Amendment 1 - Surface cleaning appliances - Part 7: Dry cleaning robots for household or similar use - Methods for measuring the performance

Amendement 1 - Appareils de nettoyage des sols - Partie 7: Robots de nettoyage à sec à usage domestique ou analogue - Méthodes de mesure de l'aptitude à la fonction

General Information

Status
Published
Publication Date
22-Jun-2022
Current Stage
PPUB - Publication issued
Completion Date
23-Jun-2022
Ref Project

Buy Standard

Standard
IEC/ASTM 62885-7:2020/AMD1:2022 - Amendment 1 - Surface cleaning appliances - Part 7: Dry cleaning robots for household or similar use - Methods for measuring the performance
English and French language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

IEC/ASTM 62885-7
Edition 1.0 2022-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
AMENDMENT 1
AMENDEMENT 1
Surface cleaning appliances –
Part 7: Dry cleaning robots for household or similar use – Methods for
measuring the performance
Appareils de nettoyage des sols –
Partie 7: Robots de nettoyage à sec à usage domestique ou analogue –
Méthodes de mesure de l’aptitude à la fonction
IEC/ASTM 62885-7:2020-10/AMD1:2022-06(en-fr)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2022 IEC, Geneva, Switzerland
Copyright © 2022 ASTM International

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or

by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing being

secured. Requests for permission to reproduce should be addressed to either IEC at the address below or IEC’s

member Natio nal Committee in the country of the requester or from ASTM.
IEC Secretariat ASTM Headquarters
3, rue de Varembé 100 Barr Harbor Drive
CH-1211 Geneva 20 West Conshohocken, PA 19428-2959
Switzerland United States of America
Tel.: +41 22 919 02 11 mailto:mkhooper@astm.org
info@iec.ch www.astm.org
www.iec.ch
About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

International Standards for all electrical, electronic and related technologies.
About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch

The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the

variety of criteria (reference number, text, technical publications previews. With a subscription you will always have

committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.

and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC

La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des

Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC

Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la

plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez

webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un

La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour

en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.

comité d’études, …). Elle donne aussi des informations sur les

projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org

Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 300 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 19 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC Products & Services Portal - products.iec.ch
---------------------- Page: 2 ----------------------
IEC/ASTM 62885-7
Edition 1.0 2022-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
AMENDMENT 1
AMENDEMENT 1
Surface cleaning appliances –
Part 7: Dry cleaning robots for household or similar use – Methods for
measuring the performance
Appareils de nettoyage des sols –
Partie 7: Robots de nettoyage à sec à usage domestique ou analogue –
Méthodes de mesure de l’aptitude à la fonction
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.080 ISBN 978-2-8322-3894-3

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 3 ----------------------
– 2 – IEC/ASTM 62885-7:2020/AMD1:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SURFACE CLEANING APPLIANCES –
Part 7: Dry cleaning robots for household or similar use –
Methods for measuring the performance
AMENDMENT 1
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

may participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence between

any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. IEC shall not be held responsible for identifying any or all such patent rights.

Amendment 1 to IEC 62885-7:2020 has been prepared by subcommittee 59F: Surface cleaning

appliances, of IEC technical committee 59: Performance of household and similar electrical

appliances.
The text of this Amendment is based on the following documents:
Draft Report on voting
59F/424/CDV 59F/432A/RVC

Full information on the voting for its approval can be found in the report on voting indicated in

the above table.
The language used for the development of this Amendment is English.
---------------------- Page: 4 ----------------------
IEC/ASTM 62885-7:2020/AMD1:2022 – 3 –
© IEC 2022

This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in

accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available

at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are

described in greater detail at www.iec.ch/standardsdev/publications/.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under webstore.iec.ch in the data related to the

specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The "colour inside" logo on the cover page of this document indicates

that it contains colours which are considered to be useful for the correct understanding

of its contents. Users should therefore print this document using a colour printer.

___________
INTRODUCTION

The following changes to IEC 62885-7:2020 concern Clause 1, and Subclauses 8.3.2.1 and

9.1.2.

The reason for this is to clarify the area of application of this standard and to align the

specification on carpets with IEC 62885-2. A new annex on test materials is added as Annex D.

---------------------- Page: 5 ----------------------
– 4 – IEC/ASTM 62885-7:2020/AMD1:2022
© IEC 2022
1 Scope
Add the following new paragraph before the last paragraph.

Due to the nature of the way this product operates in the home, comparisons with other types

of surface cleaning appliances (e.g. dry vacuum cleaners) should not be made unless otherwise

indicated. The cleaning performance methods, in particular, are only used to make comparisons

with other dry cleaning robots and not with manually operated vacuum cleaner products.

8.3.2.1 Test bed
Replace the subclause with the following.
Refer to 9.3.

Exception: remove all legs (table, chair, and sofa legs). Replace the carpet with a test carpet

of the same type as defined in 9.1.2 except in terms of length and width.
9.1.2 Carpet
Replace the subclause with the following.
9.1.2.1 General

The test bed is identical to that defined in 9.1.1, except that the floor is covered with test carpet.

Figure 19 shows the configuration of the test bed.
Dimensions in millimetres
Key
W width of robot cleaning head
RUT robot under test
Figure 19 – Straight-line carpet test bed configuration
---------------------- Page: 6 ----------------------
IEC/ASTM 62885-7:2020/AMD1:2022 – 5 –
© IEC 2022
9.1.2.2 Test carpets

The preferred test carpet for international testing and inter-laboratory comparative testing is the

Wilton type carpet. There are three additional carpets of different quality related to cleaning

performance that may be used. These carpets in verified versions are available from suppliers

listed on the IEC website (see Annex D). Specifications on these carpet types are given for

guidance in IEC TS 62885-1.

Category A, B and C test carpets are known to be well controlled and managed in terms of

quality for repeatability and reproducibility for tests of manually operated cleaning devices.

The repeatability and reproducibility of tests with Category A, B and C test carpets for a dry

cleaning robot have not yet been verified, but their assessment is under consideration.

NOTE Category A, B and C test carpets are included for potential use because these carpe

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.