iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61125:1992/AMD1:2004

(Amendment)

Amendment 1 - Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability

Amendment 1 - Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability

Amendement 1 - Isolants liquides neufs à base d'hydrocarbures - Méthodes d'essai pour évaluer la stabilité à l'oxydation

General Information

Status
Published
Publication Date
19-Apr-2004
ICS
17.220.99 - Other standards related to electricity and magnetism
29.040.10 - Insulating oils
Technical Committee
TC 10 - Fluids for electrotechnical applications
Drafting Committee
WG 21 - TC 10/WG 21
Current Stage
DELPUB - Deleted Publication
Completion Date
12-Jan-2018
Ref Project

Relations

Amends
IEC 61125:1992 - Unused hydrocarbon based insulating liquids - Test methods for evaluating the oxidation stability
Effective Date
05-Sep-2023
Revised
IEC 61125:2018 - Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state
Effective Date
05-Sep-2023

Buy Standard

IEC 61125:1992/AMD1:2004 - Amendment 1 - Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability Released:4/20/2004 Isbn:2831874769IEC 61125:1992/AMD1:2004 - Amendment 1 - Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability Released:4/20/2004 Isbn:2831874769
PreviousNext
Standard
IEC 61125:1992/AMD1:2004 - Amendment 1 - Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability Released:4/20/2004 Isbn:2831874769
English and French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NORME CEI
INTERNATIONALE
IEC
INTERNATIONAL
1992-08
STANDARD
AMENDEMENT 1
AMENDMENT 1
2004-04
Amendement 1
Isolants liquides neufs à base d'hydrocarbures –
Méthodes d'essai pour évaluer la stabilité
à l'oxydation
Amendment 1
Unused hydrocarbon-based insulating liquids –
Test methods for evaluating the oxidation stability

 IEC 2004 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
B
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 61125 Amend. 1  CEI:2004

AVANT-PROPOS
Le présent amendement a été établi par le comité d'études 10 de la CEI: Fluides pour

applications électrotechniques.

Le texte de cet amendement est issu des documents suivants:

FDIS Rapport de vote
10/577/FDIS 10/603/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l'approbation de cet amendement.
Le comité a décidé que le contenu de la publication de base et de ses amendements ne sera
pas modifié avant 2010. A cette date, la publication sera
• reconduite;
• supprimée;
• remplacée par une édition révisée, ou
• amendée.
_____________
Page 22
1.9.6 Facteur de dissipation diélectrique
Remplacer le texte de ce paragraphe par le nouveau texte suivant:
Préparer séparément les échantillons d’huile oxydée de la manière suivante : après avoir
retiré du dispositif d’oxydation les tubes à l’essai, boucher ces derniers et les stocker 24 h à
température ambiante (20 °C ± 5 °C). Pendant cette période, l’échantillon va refroidir et les
produits insolubles vont se déposer en fond de tube. Tra
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60599:2022(Main)
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis

IEC 60599:2022 describes how the concentrations of dissolved gases or free gases can be interpreted to diagnose the condition of oil-filled electrical equipment in service and suggest future action. This document is applicable to electrical equipment filled with mineral insulating oil and insulated with cellulosic paper or pressboard-based solid insulation. Information about specific types of equipment such as transformers (power, instrument, industrial, railways, distribution), reactors, bushings, switchgear and oil-filled cables is given only as an indication in the application notes. This document can be applied, but only with caution, to other liquid-solid insulating systems. In any case, the indications obtained are given only as guidance with resulting action undertaken only with proper engineering judgment.

  • Standard
    122 pages
    English language
    sale 15% off
  • Standard
    80 pages
    English and French language
    sale 15% off
IEC
IEC 60599:2015(Main)
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis

IEC 60599:2015 describes how the concentrations of dissolved gases or free gases may be interpreted to diagnose the condition of oil-filled electrical equipment in service and suggest future action. This standard is applicable to electrical equipment filled with mineral insulating oil and insulated with cellulosic paper or pressboard-based solid insulation. Information about specific types of equipment such as transformers (power, instrument, industrial, railways, distribution), reactors, bushings, switchgear and oil-filled cables is given only as an indication in the application notes. This standard may be applied, but only with caution, to other liquid-solid insulating systems. This third edition cancels and replaces the second edition published in 1999 and Amendment 1:2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) revision of 5.5, 6.1, 7, 8, 9, 10, A.2.6, A.3, A.7;
b) addition of new sub-clause 4.3;
c) expansion of the Bibliography;
d) revision of Figure 1;
e) addition of Figure B.4.

  • Standard
    119 pages
    English language
    sale 15% off
  • Standard
    78 pages
    English and French language
    sale 15% off
IEC
IEC 60666:2010(Main)
Detection and determination of specified additives in mineral insulating oils

IEC 60666:2010 provides methods concerning the detection and determination of specified additives in unused and used mineral insulating oils. The detection methods may be applied to assess whether or not a mineral insulating oil contains an additive as specified by the supplier. The determination methods are used for the quantitative determination of additives known to be present or previously detected by the appropriate detection method. The main changes with respect to the previous edition are listed below:
- a change in the title from "Detection and determination of specified anti-oxidant additives in insulating oils";
- new Annexes B and C which provide methods for the determination of two additives different from the anti-oxidants.

  • Standard
    64 pages
    English and French language
    sale 15% off
IEC
IEC 60970:2007(Main)
Insulating liquids - Methods for counting and sizing particles

Describes the sampling procedures and methods for the determination of particle concentration and size distribution. Three methods are specified. One uses an automatic particle size analyser, working on the light interruption principle. The other two use an optical microscope, in either the transmitted light or incident light mode, to count particles collected on the surface of a membrane filter. The optical microscope methods are described in ISO 4407. All three methods are applicable to both used and unused insulating liquids. Annex A contains an alternative sampling procedure using a syringe and Annex B reports a reference for the calibration of automatic particle counters. The significant technical changes with respect to the previous edition are as follows: - new calibration procedures for automated laser particle; - three figures contamination code; - new procedure of sample pre-treatment when automated laser counter method are used.

  • Standard
    37 pages
    English and French language
    sale 15% off
IEC
IEC 60599:1999/AMD1:2007(Amendment)
Amendment 1 - Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis
  • Standard
    8 pages
    English and French language
    sale 15% off
IEC
IEC 60567:2005(Main)
Oil-filled electrical equipment - Sampling of gases and of oil for analysis of free and dissolved gases - Guidance

Deals with the techniques for sampling free gases from gas-collecting relays and for sampling oil from oil-filled equipment such as power and instrument transformers, reactors, bushings, oil-filled cables and oil-filled tank-type capacitors. Three methods of sampling free gases and three methods of sampling oil are described; the choice between the methods often depends on the apparatus available and on the quantity of oil needed for analysis. Before analysing the gases dissolved in oil, they must first be extracted from the oil. Three basic methods are described, one using extraction by vacuum (Toepler and partial degassing), another by displacement of the dissolved gases by bubbling the carrier gas through the oil sample (stripping), and the last one by partition of gases between the oil sample and a small volume of the carrier gas (head space). The gases are analysed quantitatively after extraction by gas chromatography; a method of analysis is described. Free gases from gas-collecting relays are analysed without preliminary treatment. The preferred method for assuring the performance of the gas extraction and analysis equipment, considered together as a single system, is to degas samples of oil prepared in the laboratory and containing known concentrations of gases ("gas-in-oil standards") and quantitatively analyse the gases extracted. Two methods of preparing gas-in-oil standards are described. For daily calibration checks of the chromatograph, it is convenient to use a standard gas mixture containing a suitable known amount of each of the gas components to be in a similar ratio to the commons ratios of the gases extracted from transformer oils. The techniques described take account, on the one hand, of the problems peculiar to analyses associated with acceptance testing in the factory, where gas contents of oil are generally very low and, on the other hand, of the problems imposed by monitoring equipment in the field, where transport of samples may be by un-pressurized air freight and where considerable differences in ambient temperature may exist between the plant and the examining laboratory. The main changes with respect to the previous edition are listed below. Since the publication of the second edition of this standard, a number of new gas extraction methods have been developed and are commercially available, such as mercury-free versions of the standard Toepler and partial degassing methods, which are referenced to in Annex C of the present edition. The head space method, based on a new concept for the extraction of gases from oil is introduced as a full method in this third edition, and reference is made to a simplified version of it also in Annex C (shake test method). More sensitive chromatographic techniques have also been developed since the last edition, and are presented in this third edition.

  • Standard
    64 pages
    English language
    sale 15% off
  • Standard
    64 pages
    French language
    sale 15% off
  • Standard
    127 pages
    English and French language
    sale 15% off
IEC
IEC 60247:2004(Main)
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity

Describes methods for the determination of the dielectric dissipation factor, relative permittivity and d.c. resistivity of any insulating liquid material at the test temperature. The methods are primarily intended for making reference tests on unused liquids. They can also be applied to liquids in service in transformers, cables and other electrical apparatus. However the method is applicable to a single phase liquid only. When it is desired to make routine determinations, simplified procedures, as described in Annex C, may be adopted. With insulating liquids other than hydrocarbons, alternative cleaning procedures may be required. The main changes from the previous edition deal with the preferred measurement method.

  • Standard
    53 pages
    English and French language
    sale 15% off
IEC
IEC 60599:1999(Main)
Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis

Describes how the concentrations of dissolved gases or free gases may be interpreted to diagnose the condition of oil-filled electrical equipment in service and suggests future action. Applicable to electrical equipment filled with mineral insulating oil and insulated with cellulosic paper or pressboard-based solid insulation. Information about specific types of equipment such as transformers (power, instrument, industrial, railways, distribution), reactors, bushings, switchgear and oil-filled cables is given only as an indication in the application notes. May be applied only with caution to other liquid-solid insulating systems. In any case, the indications obtained should be viewed only as guidance and any resulting action should be undertaken only with proper engineering judgement.

  • Standard
    69 pages
    English and French language
    sale 15% off
  • Standard
    69 pages
    English and French language
    sale 15% off
IEC
IEC 61868:1998(Main)
Mineral insulating oils - Determination of kinematic viscosity at very low temperatures

Specifies a procedure for the determination of the kinematic viscosity of mineral insulating oils, both transparent and opaque, at very low temperatures, after a cold soaking period of at least 20 h, by measuring the time for a volume of liquid to flow under gravity throught a calibrated glass capillary viscometer. Applies at all temperatures to both Newtonian and non-Newtonian liquids having viscosities of up to 20 000 mm2/s.

  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 60814:1997(Main)
Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration

Describes methods for the determination of water in insulating liquids and in oil-impregnated cellulosic insulation with coulmetrically generated Karl Fischer reagent.

  • Standard
    43 pages
    English and French language
    sale 15% off