IEC 62386-202:2009

Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1)

IEC 62386-202:2009 specifies a protocol and test procedures for the control by digital signals of electronic control gear for use on a.c. or d.c. supplies, associated with self-contained emergency lighting. This Part 202 is intended to be used in conjunction with IEC 62386-101 and IEC 62386-102, which contain general requirements for the relevant product type (control gear or control devices).

Interface d'éclairage adressable numérique - Partie 202: Exigences particulières pour les appareillages de commande - Blocs autonomes d'éclairage de secours (dispositifs de type 1)

La CEI 62386-202:2009 spécifie un protocole et des méthodes d'essai pour la commande par des signaux numériques des appareillages électroniques destinés à être utilisés dans les alimentations alternatives ou continues, associés aux blocs autonomes d'éclairage de secours. Cette Partie 206 est destinée à être utilisée conjointement avec la CEI 62386-101 et la CEI 62386-102, qui contiennent les exigences générales relatives au type de produit concerné (appareillage ou dispositifs de commande).

General Information

• Status: Published
• Publication Date: 08-Jun-2009
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 29.140.50 - Lighting installation systems
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: SC 34C - Auxiliaries for lamps
• Current Stage: DELPUB - Deleted Publication
• Start Date: 29-Jun-2018
• Completion Date: 15-Dec-2022

Relations

• Revised: IEC 62386-202:2022 - Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1)
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 62386-202 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Digital addressable lighting interface –
Part 202: Particular requirements for control gear – Self-contained emergency
lighting (device type 1)
Interface d’éclairage adressable numérique –
Partie 202: Exigences particulières pour les appareillages de commande – Blocs
autonomes d'éclairage de secours (dispositifs de type 1)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 62386-202 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Digital addressable lighting interface –
Part 202: Particular requirements for control gear – Self-contained emergency
lighting (device type 1)
Interface d’éclairage adressable numérique –
Partie 202: Exigences particulières pour les appareillages de commande – Blocs
autonomes d'éclairage de secours (dispositifs de type 1)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XE
CODE PRIX
ICS 29.140.50; 29.140.99 ISBN 978-2-88910-688-2
– 2 – 62386-202 © IEC:2009
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
2 Normative references .8
3 Terms and definitions .8
4 General .10
5 Electrical specifications .10
6 Interface power suppy .10
7 Transmission protocol structure.10
8 Timing .10
9 Method of operation .10
10 Declaration of variables .14
11 Definition of commands .15
12 Test procedures .26
Annex A (informative) Examples .104
Bibliography.107

Figure 1 – Example of light level definitions .12
Figure 2 – Modes of operation .13
Figure 3 – Application extended control or configuration command sequence example .16
Figure 4 – Test sequence 'Features' .27
Figure 5 – Test sequence 'RESET'.30
Figure 6 – Test sequence '100 ms-timeout' .32
Figure 7 – Test sequence 'Commands in-between' .34
Figure 8 – Test sequence 'Persistent memory' .36
Figure 9 – Test sequence 'ON AND OFF'.39
Figure 10 – Test sequence 'OFF WITH FADING'.41
Figure 11 – Test sequence 'Physical address allocation'.42
Figure 12 – Test sequence 'QUERY LAMP POWER ON'.44
Figure 13 – Test sequence 'REST' .45
Figure 14 – Test sequence 'INHIBIT'.47
Figure 15 – Test sequence 'START/STOP FUNCTION TEST' .48
Figure 16 – Test sequence 'FUNCTION TEST FAILURE' .50
Figure 17 – Test sequence 'FUNCTION TEST REQUEST PENDING'.52
Figure 18 – Test sequence 'START/STOP DURATION TEST' .53
Figure 19 – Test sequence 'DURATION TEST FAILURE' .54
Figure 20 – Test sequence 'DURATION TEST REQUEST PENDING'.56
Figure 21 – Test sequence 'TESTS IN PARALLEL' .58
Figure 22 – Test sequence 'LAMP TIMER' .59
Figure 23 – Test sequence 'STOP PENDING TEST' .60
Figure 24 – Test sequence 'STORE THE DTR AS EMERGENCY LEVEL' .62

62386-202 © IEC:2009 – 3 –
Figure 25 – Test sequence 'EMERGENCY LEVEL vs. MIN / MAX' .64
Figure 26 – Test sequence 'STORE TEST TIMING'.66
Figure 27 – Test sequence 'EXECUTE AUTOMATIC TEST' .68
Figure 28 – Test sequence 'STORE TEST EXECUTION TIMEOUT' .70
Figure 29 – Test sequence 'STORE PROLONG TIME' .72
Figure 30 – Test sequence 'START IDENTIFICATION'.73
Figure 31 – Test sequence 'INTERFACE FAILURE' .74
Figure 32 – Test sequence 'QUERY BATTERY CHARGE'.75
Figure 33 – Test sequence 'QUERY HARDWIRED INHIBIT'.76
Figure 34 – Test sequence 'QUERY HARDWIRED SWITCHED MAINS POWER' .77
Figure 35 – Test sequence 'QUERY PHYSICAL SELECTED' .78
Figure 36 – Test sequence 'REST: APPLICATION EXTENDED COMMAND
SEQUENCE' .80
Figure 37 – Test sequence 'INHIBIT & TEST: APPL. EXT. COMMAND SEQUENCES' .82
Figure 38 – Test sequence 'RESET FT DONE FLAG: APPL. EXT. COMMAND
SEQUENCE' .84
Figure 39 – Test sequence 'RESET DT DONE FLAG: APPL. EXT. COMMAND
SEQUENCE' .86
Figure 40 – Test sequence 'CONFIGURATION: Other command after Enable Device
Type 1 .88
Figure 41 – Test sequence 'CONFIGURATION: 100ms timeout'.90
Figure 42 – Test sequence 'CONFIGURATION: Commands in-between' .92
Figure 43 – Test sequence 'QUERY: Other command after Enable Device Type 1' .93
Figure 44 – Test sequence 'START IDENTIFICATION: APPL. EXT. COMMAND
SEQUENCE' .95
Figure 45 – Test sequence 'Extended RESET’ .97
Figure 46 – Test sequence 'Extended PERSISTENT MEMORY'.99
Figure 47 – Test sequence 'Restore Factory Settings'.101
Figure 48 – Test sequence 'Reserved DTR Selected Function' .102
Figure 49 – Test sequence 'QUERY EXTENDED VERSION NUMBER' . 103
Figure A.1 – Duration test sequence example .105
Figure A.2 – Timing diagram for function and duration tests. 105

Table 1 – Declaration of additional variables.14
Table 2 – Summary of the application extended command set .25
Table 3 – Types of emergency control gear .26
Table 4 – List of test sequences 'Configuration commands' .28
Table 5 – Parameters for test sequences 'RESET' .29
Table 6 – Parameters for test sequences '100 ms-timeout' .31
Table 7 – Parameters for test sequences 'Commands in-between' .33
Table 8 – Parameters for test sequences 'Persistent memory' .35
Table 9 – List of test sequences 'A
...