IEC 60059
IEC standard current ratings
IEC standard current ratings
IEC 60059: 1999 standard specifies standard current ratings for electrical devices, apparatus, instruments. This standard does not apply to current ratings of components and parts used within electrical devices or items of equipment. This International Standard has the status of a horizontal standard in accordance with IEC Guide 108.
Caractéristiques des courants normaux de la CEI
La CEI 60059: 1999 spécifie les caractéristiques des courants normaux pour les dispositifs, appareils, instruments et appareils de mesure. La présente norme ne s'applique pas aux caractéristiques des courants qui concernent les composants et les parties utilisés à l'intérieur des dispositifs électriques ou articles correspondant au matériel. Cette norme a le statut de norme horizontale conformément au Guide 108.
Standardni tokovi IEC
General Information
Standards Content (sample)
SIST IEC 60059:1996
---------------------- Page: 1 ----------------------
SIST IEC 60059:1996
---------------------- Page: 2 ----------------------
...
This May Also Interest You
a.c. transmission, distribution and utilization systems and equipment for use in such systems with standard frequencies 50 Hz and 60 Hz having a nominal voltage above 100 V; a.c. and d.c. traction systems; a.c. and d.c. equipment having nominal voltages below 120 V a.c. or below 750 V d.c., the a.c. voltages being intended (but not exclusively) for 50 Hz and 60 Hz applications; such equipment covers batteries (from primary or secondary cells), other power supply devices (a.c. or d.c.), electrical equipment (including industrial and communication), and appliances.[
]Has the status of a basic publication in accordance with IEC Guide 108[
]This consolidated version consists of the sixth edition (1993), its amendment 1 (1994) and its amendment 2 (1997). Therefore, no need to order amendments in addition to this publication.
- Standard – translation11 pagesSlovenian languagesale 10% offe-Library read for×1 day
This Publicly Available Specification (PAS) defines a methodology for power system domain experts to determine and describe their user requirements for automation systems, based on their utility business needs. This methodology was originally developed as part of the IntelliGrid Architecture developed by the Electrical Power Research Institute (EPRI), as a means to implement the 'IntelliGrid vision' of the automated, self-healing, and efficient power system of the future.
- Technical report126 pagesEnglish languagesale 10% offe-Library read for×1 day
This technical report IEC/TR 62510:2008(E) outlines the way in which electricity is now described as a product. Particularly, in Europe and several other areas, for example Brazil and Argentina, as well as in some states in the United States of America. It is, however, rather a unique product because of its intangible and transient nature. Strictly, it is a product that exists only for an instant at a given point of delivery, comes into existence at the same instant at which it is being used and is replaced immediately by a new product with rather different characteristics. Its characteristics are different at each separate point of delivery. Moreover, it is a product whose quality depends not only on the elements that go into its production, but also in the way in which it is being used at any instant by the equipment of multiple users.
- Technical report10 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 60038:2009 specifies standard voltage values which are intended to serve as preferential values for the nominal voltage of electrical supply systems, and as reference values for equipment and system design. This seventh edition supersedes the sixth edition (1993), its Amendment 1 (1994) and its Amendment 2 (1997). It constitutes a technical revision. The significant technical changes are:
- the addition of the values of 230 V (50 Hz) and 230/400 V (60 Hz) to Table 1;
- the replacement of the utilization voltage range at LV by a reference to the relevant standard and an informative annex;
- the addition of the value of 30 kV to Table 3;
- the replacement of the value of 1 050 kV by 1 100 kV in Table 5.
It has the status of a horizontal standard in accordance with IEC Guide 108.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard14 pagesFrench languagesale 10% offe-Library read for×1 day
- Standard – translation12 pagesSlovenian languagesale 10% offe-Library read for×1 day
IEC 60364-7-710:2021 applies to electrical installations in medical locations so as to provide safety of patients and medical staff. These requirements refer to:
– hospitals and clinics or equivalent institutions (including equivalent transportable and mobile locations);
which, subject to assessment (710.30), can also include:
– sanatoriums and health clinics;
– dedicated locations in homes for senior citizens and aged care homes, where patients receive medical care;
– medical centres, outpatients' clinics and departments, casualty wards;
– other outpatients' institutions (industrial, sports and others);
– medical and dental practices;
– dedicated medical rooms in the workplace;
– other locations where medical electrical equipment is used;
– veterinary clinics;
– rooms in existing installations where a change of utilization for medical applications occur.
This list is not exhaustive.
The requirements of this document do not apply to ME equipment or ME systems.
This edition includes the following significant technical changes with respect to the previous edition:
a) the scope provides improved information to the application of this document;
b) some terms and definitions have been revised;
c) the validity of the respective parts of the IEC 60364 series has been verified and clauses updated;
d) Clause 710.30 has been extended;
e) Clause 710.41 has been updated;
f) Clause 710.413 has been renumbered as Clause 710.411;
g) in 710.411 insulation fault location systems have been added;
h) Clause 710.421 has been extended to include arc fault detection devices;
i) Clause 710.44 has been added;
j) Clause 710.51 has been updated and now covers distribution boards and electrical operating areas;
k) Clause 710.514, has been extended and includes separate subclauses on diagrams, documentation and operating instructions;
l) Subclauses 710.531 to 710.537 have been added;
m) Clause 710.55 has been updated;
n) Clause 710.56 has been added;
o) Clause 710.6, Verification, has been revised;
p) Annex A was deleted, and the contents integrated into 710.560.4;
q) former Annex B is now Annex A and has been updated;
r) an informative Annex B on guidance concerning electromagnetic interferences (EMI) in installations of buildings has been added
- Standard83 pagesEnglish and French languagesale 15% off
Is intended for guidance in estimating the permissible values for temperature and temperature rise of component parts of electrical equipment carrying current under steady state conditions.[
]The present report is intended to supply:[
]- general data on the structure of electric contacts and the calculation of their ohmic resistance;[
]- the basic ageing mechanisms of contacts;[
]- the calculation of the temperature rise of contacts and connection terminals;[
]- the maximum 'permissible' temperature and temperature rise for various components, in particular the contacts, the connection terminals and the conductors connected to them;[
]- the general procedure to be followed by product committees for specifying the permissible temperature and temperature rise.
- Technical report59 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC TS 60695-2-20:2021 describes a test method that applies to solid electrical insulating materials of which test specimens can be provided. The test measures the time required to ignite a test specimen when it is affected by heat from an electrically heated wire wound around the test specimen. If the test specimen drips, the time at which this occurs is also recorded.
The test method can be used to provide classifications which can be used for quality assurance, the preselection of materials of products as described in IEC 60695-1-30, or to verify the required minimum classification of materials used in end products.
This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.
This third edition of IEC TS 60695-2-20 cancels and replaces the second edition of IEC TS 60695-2-20 published in 2004. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– Contents page added
– Updated Scope (Clause 1)
– Updated Terms and Definitions, added new relevant terms (Clause 3)
– Updated Principle (Clause 4)
– Updated Apparatus (Clause 5; recommendation to change the power source from a.c. to d.c. with a constant current output. Reason for this recommendation: d.c. technology is easier to obtain and to handle, which has been found to improve the Repeatability and Reproducibility of the test.
– Updated Test specimen dimensions (6.2)
– Revised Test procedure (Clause 8)
– Revised Observations and measurements (Clause 9)
– Revised Evaluation of test results (Clause 10)
– Revised Test report (Clause 11)
– Revised Annex A: Deletion of conformational test; Guidance on verification of the heater wire winding before testing
– Addition of normative Annex B: HWCT PLC Classes
– Addition of informative Annex C: Calibration curve to determine test current (Ic) in a spreadsheet program
– Addition of informative Annex D: Precision data
It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.
This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
- Technical specification30 pagesEnglish languagesale 15% off
IEC 62934:2021 provides terms and definitions in the subject area of grid integration of renewable energy generation. The technical issues of grid integration mainly focus on the issues caused by renewable energy generation with variable sources and/or converter based technology, such as wind power and photovoltaic power generation. Some renewable energy generations such as hydro power and biomass power with a relatively continuously available primary energy source and a rotating generator are conventional sources of generation, and are therefore not covered in this document.
The intention of this document is to answer the question "what do the words mean" and not "under what conditions do the terms apply".
- Standard76 pagesEnglish and French languagesale 15% off
- Standard22 pagesEnglish and French languagesale 15% off
- Standard3 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.