IEC TR 63130:2018

Dimming and hot restrike of metal halide lamps

IEC TR 63130:2018(E) describes the current state of experts’ opinions on the standardization of metal halide lamps to cover the relevant parameters for hot restrike and for dimming in combination with low frequency square wave ballasts. It provides guidelines for supplementing or modifying IEC 61167 in order that these conditions are covered.

General Information

• Status: Published
• Publication Date: 23-May-2018
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 29.140.01 - Lamps in general
• Technical Committee: SC 34A - Electric light sources
• Current Stage: PPUB - Publication issued
• Start Date: 13-Jun-2018
• Completion Date: 24-May-2018

Standards Content (Sample)

IEC TR 63130 ®
Edition 1.0 2018-05
TECHNICAL
REPORT
colour
inside
Dimming and hot restrike of metal halide lamps

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
IEC TR 63130 ®
Edition 1.0 2018-05
TECHNICAL
REPORT
colour
inside
Dimming and hot restrike of metal halide lamps

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.140.01 ISBN 978-2-8322-5750-0

– 2 – IEC TR 63130:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Changes to IEC 61167 to specify hot restrike . 7
4.1 General . 7
4.2 Lamp caps . 7
4.3 Starting and warm-up characteristics . 7
4.4 Information on ballast, ignitor and luminaire design . 7
4.5 Data sheets . 7
4.6 Additions to IEC 61167:2015, Annex G (Low frequency square wave
operation) . 10
5 Changes to IEC 61167 to specify dimming . 10
5.1 General . 10
5.2 Text for IEC 61167:2015, Annex G . 10
5.3 Explanation of new parameters . 11
Bibliography . 14

Figure 1 – Explanatory diagrams. 10

Table 1 – Requirements for dimming . 11
Table 2 – Explanation of new parameters . 12

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIMMING AND HOT RESTRIKE OF METAL HALIDE LAMPS

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a Technical Report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 63130, which is a Technical Report, has been prepared by subcommittee 34A: Lamps,
of IEC technical committee 34: Lamps and related equipment.
The text of this Technical Report is based on the following documents:
Draft TR Report on voting
34A/2012/DTR 34A/2027/RVDTR
Full information on the voting for the approval of this Technical Report can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – IEC TR 63130:2018 © IEC 2018
This document is to be used in conjunction with IEC 61167:2015.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
INTRODUCTION
Much work has been carried out in recent years on “advanced” properties of metal halide
lamps, particularly on the subject of hot restrike and dimming. These issues have been
discussed within SC 34A. However, the changes in technology and the focus of experts in the
field of lighting products has meant that there is now less market relevance or interest or
resources available to carry this work through with a view to publishing amendments to
IEC 61167, the standard on metal halide performance.
It was therefore considered that the publication of this "state of the art" data as a Technical
Report would be more useful. This document represents the current state of experts’ opinions
on how metal halide lamps should be standardized to cover the relevant parameters for hot
restrike and dimming.
This document contains additional comments and material with respect to IEC 61167.
This document is intended only as a guide for future standardizers and is not intended to be
used normatively.
– 6 – IEC TR 63130:2018 © IEC 2018
DIMMING AND HOT RESTRIKE OF METAL HALIDE LAMPS

1 Scope
This document describes the current state of experts’ opinions on the standardization of metal
halide lamps to cover the relevant parameters for hot restrike and for dimming in combination
with low frequency square wave ballasts. It provides guidelines for supplementing or
modifying IEC 61167 in order that these conditions are covered.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 61167:2015 , Metal halide lamps – Performance specification
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
hot-restrike
ability of a lamp to restart immediately at any moment after switching off the lamp
3.2
superimposed symmetric pulse ignition
to be updated
Note 1 to entry: To update IEC 61167, a new definition is required, complying with the definition of ignition pulse
voltage in IEC 61347-1:2015.
3.3
pulse width
to be updated
Note 1 to entry: To update IEC 61167, a new definition is required, see also Figure 1 proposed for Annex G.
3.4
pulse repetition frequency
to be updated
Note 1 to entry: To update IEC 61167, a new definition is required, see description in Annex G.
_____________
Withdrawn.
3.5
pulse symmetry
to be updated
Note 1 to entry: To update IEC 61167, a new definition is required, see description in Annex G.
3.6
polarized base
base allowing for specified voltage behaviour with one pin defined as reference
4 Changes to IEC 61167 to specify hot restrike
4.1 General
The following additions and/or modifications to IEC 61167:2015 are expected to be necessary
in order to make the standard suitable for specifying lamps for hot restrike and to give
adequate information on low frequency ballast design.
Hot restrike of metal halide lamps is distinguished from the more common warm restrike
situation where the lamp needs to cool down after switching off f
...