IEC 60286-5:2003

Packaging of components for automatic handling - Part 5: Matrix trays

IEC 60286-5:2003 describes the common dimensions, tolerances and characteristics of the tray. It includes only those dimensions which are essential for the handling of the trays for the stated purpose and for placing or removing components from the trays. This edition includes the following significant technical changes from the previous edition:
a) The generic rules for the design of matrix trays are given in this standard. Newly developed trays which follow these rules will not be listed individually. Only those trays which conform to the design rules set forth herein are classified as "standard trays" and are thus preferred for use.
b) An update of the matrix trays, which do not conform to the design rules set forth herein, are considered as "non-standard trays" and are not preferred for use, is listed in Annex A.

Emballage des composants pour opérations automatisées - Partie 5: Supports matriciels

L'IEC 60286-5:2003 décrit les dimensions communes, les tolérances et les caractéristiques des supports. Elle ne comprend que les dimensions qui sont essentielles pour la manipulation des supports dans le but indiqué et pour le chargement et le déchargement des composants sur ces supports. Par rapport à l'édition précédente, la présente édition inclut les modifications techniques significatives suivantes:
a) Les règles génériques pour la conception des supports matriciels sont données dans la présente norme. Les supports de développement récent qui suivent ces règles ne seront pas listées individuellement. Seuls les supports qui sont conformes aux règles de conception exposées ci-après sont classés comme "supports normalisés" et constituent ainsi les modèles préférentiels.
b) Une liste mise à jour des supports matriciels qui ne sont pas conformes aux règles de conception exposées ci-après, qui sont considérés comme des "supports non normalisés" et qui ne sont pas d'utilisation préférentielle, est donnée à l'Annexe A.

General Information

• Status: Published
• Publication Date: 26-May-2009
• ICS: 31.020 - Electronic components in general
• Technical Committee: TC 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: MT 60286-5 - TC 40/MT 60286-5
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 25-Apr-2018

Relations

• Amended By: IEC 60286-5:2003/AMD1:2009 - Amendment 1 - Packaging of components for automatic handling - Part 5: Matrix trays
• Effective Date: 05-Sep-2023
• Revised: IEC 60286-5:2018 - Packaging of components for automatic handling - Part 5: Matrix trays
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 60286-5
Second edition
2003-10
Packaging of components
for automatic handling –
Part 5:
Matrix trays
Emballage de composants pour
opérations automatisées –
Partie 5:
Supports matriciels
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the

60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,

edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the

base publication incorporating amendment 1 and the base publication incorporating

amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
x IEC Web Site (www.iec.ch)
x Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
x IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
x Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 60286-5
Second edition
2003-10
Packaging of components
for automatic handling –
Part 5:
Matrix trays
Emballage de composants pour
opérations automatisées –
Partie 5:
Supports matriciels
© IEC 2003 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale U
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
For price, see current catalogue

– 2 – 60286-5 © IEC:2003(E)
CONTENTS
FOREWORD . 4

1 Scope . 6

2 Material . 6

2.1 Electrostatic dissipative requirements . 6

2.2 Effect of properties . 6

2.3 Recycling and rigidity. 6

3 Mechanical stability . 6
3.1 Loaded tray . 6
3.2 Empty tray . 6
3.3 Outer edges. 7
4 Tray design, dimensions and other physical properties . 7
4.1 Tray design. 7
4.1.1 Number of pockets. 7
4.1.2 Orientation of pockets. 7
4.1.3 Design rules for pocket density . 7
4.2 Overall tray dimensions . 8
4.3 Cell dimensions . 8
4.4 Tray vacuum pick-up sites .10
4.4.1 Size .10
4.4.2 Centre .10
4.4.3 Perimeter.10
4.5 Detail features .10
4.6 Weight.10
4.7 Movement of components .10
4.8 Dimensional information .11
5 Polarity and orientation of components in the tray.14
5.1 Pin one.14
5.2 Loading .14
6 Tray stacking .14
6.1 Bundling .14
6.2 Top protection .14

6.3 Partial filling .14
6.4 Protrusion of components .14
6.5 Stack-up .14
6.6 Damaging of components .14
7 Missing components .14
8 Marking .15
Annex A (informative) List of existing matrix trays with wide anticipated use in the
electronic industries .16

60286-5 © IEC:2003(E) – 3 –
Figure 1– Sample of leaded packages…………………………………………………… . 9

Figure 2 – Sample of grid array packages . 9

Figure 3 – Tray main view .11

Figure 4 – Tray stacking details .12

Figure A.1 – Thin tray.17

Figure A.2 – Thick matrix .25

Table 1 – Height dimensions . 8

Table A.1 – Variations.19
Table A.2 – PGA variations .27

– 4 – 60286-5 © IEC:2003(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 5: Matrix trays
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60286-5 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.

This second edition cancels and replaces the first edition published in 1995 and constitutes a
technical revision.
This edition includes the following significant technical changes from the previous edition.
a) The generic rules for the design of matrix trays are given in this standard. Newly
developed trays which follow these rules will not be listed individually. Only those trays
which conform to the design rules set forth herein are classified as “standard trays” and
are thus preferred for use.
b) An update of the matrix trays, which do not conform to the design rules set forth herein,
are considered as “non-standard trays” and are not preferred for use, is listed in Annex A.

60286-5 © IEC:2003(E) – 5 –
The text of this standard is based on the following documents:

FDIS Report on voting
40/1341/FDIS 40/1364/RVD
Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

The committee has decided that the contents of this publication will remain unchanged until
2005. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

– 6 – 60286-5 © IEC:2003(E)
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 5: Matrix trays
1 Scope
This part of IEC 60286 describes the common dimensions, tolerances and characteristics of

the tray. It includes only those dimensions which are essential for the handling of the trays for
the stated purpose and for placing or removing components from the trays.
Matrix trays are designed to facilitate the transport and handling of electronic components
during their testing, baking, transport/storage, and final mounting by automatic placement
equipment.
The generic rules for their design are given in this standard. Newly developed trays which
follow these rules will not be listed individually . Only those trays which conform to the design
rules set forth herein are class
...

IEC 60286-5 ®
Edition 2.1 2009-05
INTERNATIONAL
STANDARD
Packaging of components for automatic handling –
Part 5: Matrix trays
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
IEC 60286-5 ®
Edition 2.1 2009-05
INTERNATIONAL
STANDARD
Packaging of components for automatic handling –
Part 5: Matrix trays
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
CM
ICS 31.020 ISBN 978-2-88910-094-1
– 2 – 60286-5 © IEC:2003+A1:2009(E)

CONTENTS
FOREWORD.4

1 Scope.6

2 Material .6

2.1 Electrostatic dissipative requirements.6

2.2 Effect of properties .6

2.3 Recycling and rigidity .6

3 Mechanical stability .6
3.1 Loaded tray .6
3.2 Empty tray.6
3.3 Outer edges .7
4 Tray design, dimensions and other physical properties .7
4.1 Tray design .7
4.1.1 Number of pockets .7
4.1.2 Orientation of pockets.7
4.1.3 Design rules for pocket density.7
4.2 Overall tray dimensions .8
4.3 Cell dimensions.8
4.4 Tray vacuum pick-up sites .10
4.4.1 Size.10
4.4.2 Centre .10
4.4.3 Perimeter .10
4.5 Detail features.10
4.6 Weight.10
4.7 Movement of components.10
4.8 Dimensional information .11
5 Polarity and orientation of components in the tray .13
5.1 Pin one.13
5.2 Loading .13
6 Tray stacking.13
6.1 Bundling.13
6.2 Top protection .14

6.3 Partial filling .14
6.4 Protrusion of components.14
6.5 Stack-up.14
6.6 Damaging of components .14
7 Missing components .14
8 Marking .14

Annex A (informative) List of existing matrix trays with wide anticipated use
in the electronic industries .15
Annex B (normative) Measurement methodology of the tray dimensions .27

60286-5 © IEC:2003+A1:2009(E) – 3 –

Figure 1 – Sample of leaded packages .9

Figure 2 – Sample of grid array packages.9

Figure 3 – Tray main view.11

Figure 4 – Tray stacking details .12

Figure A.1 – Thin tray .16

Figure A.2 – Thick matrix .24

Figure B.1 – Cross- sections of the outline dimensions .28

Figure B.2 – Tray thickness .28

Figure B.4 – Examples of tray warpage.28
Figure B.5 – Top view of a tray showing the measurement locations for the outline
dimensions .29
Figure B.6 – Measurement locations for tray thickness .30
Figure B.7 – Holding position in calliper jaws for measurement.30
Figure B.8 – Correction of a lift of the tray at the measurement point .30
Figure B.9 – Measurement locations for the stackable design .31
Figure B.10 – Measurement points for warpage .31

Table 1 – P and W dimension.7
Table 2 – Height dimensions.8
Table A.1 – Variations .18
Table A.2 – PGA variations.26

– 4 – 60286-5 © IEC:2003+A1:2009(E)

INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 5: Matrix trays
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60286-5 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This edition includes the following significant technical changes from the previous edition.
a) The generic rules for the design of matrix trays are given in this standard. Newly
developed trays which follow these rules will not be listed individually. Only those trays
which conform to the design rules set forth herein are classified as “standard trays” and
are thus preferred for use.
b) An update of the matrix trays, which do not conform to the design rules set forth herein,
are considered as “non-standard trays” and are not preferred for use, is listed in Annex A.

60286-5 © IEC:2003+A1:2009(E) – 5 –

This consolidated version of IEC 60286-5 consists of the second edition (2003) [documents
40/1341/FDIS and 40/1364/RVD] and its amendment 1 (2009) [documents 40/1942/FDIS and

40/1971/RVD].
The technical content is therefore identical to the base edition and its amendment and has

been prepared for user convenience.

It be
...

IEC 60286-5 ®
Edition 2.0 2003-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –
Part 5: Matrix trays
Emballage des composants pour opérations automatisées –
Partie 5: Supports matriciels
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 60286-5 ®
Edition 2.0 2003-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –

Part 5: Matrix trays
Emballage des composants pour opérations automatisées –

Partie 5: Supports matriciels
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX U
ICS 31.020 ISBN 978-2-8322-1325-4

– 2 – 60286-5  IEC:2003
CONTENTS
FOREWORD . 4

1 Scope . 6

2 Material . 6

2.1 Electrostatic dissipative requirements . 6

2.2 Effect of properties . 6

2.3 Recycling and rigidity . 6

3 Mechanical stability . 6
3.1 Loaded tray . 6
3.2 Empty tray . 6
3.3 Outer edges . 7
4 Tray design, dimensions and other physical properties . 7
4.1 Tray design . 7
4.1.1 Number of pockets . 7
4.1.2 Orientation of pockets. 7
4.1.3 Design rules for pocket density . 7
4.2 Overall tray dimensions . 8
4.3 Cell dimensions . 8
4.4 Tray vacuum pick-up sites . 10
4.4.1 Size . 10
4.4.2 Centre . 10
4.4.3 Perimeter . 10
4.5 Detail features . 10
4.6 Weight . 10
4.7 Movement of components . 10
4.8 Dimensional information . 11
5 Polarity and orientation of components in the tray . 14
5.1 Pin one . 14
5.2 Loading . 14
6 Tray stacking . 14
6.1 Bundling . 14
6.2 Top protection . 14

6.3 Partial filling . 14
6.4 Protrusion of components . 14
6.5 Stack-up . 14
6.6 Damaging of components . 14
7 Missing components . 14
8 Marking . 15

Annex A (informative) List of existing matrix trays with wide anticipated use in the
electronic industries . 16

60286-5  IEC:2003 – 3 –
Figure 1 – Sample of leaded packages…………………………………………………… . 9

Figure 2 – Sample of grid array packages . 9

Figure 3 – Tray main view . 11

Figure 4 – Tray stacking details . 12

Figure A.1 – Thin tray . 17

Figure A.2 – Thick matrix . 25

Table 1 – Height dimensions . 8

Table A.1 – Variations . 19
Table A.2 – PGA variations . 27

– 4 – 60286-5  IEC:2003
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 5: Matrix trays
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparent
...

IEC 60286-5 ®
Edition 2.1 2009-05
CONSOLIDATED
VERSION
VERSION
CONSOLIDÉE
colour
inside
Packaging of components for automatic handling –
Part 5: Matrix trays
Emballage des composants pour opérations automatisées –
Partie 5: Supports matriciels
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 60286-5 ®
Edition 2.1 2009-05
CONSOLIDATED
VERSION
VERSION
CONSOLIDÉE
colour
inside
Packaging of components for automatic handling –

Part 5: Matrix trays
Emballage des composants pour opérations automatisées –

Partie 5: Supports matriciels
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.020 ISBN 978-2-8322-1380-3

IEC 60286-5 ®
Edition 2.1 2009-05
REDLINE VERSION
VERSION REDLINE
colour
inside
Packaging of components for automatic handling –
Part 5: Matrix trays
Emballage des composants pour opérations automatisées –
Partie 5: Supports matriciels
– 2 – 60286-5  IEC:2003+A1:2009

CONTENTS
FOREWORD . 4

1 Scope . 6

2 Material . 6

2.1 Electrostatic dissipative requirements . 6

2.2 Effect of properties . 6

2.3 Recycling and rigidity . 6

3 Mechanical stability . 6
3.1 Loaded tray . 6
3.2 Empty tray . 6
3.3 Outer edges . 7
4 Tray design, dimensions and other physical properties . 7
4.1 Tray design . 7
4.1.1 Number of pockets . 7
4.1.2 Orientation of pockets. 7
4.1.3 Design rules for pocket density . 7
4.2 Overall tray dimensions . 8
4.3 Cell dimensions . 8
4.4 Tray vacuum pick-up sites . 10
4.4.1 Size . 10
4.4.2 Centre . 10
4.4.3 Perimeter . 10
4.5 Detail features . 10
4.6 Weight . 10
4.7 Movement of components . 10
4.8 Dimensional information . 10
5 Polarity and orientation of components in the tray . 15
5.1 Pin one . 15
5.2 Loading . 15
6 Tray stacking . 15
6.1 Bundling . 15
6.2 Top protection . 16

6.3 Partial filling . 16
6.4 Protrusion of components . 16
6.5 Stack-up . 16
6.6 Damaging of components . 16
7 Missing components . 16
8 Marking . 16

Annex A (informative) List of existing matrix trays with wide anticipated use in the
electronic industries . 17
Annex B (normative) Measurement methodology of the tray dimensions . 29

60286-5  IEC:2003+A1:2009 – 3 –

Figure 1 – Sample of leaded packages…………………………………………………… . 9

Figure 2 – Sample of grid array packages . 9

Figure 3 – Tray main view . 11

Figure 4 – Tray stacking details . 12

Figure A.1 – Thin tray . 17

Figure A.2 – Thick matrix . 25

Figure B.1 – Cross- sections of the outline dimensions . 30

Figure B.2 – Tray thickness . 30

Figure B.4 – Examples of tray warpage . 31
Figure B.5 – Top view of a tray showing the measurement locations for the outline
dimensions . 31
Figure B.6 – Measurement locations for tray thickness . 32
Figure B.7 – Holding position in calliper jaws for measurement . 32
Figure B.8 – Correction of a lift of the tray at the measurement point . 32
Figure B.9 – Measurement locations for the stackable design . 33
Figure B.10 – Measurement points for warpage . 33

Table 1 – P and W dimension . 7
Table 1 2 – Height dimensions . 8
Table A.1 – Variations . 19
Table A.2 – PGA variations . 27

– 4 – 60286-5  IEC:2003+A1:2009

INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –
...