avec la IEC 61196-1:2005.

General Information

Status
Published
Publication Date
24-Sep-2014
Technical Committee
Drafting Committee
Current Stage
DELPUB - Deleted Publication
Start Date
12-Jul-2021
Completion Date
23-Nov-2022
Ref Project

Relations

Buy Standard

Standard
IEC 61196-10:2014 - Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric Released:9/25/2014 Isbn:9782832218662
English language
17 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61196-10:2014 - Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
English and French language
33 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61196-10 ®
Edition 1.0 2014-09
INTERNATIONAL
STANDARD
Coaxial communication cables –
Part 10: Sectional specification for semi-rigid cables with
polytetrafluoroethylene (PTFE) dielectric

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00

CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 61196-10 ®
Edition 1.0 2014-09
INTERNATIONAL
STANDARD
Coaxial communication cables –

Part 10: Sectional specification for semi-rigid cables with

polytetrafluoroethylene (PTFE) dielectric

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
Q
ICS 33.120.10 ISBN 978-2-8322-1866-2

– 2 – IEC 61196-10:2014 © IEC 2014

CONTENTS
FOREWORD . 3

1 Scope . 5

2 Normative references . 5

3 Terms and definitions . 6

4 Materials and cable construction . 6

4.1 Cable construction . 6

4.2 Inner conductor . 6
4.3 Dielectric . 7
4.4 Outer conductor . 7
4.5 Sheath (when applicable) . 7
5 Standard rating and characteristics . 7
5.1 Characteristic impendence . 7
5.2 Rated temperature range . 7
6 Identification, marking and labeling . 8
6.1 Cable identification . 8
6.1.1 Type name . 8
6.1.2 Variants . 8
6.2 IEC marking . 8
6.3 Labelling . 8
7 Requirements of finished cables . 8
7.1 General . 8
7.2 Electrical requirements (see Table 1) . 8
7.3 Environmental requirements (see Table 2) . 10
7.4 Mechanical requirements (see Table 3) . 10
8 Delivery and storage . 11
Annex A (informative) Quality assessment . 12
A.1 General . 12
A.2 Qualification approval and its maintenance . 12
A.2.2 Capability approval . 14
A.2.3 Quality conformance inspection . 14
A.2.4 Periodic inspection . 16

Bibliography . 17

Table 1 – Electrical requirements . 9
Table 2 – Environmental requirements . 10
Table 3 – Mechanical requirements. 10
Table A.1 – Qualification inspection . 13
Table A.2 – Quality conformance inspection . 15

INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
COAXIAL COMMUNICATION CABLES –

Part 10: Sectional specification for semi-rigid cables

with polytetrafluoroethylene (PTFE) dielectric

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 61196-10 has been prepared by subcommittee 46A: Coaxial
cables, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories.
This first edition cancels and replaces IEC 61196-2 published in 1995. This edition constitutes
a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
46A/1213/FDIS 46A/1232/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

– 4 – IEC 61196-10:2014 © IEC 2014

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

This publication is to be read in conjunction with IEC 61196-1:2005.

A list of all parts in the IEC 61196 series, published under the general title Coaxial

communication cables, can be found on the IEC website.

The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be

• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
The contents of the corrigendum of February 2016 have been included in this copy.

COAXIAL COMMUNICATION CABLES –

Part 10: Sectional specification for semi-rigid cables

with polytetrafluoroethylene (PTFE) dielectric

1 Scope
This part of IEC 61196 applies to semi-rigid coaxial communication cables with
polytetrafluoroethylene (PTFE) dielectric and tubular outer conductor. These cables are
intended for use in microwave and wireless equipments or other signal transmission
equipments or units at frequencies above 500 MHz. It is to be read in conjunction with
IEC 61196-1:2005.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60068-1:1988, Environmental testing – Part 1: General and guidance
IEC 60068-1:1988/AMD 1:1992
IEC 61169-4, Radio-frequency connectors – Part 4: RF coaxial connectors with inner diameter
of outer conductor 16 mm (0,63 in) with screw lock – Characteristic impedance 50 Ω
(type 7-16)
IEC 61196-1:2005, Coaxial communication cables – Part 1: Generic specification – General,
definitions and requirements
IEC 61196-1-1, Coaxial communication cables – Part 1-1: Capability approv
...


IEC 61196-10 ®
Edition1.0 2014-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Coaxial communication cables –
Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene
(PTFE) dielectric
Câbles coaxiaux de communication –
Partie 10: Spécification intermédiaire relative aux câbles semi-rigides à
diélectrique en polytétrafluoroéthylène (PTFE)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 15
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC 65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte, et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées. antérieures extraites des publications des CE 37, 77, 86 et

CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61196-10 ®
Edition 1.0 2014-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Coaxial communication cables –

Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene

(PTFE) dielectric
Câbles coaxiaux de communication –

Partie 10: Spécification intermédiaire relative aux câbles semi-rigides à

diélectrique en polytétrafluoroéthylène (PTFE)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.10 ISBN 978-2-8322-3229-3

– 2 – IEC 61196-10:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references. 5
3 Terms and definitions . 6
4 Materials and cable construction . 6
4.1 Cable construction . 6
4.2 Inner conductor . 6
4.3 Dielectric . 7
4.4 Outer conductor . 7
4.5 Sheath (when applicable) . 7
5 Standard rating and characteristics . 7
5.1 Characteristic impendence . 7
5.2 Rated temperature range . 7
6 Identification, marking and labeling . 8
6.1 Cable identification . 8
6.1.1 Type name . 8
6.1.2 Variants . 8
6.2 IEC marking . 8
6.3 Labelling . 8
7 Requirements of finished cables . 8
7.1 General . 8
7.2 Electrical requirements (see Table 1) . 8
7.3 Environmental requirements (see Table 2) . 10
7.4 Mechanical requirements (see Table 3) . 10
8 Delivery and storage . 11
Annex A (informative) Quality assessment . 12
A.1 General . 12
A.2 Qualification approval and its maintenance . 12
A.2.2 Capability approval . 14
A.2.3 Quality conformance inspection . 14
A.2.4 Periodic inspection . 16
Bibliography . 17

Table 1 – Electrical requirements . 9
Table 2 – Environmental requirements . 10
Table 3 – Mechanical requirements . 10
Table A.1 – Qualification inspection . 13
Table A.2 – Quality conformance inspection . 15

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COAXIAL COMMUNICATION CABLES –

Part 10: Sectional specification for semi-rigid cables
with polytetrafluoroethylene (PTFE) dielectric

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsib
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.