IEC 60444-7:2004

Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units

IEC 60444-7:2004 applies to activity and frequency dips for quartz crystal units over a temperature range.

Mesure des paramètres des résonateurs à quartz - Partie 7: Mesure des baisses de l'activité et de la fréquence des résonateurs à quartz

La CEI 60444-7:2004 s'applique aux baisses de l'activité et de la fréquence pour des résonateurs à quartz sur une gamme de températures.

General Information

• Status: Published
• Publication Date: 04-Apr-2004
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 31.140 - Piezoelectric devices
• Technical Committee: TC 49 - Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection
• Drafting Committee: WG 11 - TC 49/WG 11
• Current Stage: PPUB - Publication issued
• Start Date: 31-Jul-2004
• Completion Date: 05-Apr-2004

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 60444-7
First edition
2004-04
Measurement of quartz crystal unit parameters –
Part 7:
Measurement of activity and frequency dips
of quartz crystal units
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (http://www.iec.ch/searchpub/cur_fut.htm)
enables you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (http://www.iec.ch/online_news/
justpub/jp_entry.htm) is also available by email. Please contact the Customer
Service Centre (see below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 60444-7
First edition
2004-04
Measurement of quartz crystal unit parameters –
Part 7:
Measurement of activity and frequency dips
of quartz crystal units
 IEC 2004  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale H
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

– 2 – 60444-7  IEC:2004(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS –

Part 7: Measurement of activity and frequency dips
of quartz crystal units
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60444-7 has been prepared by IEC technical committee 49:
Piezoelectric and dielectric devices for frequency control and selection.
The text of this standard is based on the following documents:
FDIS Report on voting
49/637/FDIS 49/664/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

60444-7  IEC:2004(E) – 3 –
This standard forms Part 7 of a series of publications dealing with measurements of quartz
crystal unit parameters
IEC 60444 consists of the following parts, under the general title Measurement of quartz
crystal unit parameters:
Part 1: Basic method for the measurement of resonance frequency and resonance
resistance of quartz crystal units by zero phase technique in a pi-network
Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units
Part 4: Method for the measurement of the load resonance frequency f , load resonance
L
resistance R and the calculation of other derived values of quartz crystal units, up to
L
30 MHz
Part 5: Methods for the determination of equivalent electrical parameters using automatic
network analyzer techniques and error correction
Part
...

IEC 60444-7 ®
Edition 1.0 2004-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Measurement of quartz crystal unit parameters –
Part 7: Measurement of activity and frequency dips of quartz crystal units

Mesure des paramètres des résonateurs à quartz –
Partie 7: Mesure des baisses de l'activité et de la fréquence des résonateurs
à quartz
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: [e-mail].
IEC 60444-7 ®
Edition 1.0 2004-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Measurement of quartz crystal unit parameters –

Part 7: Measurement of activity and frequency dips of quartz crystal units

Mesure des paramètres des résonateurs à quartz –

Partie 7: Mesure des baisses de l'activité et de la fréquence des résonateurs

à quartz
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX H
ICS 31.140 ISBN 978-2-83220-705-5

– 2 – 60444-7  IEC:2004
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS –

Part 7: Measurement of activity and frequency dips
of quartz crystal units
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60444-7 has been prepared by IEC technical committee 49:
Piezoelectric and dielectric devices for frequency control and selection.
This bilingual version (2013-05) corresponds to the monolingual English version, published in
2004-04.
The text of this standard is based on the following documents:
FDIS Report on voting
49/637/FDIS 49/664/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The French version of this standard has not been voted upon.

60444-7  IEC:2004 – 3 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard forms Part 7 of a series of publications dealing with measurements of quartz
crystal unit parameters
IEC 60444 consists of the following parts, under the general title Measurement of quartz
crystal unit parameters:
Part 1: Basic method for the measurement of resonance frequency and resonance
resistance of quartz crystal units by zero phase technique in a pi-network
Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units
Part 4: Method for the measurement of the load resonance frequency f , load resonance
L
resistance R and the calculation of other derived values of quartz crystal units, up to
L
30 MHz
Part 5: Methods for the determination of equivalent electrical parameters using automatic
network analyzer techniques and error correction
Part 6: Measurement of drive level dependence (DLD)
Part 7: Measurement of activity and frequency dips of quartz crystal units
Part 8: Test fixture for surface mounted quartz crystal units
The committee has decided that the contents of this publication will remain unchanged until
2008. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 4 – 60444-7  IEC:2004
INTRODUCTION
The tolerable activity dips of resonant resistance and frequency (Bandbreak) will be specified
in the detail specification. The measurement and evaluation of the activity/frequency dip for
the quartz crystal unit requires special consideration as it uses the linear least squares
method.
60444-7  IEC:2004 – 5 –
MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS –

Part 7: Measurement of activity and frequency dips
of quartz crystal units
1 Scope
This standard applies to activity and frequency dips for quartz crystal units over a temperature
range.
2 Definitions
2.1
activity dip
undesirable change in the crystal unit’s load resonance frequency and/or resonance
resistance caused by the coupling of different modes in a narrow temperature range and at a
specified load capacitance and level of drive (see Figures 1 and 2)
2.2
frequency dip (bandbreak)
undesirable perturbation or fluctuation in the crystal frequency occurring in a narrow
temperature range as a deviation of the load resonance frequency from the smooth regular
th
frequency temperature characteristic described by a polynomial of up to the 5 order. It
usually shows an associated resistance change (see Figure 2) and the effect is usually drive
level dependent
3 Measurements
The following measurement parameters are necessary and should be given in the detail
specification:
– operating temperature range;
– load capacitance;
– level of drive.
The evaluation of the data is made using a computer and is described in 3.3.
Care shall be taken in selecting a suitable measurement time; this will depend on the type of
crystal unit being measured. The drive current (in microamperes) shall also be correct and
controlled.
The inspection method is selected from the following and specified in the individual
specification:
a) lot inspection and guaranteed by process control;
b) sample inspection.
3.1 Reference method
The measurement system consists of a π-network in accordance with IEC 60444 and a high
precision temperature chamber, which allows to ramp-up the temperature at a constant small
rate.
– 6 – 60444-7  IEC:2004
Each crystal is measured individually within the specified temperature range beginning at the
lowest temperature as defined below. The temperature is then increased with a constant rate
up to the maximum temperature as defined below.
NOTE The temperature performance of the chamber should allow for the appropriate resolution and a monotonic
small temperature ramp.
The minimum/maximum measurement temperature shall be 5 K lower/10 K higher than the
specified minimum/maximum operating temperature.
The number of data points should be such, that the temperature intervals between the
measurement points are less or equal to 0,2 K.
The rate of temperature change shall be 2 K/min ± 10 % within the whole temperature range.
The actual temperature at a location in the vicinity of the crystal under test must be recorded
at each measurement point together with the actual (load) resonance frequency and
resistance.
The frequency and resistance are measured at the specified drive level and at the specified
resonance condition, i.e. load resonance, resonance (zero phase), or series resonance.
The measurement points shall lie within one tenth of the resonance bandwidth.
NOTE Because of the irregular and discontinuous behaviour
...