ISO/IEC 14543-5-22:2010

Information technology - Home electronic system (HES) architecture - Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - Application profile - File profile

ISO/IEC 14543-5-22:2010(E) specifies the file data streaming application profile, device interaction flow model, the request and response messages in the device interaction process, and the service description format of the devices based on Intelligent Grouping and Resource Sharing (IGRS), ISO/IEC 14543-5-1. It is applicable to resource sharing and service collaboration of file data stream among computers, consumer electronics, and communication devices in a Local Area Network (LAN) or Personal Area Network (PAN) environment, especially in a wireless dynamic network.

General Information

• Status: Published
• Publication Date: 10-Feb-2010
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 35.240.67 - IT applications in building and construction industry
• Technical Committee: ISO/IEC JTC 1/SC 25 - Interconnection of information technology equipment
• Current Stage: PPUB - Publication issued
• Start Date: 15-Jan-2010
• Completion Date: 11-Feb-2010

Standards Content (Sample)

ISO/IEC 14543-5-22
Edition 1.0 2010-02
INTERNATIONAL
STANDARD
Information technology – Home electronic system (HES) architecture –
Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and
Class 3 – Application profile – File profile

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and definitions clause of
IEC publications issued between 2002 and 2015. Some
IEC Customer Service Centre - webstore.iec.ch/csc entries have been collected from earlier publications of IEC
If you wish to give us your feedback on this publication or TC 37, 77, 86 and CISPR.

need further assistance, please contact the Customer Service

Centre: [e-mail].
ISO/IEC 14543-5-22
Edition 1.0 2010-02
INTERNATIONAL
STANDARD
Information technology – Home electronic system (HES) architecture –

Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and

Class 3 – Application profile – File profile

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 35.240.67 ISBN 2-8318-1076-1

– 2 – 14543-5-22 © ISO/IEC:2010(E)
CONTENTS
FOREWORD.4
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Abbreviations .6
4 Conformance.6
5 System .7
5.1 Application scenario .7
5.2 Design criteria .7
5.2.1 Relationship between file profile and IGRS .7
5.2.2 Relationship between file profile and transport protocols .7
5.2.3 Relationship between file profile and existing file sharing system .7
5.2.4 Relationship between file profile and file format.8
5.2.5 Device supported by file profile.8
5.3 Interaction model.8
6 Interaction flow of IGRS file profile .8
6.1 Overview .8
6.2 Simple Interaction Flow .9
6.3 Complete interaction flow .10
7 FileServer.13
7.1 General .13
7.2 FileAccessManagement Service .14
7.2.1 General .14
7.2.2 FileAccessManagement Service Type.14
7.2.3 FileAccessManagement Service Attribute .14
7.2.4 Data Types of FileAccessManagement Service.15
7.2.5 Invocation interface of FileAccessManagement Service.15
7.2.6 FileAccessManagement Service error codes definition .25
7.3 FileConnectionManagement Service.25
7.3.1 General .25
7.3.2 FileConnectionManagement Service Type .25
7.3.3 FileConnectionManagement Service Attribute.26
7.3.4 FileConnectionManagement Service Data Type.26
7.3.5 Invocation Interface of FileConnectionManagement Service .26
7.3.6 FileConnectionManagement Service error codes definition .28
8 FileClient.28
8.1 General .28
8.2 FileClient Engine .29
9 Session .29
9.1 Session setup.29
9.1.1 General .29
9.1.2 Session setup condition.29
9.1.3 Session setup process.29
9.2 Session termination.29
10 Service invocation message format .30

14543-5-22 © ISO/IEC:2010(E) – 3 –
10.1 General .30
10.2 Service invocation request message .30
10.3 Service invocation response message.31
10.4 Content directory object update notification message .32
10.5 Service attribute update notification message.33
Annex A (normative) Description of data type generation rules .35
Annex B (normative) Information device – IGRS – File profile message format .38
Annex C (normative) File profile – FileAccessManagement Service description.wsdl .59
Annex D (normative) File profile – FileConnectionManagement Service
description.wsdl .69
Bibliography.72

Figure 1 – IGRS file profile interaction model.8
Figure 2 – Simple interaction flow model.10
Figure 3 – Complete Interaction Flow of Shared File.13

Table 1 – FileAccessManagement Service Attribute List .14
Table 2 – FileAccessManagement Service Data Type .15
Table 3 – FileConnectionManagement Service Attribute .26
Table 4 – FileConnectionManagement Service Data Type .26
Table 5 – Service invocation request message .30
Table 6 – Service invocation response message.31
Table 7 – Content directory object update notification message .32
Table 8 – Service attribute update notification message.34
Table B.1 – IGRS file profile service invocation request message .38
Table B.2 – Service invocation response message .39
Table B.3 – File/Directory object update notification message.40
Table B.4 – Service attribute update notification message .42

– 4 – 14543-5-22 © ISO/IEC:2010(E)
INFORMATION TECHNOLOGY –
HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE –

Part 5-22: Intelligent grouping and resource sharing for HES
Class 2 and Class 3 – Application profile – File profile

FOREWORD
1) ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission) form the
specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in
the development of International Standards. Their preparation is entrusted to technical committees; any ISO and
IEC member body interested in the subject dealt with may participate in this preparatory work. International
governmental and non-governmental organizations liaising with ISO and IEC also participate in this preparation.
2) In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
3) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC and ISO member bodies.
4) IEC, ISO and ISO/IEC publications have the form of recommendations for international use and are accepted
by IEC and ISO member bodies in that sense. While all reasonable efforts are made to ensure that the
technical content of IEC, ISO and ISO/IEC publications is accurate, IEC or ISO cannot be held responsible for
the way in which they are used or for any misinterpretation by any end user.
5) In order to promote international uniformity, IEC and ISO member bodies undertake to apply IEC, ISO and
ISO/IEC publications transparently to the maximum extent possible in their national and regional publications.
Any divergence between any ISO/IEC publication and the corresponding national or regional publication
should be clearly indicated in the latter.
6) ISO and IEC provide no marking procedure to indicate their approval and cannot be rendered responsible for
any equipment declared to be in conformity with an ISO/IEC publication.
7) All users should ensure that they have the latest edition of this publication.
8) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual experts
and members of their technical committees and IEC or ISO member bodies for any personal injury, property
damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees)
and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC publication or any other IEC,
ISO or ISO/IEC publications.
9) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
10) Attention is drawn to the possibility
...