Amendment 1 - Assessment of lighting equipment related to human exposure to electromagnetic fields

Amendement 1 - Évaluation d'un équipement d'éclairage relativement à l'exposition humaine aux champs électromagnétiques

General Information

Status
Published
Publication Date
14-Jun-2022
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
13-Jul-2022
Completion Date
15-Jun-2022
Ref Project

Relations

Buy Standard

Standard
IEC 62493:2015/AMD1:2022 - Amendment 1 - Assessment of lighting equipment related to human exposure to electromagnetic fields
English and French language
13 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 62493 ®
Edition 2.0 2022-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
AMENDMENT 1
AMENDEMENT 1
Assessment of lighting equipment related to human exposure to
electromagnetic fields
Évaluation d’un équipement d’éclairage relativement à l’exposition humaine
aux champs électromagnétiques
IEC 62493:2015-03/AMD1:2022-06(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur les adapté à vos besoins.
projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 300 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 19 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 62493 ®
Edition 2.0 2022-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1
Assessment of lighting equipment related to human exposure to

electromagnetic fields
Évaluation d’un équipement d’éclairage relativement à l’exposition humaine

aux champs électromagnétiques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.020; 29.140.99 ISBN 978-2-8322-3827-1

– 2 – IEC 62493:2015/AMD1:2022
 IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ASSESSMENT OF LIGHTING EQUIPMENT RELATED
TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 62493:2015 has been prepared by IEC technical committee 34: Lighting.
The text of this Amendment is based on the following documents:
Draft Report on voting
34/827/CDV 34/906/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications/.

 IEC 2022
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.

– 4 – IEC 62493:2015/AMD1:2022
 IEC 2022
INTRODUCTION
Replace the second paragraph of the introduction with the following new paragraph:
This standard is designed to assess, by measurements and/or calculations, electromagnetic
(EM) fields and their potential effect on the human body by reference to exposure levels of the
general public given by ICNIRP 2020 [1] , ICNIRP 2010 [2], IEEE C95.1:2005 [3] and IEEE
C95.6:2002 [4]. The exposure levels with which to comply are basic restrictions (both ICNIRP-
and IEEE-based).
3 Terms, definitions, physical quantities, units and abbreviations
3.1.14
intentional radiator
Add the following Note to entry to terminological entry 3.1.14:
Note 1 to entry: Devices that are designed to only receive electromagnetic fields from other sources are not
considered as intentional radiators. For example, near field communication (NFC) transducers are not considered as
intentional radiators.
4 Limits
4.1 General
Replace the first paragraph of 4.1 with the following new paragraph and note:
The basic restrictions or reference levels for the general public of either IEEE C95.1-2005 or
ICNIRP (ICNIRP 2020 and ICNIRP 2010) are used, see Annex C.
NOTE Reference levels have been taken from ICNIRP publications however, basic restrictions of IEEE and ICNIRP
are essentially the same.
6 Measurement procedure for the Van der Hoofden test
6.1 General
Replace the first sentence of 6.1 with the following new sentence:
The assessment method is based on basic restrictions given in both ICNIRP 2020 and ICNIRP
2010, or in IEEE C95.1-2005.
7.2.3 Determination of the low-power exclusion level
Replace the third sentence of 7.2.3 with the following new sentence:
___________
Numbers in square brackets refer to the Bibliography.

 IEC 2022
For instance for ICNIRP 2020, general public exposure, the worst case low-power exclusion
level is 20 mW for head and trunk.

C.2 ICNIRP
Replace the existing Clause C.2, including its title, with the following new Clause C.2:
C.2 ICNIRP basic restrictions
C.2.1 Basic restrictions - SAR
Table C.1 provides the basic restrictions (SAR) for general public exposure to time varying
electric and magnetic fields for frequencies between 100 kHz and 300 GHz (see [1]):
Table C.1 – Basic restrictions for general public exposure to time varying
electric and magnetic fields for frequencies between 100 kHz and 300 GHz
Frequency range Average SAR Localised SAR Localised SAR
(whole body) (head and trunk) (limbs)
W/kg W/kg W/kg
100 kHz to 6 GHz 0,08 2 4
a a
> 6 GHz to 300 GHz 0,08 NA NA
a
NA signifies "not applicable" and does not need to be taken into account when determining compliance.

C.2.2 Basic restrictions – Internal electric field
Table C.2 provides the basic restrictions for general public exposure to time varying electric
and magnetic fields for frequencies up to 10 MHz (see [1], [2]):
Table C.2 – Basic restrictions for general public exposure to time varying
electric and magnetic fields for frequencies up to 10 MHz
Exposure characteristic Frequency range Internal electric field
V/m
CNS tissue of the head 1 Hz to 10 Hz 0,1/f
10 Hz to 25 Hz 0,01
−4
25 Hz to 1 kHz 4 × 10 f
1 kHz to 3 kHz 0,4
−4
3 kHz to 10 MHz 1,35 × 10 f
All other tissues (head and body) 1 Hz to 3 kHz 0,4
−4
3 kHz to 10 MHz 1,35 × 10 f
f is the frequency in Hz.
All values are RMS.
C.2.3 Changes introduced by ICNIRP 2020 with respect to ICNIRP 1998 and ICNIRP 2010
Changes for the basic restrictions (SAR) from ICNIRP 1998 to ICNIRP 2020 have been made
by (i) extending the considered spectrum up to 100 GHz, while (ii) between 100 kHz and 6 GHz
limits remain unchanged and (iii) for frequencies above 6 GHz it has been found that they do
not need to be taken into account when determining compliance.

--------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.